BoatBanter.com - View Single Post

Mr. Luddite

On 4/22/2016 1:23 PM, wrote:
I am watching Henc's pool again after he went back to Europe. It was
greener than Kermit the frog the other day. I am still not convinced.
I bumped up the cell current after I got it cleaned up.

Don't know what system your friend has but on mine there was no way to
"bump up" the cell current. It draws what it draws, depending on the
salt level. At 3400 ppm, that was about 6 or 7 amps. When it turned on
it would jump up and peak at about 10 amps, then drop to 6 or 7.

What you *can* do is increase the duty cycle, meaning how often the cell
operates. I used to start at 50 percent at the beginning of the
summer and drop it to 40 percent by August.

Also, the cell won't work unless the water temp is 64 degrees or above.
It also won't work if the pool water is low in salt. Mine told you
that the salt level was low or very low. You can also tell by how much
current the cell is drawing. If it drops to 4 or 5 amps or less, the
salt level is way too low and you are not generating any chlorine.