Hi,

I am new to boating and screwed up my lower unit.
I think I stripped the gears because at one position the prop will rotate
freely while in gear (forward).
I removed the 5 bolts below the anticavitation plate and the lower unit
has dropped an inch but is being held by the shifting linkage rod.
Am I looking for trouble or can I remove the lower unit easily.
I think the shifting rod can be freed up from under the carburator(s)
Would I then slide the whole rod out?
Would I mess up the shifting setup?
I have all winter to work on this and so far it has been interesting,
Thanks for the responses in advance,

Brian Silver, Little Long Lake, Ontario, Canada.