View Single Post
  #14   Report Post  
posted to rec.boats.cruising
Bruce in bangkok Bruce in bangkok is offline
external usenet poster
 
First recorded activity by BoatBanter: Jun 2014
Posts: 9
Default I spent all afternoon on a stupid NMEA 0183 adapter cable . . .

On Sun, 24 Aug 2014 20:53:00 -0400, "Sir Gregory Hall, Esq."
wrote:

On Mon, 25 Aug 2014 06:59:51 +0700, Bruce in Bangkok
wrote:

On Sun, 24 Aug 2014 15:47:41 -0400, "Sir Gregory Hall, Esq."
wrote:

On Sun, 24 Aug 2014 13:59:53 +0700, Bruce in Bangkok
wrote:


But, as Wayne suggested, if you reverse the diode's connection they
should, if originally installed backward, allow current flow. If not
than (1) there is something else wrong, or (2) the diode is faulty.


I wish you'd shut up as you're obviously stupid.

On a two-wire DC circuit there is a positive
wire and a negative wire. If there is a diode
on the positive wire and it's installed backwards
then any positive current *sees* no circuit.

If one were to hook the negative wire to the
positive wire, current might flow but the
radio wouldn't know what to do with it. It
might even damage the radio. You and Wayne
are so stupid you seem to think an NMEA
circuit is like a light bulb in that it
works either way. Duh!


Are you being deliberately obtuse? Or are you just stupid?

If you connect a diode in series with a DC circuit, in either the
positive or the negative leg, current will flow through the diode if
it is connected correctly. If current does not flow then reverse the
connections to the diode. No one was talking about connecting the
positive leg to the negative leg of the circuit.


That's not what Wayne said. He said, and I quote, "I suspect that if
you had reversed the two wires that it would have worked fine."

Reversing the *two wires* means connecting negative to positive.

And you agreed with that little bit of folly.


Sorry, your ignorance seems to be showing again. Most diodes have two
connections, sometimes labeled Cathode and Anode, and sometimes marked
"+" and "-". To "Reverse the connecting to the diode one would connect
the wire originally connected to the Cathode to the Anode and
vise-versa.

Now, even a nephrite electrician would be able to figure that out so
apparently your electrical knowledge is extremely limited, or you are
just trying to be an asshole.

--
Cheers,

Bruce in Bangkok