Home |
Search |
Today's Posts |
#1
posted to rec.boats.cruising,rec.boats.building
|
|||
|
|||
SS tubing supply (was bending)
If you want to see how I did my rails, you can go to my Projects
gallery at http://justpickone.org/skip/gallery/...=64 0&start=0 and look in the July segments; I think most of them are in the later one. However, this was about sourcing. My SS tube was 24', .065, 316 mirror. I got it at Taco Metals in St. Pete at $80 a stick. That said, the single most valuable in cost/benefit, both in cosmetic and real terms, project (and I have literally pages of them!) I've done on this boat is our railings project. Including cast 316 SeaDog fittings, less than a grand. L8R Skip Morgan 461 #2 SV Flying Pig KI4MPC http://tinyurl.com/384p2 The vessel as Tehamana, as we bought her "Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover." - Mark Twain |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bending SS Tubing | Boat Building | |||
Source of supply form sliding weather proofing boots? | Electronics |