Hi All,

I have a Johnson "Seahorse" 9.9 HP Model No 10R 74S - Serial No. C36253.

Started it up in a barrel ready to use after several years and it ran
beautifully with the water pump operating fine - after a few minutes the
water stopped spurting out and I switched the motor off.

I guess that the pump has failed and I need to know how to get to the water
pump.

Is there anyone out there who can either sell me a manual or can explain how
I can remove the old pump and replace with a new one

Also where can I order new parts for such an old outboard.


--
Best Regards - Trevor Ball

9,9 hp 1974:

Waterpump kit OE:394711 ?? or 389711 ??
Watepump kit from Sierra : 18-3327

Impaller OE: 386084
Impaller Sierra : 18-3050

Where ? http://www.keypart.com/index2.htm ?
Or other places , parts are no problem .
Manual , Sierra part no : 18-0068 Johnson/Evinrude 2HK til 40HK from
1973-1990 mod

Sierra http://www.sierramarine.com/

Hope this will help

Arne Kjetil




"tregonissy" skrev i melding
...

Hi All,

I have a Johnson "Seahorse" 9.9 HP Model No 10R 74S - Serial No. C36253.

Started it up in a barrel ready to use after several years and it ran
beautifully with the water pump operating fine - after a few minutes the
water stopped spurting out and I switched the motor off.

I guess that the pump has failed and I need to know how to get to the
water
pump.

Is there anyone out there who can either sell me a manual or can explain
how
I can remove the old pump and replace with a new one

Also where can I order new parts for such an old outboard.


--
Best Regards - Trevor Ball

"Arne Kjetil" skrev i melding
...
9,9 hp 1974:

Waterpump kit OE:394711 ?? or 389711 ??
Watepump kit from Sierra : 18-3327

Impaller OE: 386084
Impaller Sierra : 18-3050

Where ? http://www.keypart.com/index2.htm ?
Or other places , parts are no problem .
Manual , Sierra part no : 18-0068 Johnson/Evinrude 2HK til 40HK from
1973-1990 mod

ISBN: 0892875542
http://www.amazon.co.uk/exec/obidos/...866296-6472402


Sierra http://www.sierramarine.com/

Hope this will help

Arne Kjetil




"tregonissy" skrev i melding
...

Hi All,

I have a Johnson "Seahorse" 9.9 HP Model No 10R 74S - Serial No. C36253.

Started it up in a barrel ready to use after several years and it ran
beautifully with the water pump operating fine - after a few minutes the
water stopped spurting out and I switched the motor off.

I guess that the pump has failed and I need to know how to get to the
water
pump.

Is there anyone out there who can either sell me a manual or can explain
how
I can remove the old pump and replace with a new one

Also where can I order new parts for such an old outboard.


--
Best Regards - Trevor Ball

It is not uncommon for the "peehole" to plug up. Work backwards on this. If
the engine does not overheat the pump is working fine but the peehole is
plugged up.