Marking Spraydecks
 

I have some black neoprene decks I want to mark up for my club.

Does anybody have any recommendations on what to use? I do not really want
to damage the decks with some solvent based paint.

TIA

Peter



--
Add "bypass" to subject line to email this address. All others rejected.

Marking Spraydecks
 

In article , Peter
wrote:
I have some black neoprene decks I want to mark up for my club.

Does anybody have any recommendations on what to use? I do not really want
to damage the decks with some solvent based paint.


Off to your local computer shop and purchase a pack of Transfer Paper - print
up your logo / pic / name or whatever and iron on to your deck. Don't forget
to reverse everything before printing...


Allan Bennett
Not a fan of ironing

--

Marking Spraydecks
 

"Allan Bennett" wrote in message
...
In article , Peter
wrote:
I have some black neoprene decks I want to mark up for my club.

Does anybody have any recommendations on what to use? I do not really
want
to damage the decks with some solvent based paint.


Off to your local computer shop and purchase a pack of Transfer Paper -
print
up your logo / pic / name or whatever and iron on to your deck. Don't
forget
to reverse everything before printing...


Allan Bennett
Not a fan of ironing

--


Not a bad idea. Any experience of how long a transfer would last?
I am not sure about the idea of ironing the deck. Worth a try I guess.

Thanks

P


--
Add "bypass" to subject line to email this address. All others rejected.

Marking Spraydecks
 

Allan Bennett wrote in message

Not a fan of ironing

You might not appreciate this then.... ;-)

http://www.extremeironing.com/

Marking Spraydecks
 

"roo" wrote in message
om...
Allan Bennett wrote in message

Not a fan of ironing

You might not appreciate this then.... ;-)

http://www.extremeironing.com/


Soo.... ironing the transfer on the deck whilst going down a grade IV rapid
seems to be the thing to do...

;-)

--
Add "bypass" to subject line to email this address. All others rejected.

Marking Spraydecks
 

In article , roo
wrote:
Allan Bennett wrote in message

Not a fan of ironing

You might not appreciate this then.... ;-)

http://www.extremeironing.com/

Definitely not!


Allan Bennett
Not a fan of ever-decreasing circles

--

Marking Spraydecks
 

In article ,
Peter wrote:

Not a bad idea. Any experience of how long a transfer would last?
I am not sure about the idea of ironing the deck. Worth a try I guess.

Don't do it!

The transfers only really work on light coloured backgrounds and the iron
has to be on the hottest setting - way above the melting point of the
rubber in neoprene.

Go to your local DIY store and get a tube of white silicon sealant. With
the smallest nozzle size you should be able write on the neoprene. Should
be quite durable when dry - especially if you apply to an area which isn't
over-stretched.

Best wishes

Keith

--
__ _ _ @ + "I took | Water Ramblers
|\/| |_ |_) |_) \/ /\ up canoeing instead of climbing | Canoe Club
| | |__ | \ | \ / \__/ when I realised I could swim | On the R. Ouse
but not fly!" |at Harrold, Beds

Marking Spraydecks
 

In message , Keith Meredith
writes
In article ,
Peter wrote:

Not a bad idea. Any experience of how long a transfer would last?
I am not sure about the idea of ironing the deck. Worth a try I guess.

Don't do it!

The transfers only really work on light coloured backgrounds and the iron
has to be on the hottest setting - way above the melting point of the
rubber in neoprene.

Go to your local DIY store and get a tube of white silicon sealant. With
the smallest nozzle size you should be able write on the neoprene. Should
be quite durable when dry - especially if you apply to an area which isn't
over-stretched.

Best wishes

Keith


If they are shock cord decks you can stitch onto the shock cord if you
are careful - remember to leave room for it to stretch - the other
option is sowing name tags on the deck release

Just a thought

Richard
--
Dr Richard Seaby

PISCES Conservation Ltd
IRC House, The Square
Pennington, Lymington
Hants, SO41 8GN
Tel +44 (0)1590 676622/674000 Fax +44 (0)1590 675599
www.irchouse.demon.co.uk www.pisces-conservation.com
www.powerstationeffects.co.uk www.amazonian-fish.co.uk

Marking Spraydecks
 

In article , Keith Meredith
wrote:
In article ,
Peter wrote:

Not a bad idea. Any experience of how long a transfer would last?
I am not sure about the idea of ironing the deck. Worth a try I guess.

Don't do it!

The transfers only really work on light coloured backgrounds

Tosh! Use white text or graphics...?

and the iron has to be on the hottest setting - way above the melting point
of the rubber in neoprene.

More tosh!

I used the technique commercially on neoprene-proofed nylon gear with no
problems. Printing on to the nylon covering of neoprene items should not be
a problem. There is negligible heat transfer through the layers, IME, and
there is no direct contact between the iron and garment.



Allan Bennett
Not a fan of silly cons.



--

Marking Spraydecks
 

Don't do it!

The transfers only really work on light coloured backgrounds

Tosh! Use white text or graphics...?

and the iron has to be on the hottest setting - way above the melting
point
of the rubber in neoprene.



Ok.... I am confused.... how do I print white?

P

--
Add "bypass" to subject line to email this address. All others rejected.