Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
MikeSoja
 
Posts: n/a
Default Mako vs Landshark saddles...


I already use Yakima's J-cradles, but want to carry a second boat
flat.

Does anyone like Yakima's Mako saddles better than the Landshark
ones, and how come?

And what about those Hullyrollers? Are they as easy on a boat's
finish as one of saddles would be?


I suppose I could go with another brand if they fit on round bars,
too.


Thanks in advance for all opinions.


Mike Soja

  #2   Report Post  
Blankibr
 
Posts: n/a
Default

INHO if you can find a set of the old TLC saddles, snatch them up.

The holy rollers work fine and don't mess your finish.

Brian
  #3   Report Post  
Dan O'Connell
 
Posts: n/a
Default

I have exactly that setup...and found that the Mako's will eat your gel coat
if you don't also purchase and instal their pads ($10 for 2) They marked up
my plastic Necky too..otherwise they are so flexible you don't have to
adjust much from boat to boat and loading from the rear is easier with my
SUV. The Yakima cradles are more difficult to load if your vehicle's
profile is very high...I have to almost climb on top to do it..but wish I
had two cradles if I had it to do over again...a plus for both is that they
are both fast to instal or take off if you want to lockem up while you're
gone.
Dan O
"MikeSoja" wrote in message
...

I already use Yakima's J-cradles, but want to carry a second boat
flat.

Does anyone like Yakima's Mako saddles better than the Landshark
ones, and how come?

And what about those Hullyrollers? Are they as easy on a boat's
finish as one of saddles would be?


I suppose I could go with another brand if they fit on round bars,
too.


Thanks in advance for all opinions.


Mike Soja



  #4   Report Post  
MikeSoja
 
Posts: n/a
Default

On Mon, 7 Feb 2005 19:28:33 -0800, Melissa
posted:

Hi Brian,


On 07 Feb 2005 22:18:45 GMT, you wrote:


INHO if you can find a set of the old TLC saddles, snatch them up.


I'll second that! I'm still using a set of TLC saddles that are about
12 years old now, and they're still great! At one point, I did try a
set of Makos, and they didn't get along well with my narrow, hard
chined boat.


Ah, well, you see, there I am. If I recall correctly, you have that
home built Arctic Hawk, and the boat I'm wanting to put in the
saddles is the Wilderness Sys Arctic Hawk. They are very similar
boats, no?

But I don't have the luxury of waiting around for a pair of TLCs to
show up. In fact, in my neck of the woods, I might be waiting a
long time.

Hmmmm.

Mike Soja

Someday I'll have to replace my trusty old TLCs, so I'm always on the
lookout for another used set somewhere! :-)


  #5   Report Post  
Dan O'Connell
 
Posts: n/a
Default

Putting more thought into my opinion on the Mako's...the damage done to your
boats will be done by abrasion on the hull from the flexibility of the
saddles while you are driving no matter how tight you strap it down...I am
clueless why Yakima didn't include the pads to prevent this...check out the
reviews at www.paddle.net I paddle with a woman who bought a brand new
Romany..and was shocked when I pointed out the white powder (gel coat) all
over her pads and roof.
Dan O
"MikeSoja" wrote in message
...

I already use Yakima's J-cradles, but want to carry a second boat
flat.

Does anyone like Yakima's Mako saddles better than the Landshark
ones, and how come?

And what about those Hullyrollers? Are they as easy on a boat's
finish as one of saddles would be?


I suppose I could go with another brand if they fit on round bars,
too.


Thanks in advance for all opinions.


Mike Soja





  #6   Report Post  
MikeSoja
 
Posts: n/a
Default

On Mon, 7 Feb 2005 23:05:15 -0800, Melissa
posted:

Hi Mike,


On Mon, 07 Feb 2005 22:58:06 -0500, you wrote:


Ah, well, you see, there I am. If I recall correctly, you have that
home built Arctic Hawk, and the boat I'm wanting to put in the
saddles is the Wilderness Sys Arctic Hawk. They are very similar
boats, no?


Yes...same basic dimensions, just different materials. In fact, both
my boats are hard chined (the other is a Current Designs Caribou).


But I don't have the luxury of waiting around for a pair of TLCs to
show up. In fact, in my neck of the woods, I might be waiting a
long time.


It's definitely a problem finding a used set of TLCs, because most of
us who have them are holding on to them! :-) At the time I returned
the Makos I'd purchased, I also wrote to Yakima, requesting that they
bring back the TLC model, but I guess my little letter wasn't
influential enough. :-(


Woo hoo. I just let eBay be my friend. There were two sets of four
TLCs and a TLC/Hullyroller combo (Buy it Now!) for sale, and instead
of fooling with the auction, I just bought the combo NOW. Bidding
is still going on (in the mid-$20) for the other sets if you're
interested.

http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW

Mike Soja

At this point, when I want to carry both boats on the car, the
Caribou goes in the TLCs, and I've re-shaped a pair of foam cradles
to accommodate the Arctic Hawk deck down on the rack. As long as I
tie it down securely, this arrangement works very well.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Mako Inflatables build CE approved quality RIB's in South Africa [email protected] Marketplace 0 March 8th 04 12:14 PM
FS: Mako Inflatables build CE approved quality RIB's in South Africa [email protected] Marketplace 0 February 18th 04 09:11 AM
ANNOUNCE: Mako Inflatables launch new X-Treme inflatable racer in South Africa [email protected] Marketplace 0 November 7th 03 03:16 PM
FS: Mako Inflatables build CE approved quality RIB's in South Africa [email protected] Marketplace 0 November 7th 03 03:15 PM
Yakima MAKO saddles for sale (2sets) chuck grose General 0 July 25th 03 08:44 PM


All times are GMT +1. The time now is 10:59 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017