Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Sun, 19 Sep 2004 08:29:43 -0400, John/Charleston
wrote: I'm slated to build a kayak rack for a local resort and while we've come up with a simple design that should be workable, I thought I'd ask for ideas from anyone who's already thought this out. The rack would need to store 30 or so boats of various styles. The current plan is just a simple 20' long x 8' deep stand of 4x4's with galvanized pipe crossbars to create bins. The pipes would be covered with short cuts of pvc piping to give a roller effect as the kayaks were being slid on/off the rack. I am a carpenter and I have the building sense needed to make this work well, I'm just looking for design tips that would be useful/fun to incorporate. Pics of existing systems would be great too! Many larger shops which sell them have various storage racks, usually made inhouse. Visit a few for ideas. REI shops have something I think is made centrally, probably closer to what you want. Most I have seen allow for side access to remove boats, not so much end access. However, they do need to keep the boats in "like new" condition. I would look at 3 racks, 5 boats high on each side. Do not plan on anything requiring a ladder to pull a boat, even if you do have the vertical space. 5 is as high as even tall people can do, and 4 might be better. Some shops suspend the boats using the grab loops at each end, or some sort of sling. If they also sell climbing gear, some of these setups are marvelously complex. You might also consider enough of a roof to shade them from UV or filling with rainwater. Happy trails, Gary (net.yogi.bear) ------------------------------------------------ at the 51st percentile of ursine intelligence Gary D. Schwartz, Needham, MA, USA Please reply to: garyDOTschwartzATpoboxDOTcom |
#2
![]() |
|||
|
|||
![]()
Thanks for the replies...The other day I was able to look over the
local county park's rack (they run kayak classes/tours too) and it's almost identical to what we'd designed. The boats will be stored on edge or possibly upside down so warping probably won't be a problem. Not only do I get paid well for this, but I get to take one of their used boats home too. woo woo! |
#3
![]() |
|||
|
|||
![]()
Morning, i have a similar project, could i see some photos of either design, thanks Adventuresark.com
Quote:
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General |