FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

This is a Martec Mark 2 Explorer Folding Prop for a 7/8" shaft. Is Right Hand
Screw, 12" Diameter, with 5 Pitch. Good condition, but complete restoration
available from manufacturer for an estimated $120.00. Price is a FIRM $95.00.
Will deliver in SF Bay Area vs. cash or cashier's check. May be inspected by
appointment at Ballena Isle Marina in Alameda. Contact: Jack at 925-376-4525.


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

let's see if I got this straight. *you* have a mashed up prop the manufacturer
is will to recondition for a mere $120, plus shipping both ways and handling
that *you* wonderful person that you are are willing to let go for a measely
$95 when anyone on the planet can buy said prop brand new for about $300, plus
shipping one way?

What a prince of a human being you are.

btw, *most* people who need a right hand 12" prop for a 7/8" shaft have Atomic
4 engine, AND virtually ALL of them want a 6" pitch, not a 5" pitch.

A lot of friends you have in this life, dontcha? should we start calling you
collect?

This is a Martec Mark 2 Explorer Folding Prop for a 7/8" shaft. Is Right
Hand
Screw, 12" Diameter, with 5 Pitch. Good condition, but complete restoration
available from manufacturer for an estimated $120.00. Price is a FIRM
$95.00.
Will deliver in SF Bay Area vs. cash or cashier's check. May be inspected by
appointment at Ballena Isle Marina in Alameda. Contact: Jack at
925-376-4525.


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm










----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

$95 when anyone on the planet can buy said prop brand new for about $300, plus
shipping one way?


Martec prop is not 300.00 new, Jax. More like 7-800 bucks I think.

RB


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

Martec prop is not 300.00 new, Jax. More like 7-800 bucks I think.


I haven't checked recently, but recall catalog prices on a two blade, folding
Martec 12" well under $400. Feathering props are another story.


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

I haven't checked recently, but recall catalog prices on a two blade, folding
Martec 12" well under $400. Feathering props are another story.

12" Folding prop is 775.00 retail, I believe. Discount price is still around
650.00. My prop on the C&C 32 was 1200 and change some time ago.
He also says the prop is in good condition, but a buyer has the option for the
rebuild. He says buyers can come check out the prop as well. He'd do way better
by putting it on ebay.
Either way, it's a reasonable deal by far, Jax.

RB





----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

Price has gone up from last time I checked. Current list price, $575.
available from Defender for $536.

http://www.defender.com/cgi-bin/Web_...ords=martec&fr
ames=yes&store=yes

Usual price for used is about $75 to $150. I was bothered, maybe still am, by
suggestion the prop may need factory reconditioning. I have never seen one
that could use reconditioning at all unless it had hit something. Maybe seller
was just being unusually helpful.

If the prop is is good condition it is worth its asking price. If it requires
factory reconditioning, perhaps consideration of a brand new prop is in order.




----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

Jax:

I guess I erred on the side of giving too much information. It's just that I
pulled up Martec's website and found
a whole menu of things that they will do:
1. "Clean, rebalance and polish:$60.00" It has been thoroughly cleaned and
polished but I have no idea what would require "rebalancing". Is it like a car
wheel ?

2: "Redrill pivot holes in blades and hub: $40.00" Guess that would only be
necessary if they did #1.

3: "Oversize monel pivot pin:$12.00" Guess that would follow after drilling.

Then they list such hardware items as Monel cotter pins, shaft key, shaft nut.

Totalling all those items I came up with the $125.00 estimate. I would not do
any of it myself, except for buying new cotter pins and shaft key, but it
occurred to me that some purist might want everything perfect so provided the
info.

Guess I should have "KISS" (Keep it simple, stupid!)!

Anyway, I can assure any would be buyer that the prop is in "GOOD CONDITION"
and available for inspection.

Jackson


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

Anyway, I can assure any would be buyer that the prop is in "GOOD CONDITION"
and available for inspection.

Good deal on that prop. If you list it on Ebay you'll get much more than 100
bucks. Take a good pic.

RB


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

Anyway, I can assure any would be buyer that the prop is in "GOOD CONDITION"
and available for inspection.

then it is well worth your asking price.


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

FS: IN SF BAY AREA-MARTEC FOLDING SAIL PROPELLER
 

I now have some nice pics of the prop--available via e-mail-- for anyone who is
interested.

Jackson


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm