Used 1996 seadoo speedster twins 180hp
 

What are the gotcha's with this type of boat?

Thinking about buying this '96 bombardier jetboat, twin rotax engines,
guy wants $6450, boat looks nice.

There no traditional transome issues, what do I need to watch out for
with this kind of boat? Compressions test?

Used 1996 seadoo speedster twins 180hp
 

"P" wrote in message
...
What are the gotcha's with this type of boat?

Thinking about buying this '96 bombardier jetboat, twin rotax engines,
guy wants $6450, boat looks nice.

There no traditional transome issues, what do I need to watch out for
with this kind of boat? Compressions test?

I'd have a trustworthy mechanic look at the engines.
My nephew bought one and the engines failed right away. Seems someone
didn't mix oil with the gas. It was a fight but the $1800.00 repair bill
was covered by the selling dealer. (brother-in-law knew him and had bought a
number of new vehicles from him)

Used 1996 seadoo speedster twins 180hp
 

Don White wrote:
"P" wrote in message
...
What are the gotcha's with this type of boat?

Thinking about buying this '96 bombardier jetboat, twin rotax engines,
guy wants $6450, boat looks nice.

There no traditional transome issues, what do I need to watch out for
with this kind of boat? Compressions test?

I'd have a trustworthy mechanic look at the engines.
My nephew bought one and the engines failed right away. Seems someone
didn't mix oil with the gas. It was a fight but the $1800.00 repair bill
was covered by the selling dealer. (brother-in-law knew him and had bought a
number of new vehicles from him)





The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Used 1996 seadoo speedster twins 180hp
 

What are the gotcha's with this type of boat?

IMO...they're useless, unless you're tubing every trip.

Used 1996 seadoo speedster twins 180hp
 

"P" wrote in message
...
What are the gotcha's with this type of boat?

Thinking about buying this '96 bombardier jetboat, twin rotax engines,
guy wants $6450, boat looks nice.

There no traditional transome issues, what do I need to watch out for
with this kind of boat? Compressions test?

The use gas like it's water. And they are generally ragged out when they
are that old.

Used 1996 seadoo speedster twins 180hp
 

On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:

Don White wrote:
"P" wrote in message
...


The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady

Used 1996 seadoo speedster twins 180hp
 

Richard Casady wrote:
On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:

Don White wrote:
"P" wrote in message
...

The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady


We're talking jetski boats here. They don't live too long.

Used 1996 seadoo speedster twins 180hp
 

On Aug 18, 8:36*am, (Richard Casady)
wrote:
On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:
Don White wrote:
"P" wrote in message
....

The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady

Your go fast jetboat has about as much in common with this sea dodo as
my runabout does.

Used 1996 seadoo speedster twins 180hp
 

On Mon, 18 Aug 2008 08:09:58 -0700 (PDT), wrote:

On Aug 18, 8:36*am, (Richard Casady)
wrote:
On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:
Don White wrote:
"P" wrote in message
...

The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady

Your go fast jetboat has about as much in common with this sea dodo as
my runabout does.
You flatter it with go fast. 35 or so. It started with a Graymarine
flathead inline six and turned 3300 RPM. We marinized a Buick V-6 and
got 3700 RPM. Early jet drives were inefficient. A slow 16 ft
runabout. Fast enough for a five by four lake [Spirit Lake in Iowa].
Pulls waterskiers just fine. Ours is SN#10. A 58 I think. Three like
it were the first boats to go up a long stretch of the Colorado River.

Casady

Casady

Casady

Used 1996 seadoo speedster twins 180hp
 

On Aug 18, 1:08*pm, (Richard Casady)
wrote:
On Mon, 18 Aug 2008 08:09:58 -0700 (PDT), wrote:
On Aug 18, 8:36*am, (Richard Casady)
wrote:
On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:
Don White wrote:
"P" wrote in message
...

The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady

Your go fast jetboat has about as much in common with this sea dodo as
my runabout does.

*You flatter it with go fast. 35 or so. It started with a Graymarine
flathead inline six and turned 3300 RPM. We marinized a Buick V-6 and
got 3700 RPM. Early jet drives were inefficient. A slow 16 ft
runabout. Fast enough for a five by four lake [Spirit Lake in Iowa].
Pulls waterskiers just fine. Ours is SN#10. A 58 I think. Three like
it were the first boats to go up a long stretch of the Colorado River.

Casady

Casady

Casady- Hide quoted text -

- Show quoted text -

If you're only able to 3,700 rpm then you have to little engine on too
big a jet drive. Why don't you try a small block.

Used 1996 seadoo speedster twins 180hp
 

"P" wrote in message
...
What are the gotcha's with this type of boat?

Thinking about buying this '96 bombardier jetboat, twin rotax engines,
guy wants $6450, boat looks nice.

There no traditional transome issues, what do I need to watch out for
with this kind of boat? Compressions test?

See how much of a home equity loan you can get. You will need it for the
fuel bill. Rotax's are gas hogs and twins are really bad from what I hear.

Used 1996 seadoo speedster twins 180hp
 

On Mon, 18 Aug 2008 10:25:42 -0700 (PDT), wrote:

On Aug 18, 1:08*pm, (Richard Casady)
wrote:
On Mon, 18 Aug 2008 08:09:58 -0700 (PDT), wrote:
On Aug 18, 8:36*am, (Richard Casady)
wrote:
On Sun, 17 Aug 2008 18:28:12 -0400, hk wrote:
Don White wrote:
"P" wrote in message
...

The best advice: it's a 10-year-old jetboat. Walk away from it as fast
as possible. It's worthless.

Of course. I plan to hang on to my fifty year old jetboat. A
turbocraft with a Buick engine.

Casady

Your go fast jetboat has about as much in common with this sea dodo as
my runabout does.

*You flatter it with go fast. 35 or so. It started with a Graymarine
flathead inline six and turned 3300 RPM. We marinized a Buick V-6 and
got 3700 RPM. Early jet drives were inefficient. A slow 16 ft
runabout. Fast enough for a five by four lake [Spirit Lake in Iowa].
Pulls waterskiers just fine. Ours is SN#10. A 58 I think. Three like
it were the first boats to go up a long stretch of the Colorado River.

Casady

Casady

Casady- Hide quoted text -

- Show quoted text -

If you're only able to 3,700 rpm then you have to little engine on too
big a jet drive. Why don't you try a small block.

It is true enough that the pump is too big for the engine. However,
even as it is, nothing on the lake is as much as ten minutes away.
It is a license built copy of a Hamilton [New Zealand]. I think it is
a version of Hamilton's smallest pump.

Casady

Used 1996 seadoo speedster twins 180hp
 

'96 bombardier jetboat, twin rotax engines,guy wants $6450, boat
looks nice. There no traditional transom issues, what do I need to
watch out for
with this kind of boat?

The problems are;

- gas hog
- old, perhaps had the crap beaten out of it
- potential motor problems
- seemly Richard has an unusual boat

#1 gas hog - this just sounds like a sure thing, not much to check. I
like the two engine thing though - I'd be using on Lake Ontario (calm
days only) & it would be nice to be able to get home if one quit.

#2 old, perhaps ragged. How can I tell? I plan to take it to a
mechanic & have him do a engine & water test - would they be able to
tell? Anything specific to ask the mechanic other then "is it toast"?

#3 potential motor problems - again - would the mechanic be able to
tell?

Its seems the main issues here are with the motor(s). Since the boat
itself is all fibreglass (is it??)