About Us

HK

wrote:
On Aug 17, 2:25 pm, hk wrote:
Vic Smith wrote:
On Sun, 17 Aug 2008 10:29:09 -0700 (PDT),
wrote:
Yesterday, i was at St. Andrews State PArk near Panama City, FL siting
on the jetty watching boats going in and out between the jetties. The
tide was going out with s little wind opposing it so there was a good
chop in the channel. It was a great venue for watching how boats are
handled in chop.
About 1/4 of the boats were clearly going too fast for conditions and
eventually they would pound too hard and slow down. About 1/4 were
going too slow and were wallowing in the deep chop. What did amaze me
was the number of small boats with transoms cut away so much that if
they slowed down their own wake would swamp them. These boats had
transom tops only inches from the water and seemed to have no business
in such chop.
My Tolman is the first power boat I have ever driven so I have no
other basis for comparison. What degree of pounding is acceptable?
You still thinking about doing a Bahamas trip with the Tolman?
From your previous posts, I'm guessing the Tolman has been only
in the river. Are you thinking about taking it to some chop to get a
feel on its handling?
I've given some thought to how I would test what is "safe water" if I
get a Carolina Skiff, especially since my boat handing experience is
limited. I've got a feeling that it will happen naturally, since I
really don't want to go looking for trouble. More that I don't want a
10 grand motor dunked in salt water than anything else.
But if you've been motoring the Tolman only in calm waters and plan to
take it to the Bahamas, maybe a little "testing" is in order.
--Vic
Indeed, he ought to get some experience on the mighty waters of Lake
Lanier.- Hide quoted text -

- Show quoted text -

See, when you make a comment like "even a sheathed boat..." it let's
us know you don't understand wood/glass composite. In that type of
construction for one, the glass is to protect the wood, not
necessarily to provide more structural integerity. That is provided by
the laminates (plywood) and the framing used to secure it, bent
panels, etc.. not the sheathing. In onother words, when it comes to
this type of construction, you are out of your league...

Let's see some photos of the larger, heavier duty stitch-and-glue boats
you've built that regularly zip through really choppy, windy inlets at,
say, 20 knots.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Day watching boats and planes.	Calif Bill	General	2	October 8th 07 11:01 PM
I'm watching...	Butch Davis	General	4	August 27th 06 07:01 AM
I'm watching...	DSK	General	5	August 26th 06 03:05 PM
Don't ask questions on boats - the Feds are watching!	[email protected]	General	14	April 22nd 05 04:10 AM
Don't ask questions on boats - the Feds are watching!	[email protected]	General	9	April 22nd 05 04:10 AM

Menu

About Us