About Yanmar diesels
 

Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines ....
(was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at 2800
to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may have
screwed up the pitch on the props. Adding a couple of inches to the pitch
would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a steal
at that price, given the recent upgrades.


Eisboch

About Yanmar diesels
 

"Eisboch" wrote in message
...
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines ....
(was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at
2800 to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may have
screwed up the pitch on the props. Adding a couple of inches to the pitch
would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a
steal at that price, given the recent upgrades.


Eisboch


I know, I know ..... "were" instead of "where". Too early.

About Yanmar diesels
 

"Eisboch" wrote in message
...

"Eisboch" wrote in message
...
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines
.... (was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at
2800 to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may
have screwed up the pitch on the props. Adding a couple of inches to the
pitch would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a
steal at that price, given the recent upgrades.


Eisboch


I know, I know ..... "were" instead of "where". Too early.


So...who slipped in and stole that boat from under you....Capt SW??

About Yanmar diesels
 

Don White wrote:
"Eisboch" wrote in message
...
"Eisboch" wrote in message
...
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines
.... (was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at
2800 to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may
have screwed up the pitch on the props. Adding a couple of inches to the
pitch would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a
steal at that price, given the recent upgrades.


Eisboch

I know, I know ..... "were" instead of "where". Too early.


So...who slipped in and stole that boat from under you....Capt SW??




SW is only interested in etec powered bloats, er, boats.

About Yanmar diesels
 

On Mar 19, 10:42*am, HK wrote:
Don White wrote:
"Eisboch" wrote in message
m...
"Eisboch" wrote in message
om...
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines
.... (was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation..

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. * The 1999 vintage Volvo's *I had where rated at
2800 to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may
have screwed up the pitch on the props. *Adding a couple of inches to the
pitch would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. * It was a
steal at that price, given the recent upgrades.

Eisboch

I know, I know ..... "were" *instead of "where". * *Too early.

So...who slipped in and stole that boat from under you....Capt SW??

SW is only interested in etec powered bloats, er, boats.- Hide quoted text -

- Show quoted text -

As usual. If you don't have it, insult it. What a low life.

About Yanmar diesels
 

On Mar 19, 7:12*am, "Eisboch" wrote:
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines ....
(was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. * The 1999 vintage Volvo's *I had where rated at 2800
to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may have
screwed up the pitch on the props. *Adding a couple of inches to the pitch
would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. * It was a steal
at that price, given the recent upgrades.

Eisboch

I would leave the pitch right where it is. Our local Yanmar dealer
under pitches all the boats he repowers, they were not flexable at all
about doing this. When their that insistant, their's probably a
reason, like reduced life. Myself, I'd rather have Cats or Cummins. I
just see too many boats powered with Yanmars that smoke, with very low
hours. And owners suddenly getting rid of the boats (this was before
the bottom fell out of prices). Makes me more than a little worried
about them. The high RPM's are because those are short stroke engines.
You just can't get the piston moving as fast on a long stroke engine,
resulting in lower RPM's.

About Yanmar diesels
 

"Capt John" wrote in message
...
On Mar 19, 7:12 am, "Eisboch" wrote:
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines ....
(was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at 2800
to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may have
screwed up the pitch on the props. Adding a couple of inches to the pitch
would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a steal
at that price, given the recent upgrades.

Eisboch

I would leave the pitch right where it is. Our local Yanmar dealer
under pitches all the boats he repowers, they were not flexable at all
about doing this. When their that insistant, their's probably a
reason, like reduced life. Myself, I'd rather have Cats or Cummins. I
just see too many boats powered with Yanmars that smoke, with very low
hours. And owners suddenly getting rid of the boats (this was before
the bottom fell out of prices). Makes me more than a little worried
about them. The high RPM's are because those are short stroke engines.
You just can't get the piston moving as fast on a long stroke engine,
resulting in lower RPM's.

---------------------------------------------


Well, that makes me feel a little better about losing this potential buy.
Hope Tom doesn't have any serious problems! :-)

Eisboch

About Yanmar diesels
 

On Wed, 19 Mar 2008 12:23:21 -0400, "Eisboch" wrote:


"Capt John" wrote in message
...
On Mar 19, 7:12 am, "Eisboch" wrote:
Recently, I expressed interest in a 36' Hatteras that had been repowered
with Yanmar diesels.

I had some reservations after hearing that they were high RPM engines ....
(was told they ran at 3600 RPM at WOT) .... and I felt a little
uncomfortable with that, even though the engines had a good reputation.

I checked the engine specs on the Yanmar website and discovered that they
are actually rated for 3300 RPM at WOT.
That's still high as diesels go, but not that uncommon for a modern turbo
diesel built in 2006. The 1999 vintage Volvo's I had where rated at 2800
to 3000 RPM, depending on application.

I suspect that since this particular Hatteras was repowered, they may have
screwed up the pitch on the props. Adding a couple of inches to the pitch
would probably bring it within specs.

Doesn't matter though .... someone else jumped on the boat. It was a steal
at that price, given the recent upgrades.

Eisboch

I would leave the pitch right where it is. Our local Yanmar dealer
under pitches all the boats he repowers, they were not flexable at all
about doing this. When their that insistant, their's probably a
reason, like reduced life. Myself, I'd rather have Cats or Cummins. I
just see too many boats powered with Yanmars that smoke, with very low
hours. And owners suddenly getting rid of the boats (this was before
the bottom fell out of prices). Makes me more than a little worried
about them. The high RPM's are because those are short stroke engines.
You just can't get the piston moving as fast on a long stroke engine,
resulting in lower RPM's.

---------------------------------------------

Well, that makes me feel a little better about losing this potential buy.
Hope Tom doesn't have any serious problems! :-)

No worries.

I'll be switching to ETECs next week. :)

About Yanmar diesels
 

On Wed, 19 Mar 2008 18:40:29 GMT, Short Wave Sportfishing
wrote:

I'll be switching to ETECs next week. :)

Are those the engines that actually create extra fuel as they run ?

:-)

About Yanmar diesels
 

On Wed, 19 Mar 2008 19:56:42 -0400, Wayne.B
wrote:

On Wed, 19 Mar 2008 18:40:29 GMT, Short Wave Sportfishing
wrote:

I'll be switching to ETECs next week. :)

Are those the engines that actually create extra fuel as they run ?

:-)

Why yes - yes they do.

How do you think they are so economical? :)

It's pretty amazing - Jimmy Newtron, Boy Genius modified them for me.