Bruce in Bangkok wrote:
On Sat, 24 Nov 2007 23:49:00 -0500, Wayne.B
wrote:

On Sat, 24 Nov 2007 22:12:41 -0600, Brian Whatcott
wrote:

Diesels don't have this problem, and so are less wasteful at low
revs.
That's true but they have maintenance issues if run at low speed/low
load for extended periods of time.

Yes there "seems" to be that but mention of "it is bad to run the
engine at low poser" seems confined to the boating world. I've worked
many construction jobs where diesel engines were started in the
morning and shut down at the end of the day. During smoke breaks or
lunch they just sat there and idled. Cranes are a perfect example,
that spend most of their life at very low power settings.

Generator sets - I've never seen a gen set operating manual that said
"run this engine at high power settings".

Not that I'm advocating idling your diesel for days and days but I do
wonder about the people who worry about letting the engine idle. I've
seen people that would hardly let the poor old thing cool down before
stop-cocking it, "because it is bad to let the engine run at low
load".

The Perkins I have in the sail boat has a continuous rating of 3,000
RPM and for years I ran it at 1500 - 1800. When I overhauled it I
could see no evidence of abnormal wear or carbon or any other evidence
that slow running harmed anything.

I have the feeling that someone once said "it's not a good idea to
idle a diesel for a long time" and as the message passed from dockie
to dockie it became an urban legend and now everyone is worried about
idling the engine.

The issue with my motor, the Yanmar 2QM15, is that it runs cold at low
RPM. I can verify this. It's amazing how long it stays cold with no
load. This would be bad for it, right?

Stephen