![]() |
Help! Power steering pump problem!
The power steering pump on my 4.3L sterndrive is leaking like crazy.
It seems to be coming from the stainless steel line that attaches near the bottom with a brass nut. The nut is tight but still leaks. Is there a way to seal this? I don't want to replace the entire line. Thanks! |
Help! Power steering pump problem!
"Inno" wrote in message ups.com... The power steering pump on my 4.3L sterndrive is leaking like crazy. It seems to be coming from the stainless steel line that attaches near the bottom with a brass nut. The nut is tight but still leaks. Is there a way to seal this? I don't want to replace the entire line. Thanks! No. Sorry. -- Posted via a free Usenet account from http://www.teranews.com |
Help! Power steering pump problem!
That hose is the pressure supply side. Some of them are flared connections
and some are o-rings. Overtightening can make it worse. You need to remove it to see which you have. If it is flared you also want to take a look at the seat down in the hole on the pump to make sure it is not damaged before you replace the hose. If it is an o-ring you may simply be able to replace the o-ring. Lowes may have one close enough in the plumbing department. Otherwise you'll have to give the boat store 10 times $ what it is actually worth :-) You need to make completely sure it is coming from the hose and not the front seal. The front seal is a common leak point on power steering pumps. "Inno" wrote in message ups.com... The power steering pump on my 4.3L sterndrive is leaking like crazy. It seems to be coming from the stainless steel line that attaches near the bottom with a brass nut. The nut is tight but still leaks. Is there a way to seal this? I don't want to replace the entire line. Thanks! |
All times are GMT +1. The time now is 03:07 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com