![]() |
merc 70's 9.8 lower unit
hi, i have bought a old red band 70's model merc 9.8 and want to cange
the gear oil. i find and remove the drain plug but can't find the vent/fill plug. can anyone help as i am new to this? thanks |
merc 70's 9.8 lower unit
andy wrote: hi, i have bought a old red band 70's model merc 9.8 and want to cange the gear oil. i find and remove the drain plug but can't find the vent/fill plug. can anyone help as i am new to this? thanks It should be on the starboard side just above the cavitation plate about 5 inches back from the leading edge. On earlier models the vent plug is sometimes smaller than the drain. I noticed you called it vent/ fill. You don't ever want to fill the gearcase through the top plug, this will trap air in the bottom of the housing and cause a lack of lubrication. This can terminally damage your gearcase. Always fill from the bottom plug till it comes out the top. You can use a pointed cap on your gearlube bottle and squeeze it in or most marinas sell pumps that screw into the bottom hole. |
All times are GMT +1. The time now is 12:30 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com