I took the day off and spent most of it on the boat with my wife and some
friends. We decided to do some swimming so we anchored at our favorite
swimming hole.

While in the water I noticed that the paint is starting to let go along the
edges of my outdrive. The outdrive has magnesium anodes in all the
correct places but there is no tab anode on the back end of the cavitation
plate.

This is the first time this boat has ever spent life in the water at a
marina........it was always a trailered boat in the past and the outdrive
was in pristine condition cosmetically when I purchased the boat last
summer.

Shore power is available at my dock but I do not use it other then when
working on the boat. The boat does not have a galvanic isolator.

I am planning on adding the tab anode on back end of the outdrive cavitation
plate. I am also considering adding a galvanic isolator to the boats DC
electrical system.

Is this a good decision or am acting prematurely before doing other trouble
shooting (and what would that trouble shooting include?)

If the galvanic isolator is a good add on ($150 on a Guest 50 amp on Ebay),
what amp size should I consider? 30? 50?

TIA for your help!

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no benefit
to me?

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no benefit
to me?


Decide for yourself:

http://www.newmarpower.com/pdf/Manual-GI-30&50.pdf#search='galvanic%20isolator%20boat'

www.yandina.com/acrobats/GalvOwnManual.pdf

http://www.usps.org/pipermail/psml/2...st/004944.html

http://webconsult.web.aplus.net/boat...isolators.html


Eisboch

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no
benefit to me?


Decide for yourself:

http://www.newmarpower.com/pdf/Manual-GI-30&50.pdf#search='galvanic%20isolator%20boat'

www.yandina.com/acrobats/GalvOwnManual.pdf

http://www.usps.org/pipermail/psml/2...st/004944.html

http://webconsult.web.aplus.net/boat...isolators.html


Eisboch




Thank you for the links Richard. It looks like I have some additional
reading to do.

I am not an electrical expert and offered my original questions based on
what Dave Pascoe had offered at his site.

Can anyone cut to the chase on this for me or do I have more homework in my
future? ;-)

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no
benefit to me?


Decide for yourself:

http://www.newmarpower.com/pdf/Manual-GI-30&50.pdf#search='galvanic%20isolator%20boat'

www.yandina.com/acrobats/GalvOwnManual.pdf

http://www.usps.org/pipermail/psml/2...st/004944.html

http://webconsult.web.aplus.net/boat...isolators.html


Eisboch




I found the answer and acted prematurely on this without doing all the
necessary research. Based on my situation a galvanic isolator serves no
useful purpose. I will look further into additional anode protection.

Thanks for your input Richard.

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
. ..

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a galvanic
isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no
benefit to me?


Decide for yourself:

http://www.newmarpower.com/pdf/Manual-GI-30&50.pdf#search='galvanic%20isolator%20boat'

www.yandina.com/acrobats/GalvOwnManual.pdf

http://www.usps.org/pipermail/psml/2...st/004944.html

http://webconsult.web.aplus.net/boat...isolators.html


Eisboch




Thank you for the links Richard. It looks like I have some additional
reading to do.

I am not an electrical expert and offered my original questions based on
what Dave Pascoe had offered at his site.

Can anyone cut to the chase on this for me or do I have more homework in
my future? ;-)


This stuff can be straightforward and it can also be as mysterious as the
meaning of life.
Obviously, your tab anode is eroding ..... unless the nut was loose and it
fell off.

My understanding (having chased this problem for a year on my Navigator
before finding the problem) is that if your boat is totally isolated from
the shore power's bonding (ground) system, a galvanic isolator won't help
you.
Not being hooked up to shore power should mean you are isolated.

Even with the best of precautions, the anodes will erode. That's what they
are supposed to do. In my experience, it is not uncommon to replace all the
sacrificial anodes once or twice during the course of a season, if hooked to
shore power and in a slip.

The best investment I made, at the suggestion of some seasoned slip
inhabitors, was to buy one of those zinc fish anodes with the stainless
cable and clip attached. I clip it to the boat's bonding system and adjust
the cable so the fish is about a foot above the bottom at low tide. This
significantly reduced the other anode erosion.

Why your tab anode (only) is prematurely eroding is one of the mysteries of
life to me.

Eisboch

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
. ..

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

"Eisboch" wrote in message
...

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...

If you are not regularly connected to shore power, what will a
galvanic isolator do for you?


Eisboch



I don't know. Thus my original question.

If I am not connected to shore power a galvanic isolator offers no
benefit to me?


Decide for yourself:

http://www.newmarpower.com/pdf/Manual-GI-30&50.pdf#search='galvanic%20isolator%20boat'

www.yandina.com/acrobats/GalvOwnManual.pdf

http://www.usps.org/pipermail/psml/2...st/004944.html

http://webconsult.web.aplus.net/boat...isolators.html


Eisboch




Thank you for the links Richard. It looks like I have some additional
reading to do.

I am not an electrical expert and offered my original questions based on
what Dave Pascoe had offered at his site.

Can anyone cut to the chase on this for me or do I have more homework in
my future? ;-)


This stuff can be straightforward and it can also be as mysterious as the
meaning of life.
Obviously, your tab anode is eroding ..... unless the nut was loose and it
fell off.

My understanding (having chased this problem for a year on my Navigator
before finding the problem) is that if your boat is totally isolated from
the shore power's bonding (ground) system, a galvanic isolator won't help
you.
Not being hooked up to shore power should mean you are isolated.

Even with the best of precautions, the anodes will erode. That's what they
are supposed to do. In my experience, it is not uncommon to replace all
the sacrificial anodes once or twice during the course of a season, if
hooked to shore power and in a slip.

The best investment I made, at the suggestion of some seasoned slip
inhabitors, was to buy one of those zinc fish anodes with the stainless
cable and clip attached. I clip it to the boat's bonding system and
adjust the cable so the fish is about a foot above the bottom at low tide.
This significantly reduced the other anode erosion.

Why your tab anode (only) is prematurely eroding is one of the mysteries
of life to me.

Eisboch



Thanks for the quick response Richard.

The OD does not have a tab anode and the other anodes (2) are not showing
signs of corrosion.

What concerns me is the fact that I am losing paint along the leading edges
of my outdrive when I did not see that before. I had previously read that
such an occurrence is a sign of corrosion due to electrical problems/

I will be adding a magnesium tab on the outdrive and take up your suggestion
of the submerged magnesium fish connected to my grounding system. A friend
of mine who had an aluminum hull boat (Marinette) used to dunk one of those
anodes whenever he got into the dock.

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...


I will be adding a magnesium tab on the outdrive and take up your
suggestion of the submerged magnesium fish connected to my grounding
system. A friend of mine who had an aluminum hull boat (Marinette) used
to dunk one of those anodes whenever he got into the dock.


Are you in salt water or fresh?

Seems to me that there are different anode materials for each.

Also ... this may help explain some of the mystery ... pertains to salt
water ..

http://www.boatus.com/boattech/casey/23.htm


Eisboch

"Eisboch" wrote in message
news

" JimH" jimhUNDERSCOREosudad@yahooDOTcom wrote in message
...


I will be adding a magnesium tab on the outdrive and take up your
suggestion of the submerged magnesium fish connected to my grounding
system. A friend of mine who had an aluminum hull boat (Marinette) used
to dunk one of those anodes whenever he got into the dock.


Are you in salt water or fresh?

Seems to me that there are different anode materials for each.

Also ... this may help explain some of the mystery ... pertains to salt
water ..

http://www.boatus.com/boattech/casey/23.htm


Eisboch


I am in fresh water. I *assume* the anodes are magnesium, but they are most
likely original (since the boat lived it's previous life on a trailer or in
inland lakes) so who knows.

I am pulling the boat next week to do some work on it and will most likely
replace the anodes with magnesium anodes, plus adding a magnesium tab on the
cavitation plate.

Thanks again for all your help on this Richard.

BTW: I was obviously out of line with you in the recent past. You continue
to show yourself to be a class act and key contributor here. Thanks for
looking past that big mistake of mine and moving forward. You are a good
man and my observations were most obviously off base.

Can I safely say "I apologize to you" for making yet another mistake in this
NG?