Calling Bill Grannis ??
 

Hi! A stray and accursed mungrel has found its way to the Mercury Clamshack
(tm). To wit a Johnson 48 Special. :))

Model # J48ESLERD
Serial # G 03521513

You know what year this critter is (so's I can order an impeller) ???

Also any unusual tips or tricks to remove/replace lower unit for waterpump
change??

Thanks!

-W

Calling Bill Grannis ??
 

Clams Canino wrote:

Hi! A stray and accursed mungrel has found its way to the Mercury Clamshack
(tm). To wit a Johnson 48 Special. :))

Model # J48ESLERD
Serial # G 03521513

1994


You know what year this critter is (so's I can order an impeller) ???

OMC# 432941
Sierra/NAPA # 18-3104


Also any unusual tips or tricks to remove/replace lower unit for waterpump
change??

Use Sierra/NAPA # 18-3394 kit(includes impeller) to get all small parts
you will need.

Put shifter in forward.

Don't forget the hidden bolt under the trim tab.

Use care in aligning water tube into pump body.

Lube splines before reassembly, renew o-ring.

Rob

Thanks!

-W

Calling Bill Grannis ??
 

"Clams Canino" wrote in message
nk.net...


Model # J48ESLERD
Serial # G 03521513

You know what year this critter is (so's I can order an impeller) ???

Also any unusual tips or tricks to remove/replace lower unit for waterpump
change??


Hi Clams,

You have a 1994 48 Special

water pump kit #438592, includes the housing and is recommended for this 12
year old motor.
impeller only #432941

Get a service manual to become familiar with the procedure and to know how
to check the shift rod height adjustment before installing the gearcase.

Good luck

Bill Grannis
service manager

Calling Bill Grannis ??
 

Good!

What HP??

-W

"Shortwave Sportfishing" wrote in message Gotta
question for you. That 75 blue band Merc I have - I don't have
time to rebuild it - know anybody who needs parts?

Calling Bill Grannis ??
 

I did one on an 88 special... so if the procedure is about the same... I can
wing it.

Thanks!

-W

"Billgran" wrote in message
. ..

"Clams Canino" wrote in message
nk.net...


Model # J48ESLERD
Serial # G 03521513

You know what year this critter is (so's I can order an impeller) ???

Also any unusual tips or tricks to remove/replace lower unit for
waterpump
change??


Hi Clams,

You have a 1994 48 Special

water pump kit #438592, includes the housing and is recommended for this
12
year old motor.
impeller only #432941

Get a service manual to become familiar with the procedure and to know how
to check the shift rod height adjustment before installing the gearcase.

Good luck

Bill Grannis
service manager

Calling Bill Grannis ??
 

You tryin' to sell it... or give it to me??? :))

-W

"Shortwave Sportfishing" wrote in message
...
On Mon, 26 Jun 2006 03:10:56 GMT, "Clams Canino"
wrote:

Good!

What HP??

-W

"Shortwave Sportfishing" wrote in message Gotta
question for you. That 75 blue band Merc I have - I don't have
time to rebuild it - know anybody who needs parts?


75 - i need to get it out of my garage. Wish I had time to work on
it.

I figured as a parts motor it might attract some attention. Any
hints?

Calling Bill Grannis ??
 

"Billgran" wrote in message news:MzEng.35039

water pump kit #438592, includes the housing and is recommended for this
12
year old motor.

Pro-Marine kit 3211 now that I have something to cross it to - thanks
again!!

-W

Calling Bill Grannis ??
 

To or from CA? I'm in SC - where are you?

-W

"Shortwave Sportfishing" wrote in message
...
On Mon, 26 Jun 2006 12:57:15 GMT, "Clams Canino"
wrote:

You tryin' to sell it... or give it to me??? :))

If you want it and can ship it to CA, be my guest.

Calling Bill Grannis ??
 

Seriously.... yes. I can find it a good home in total or in parts. I'm
sure of that.

-W

"Shortwave Sportfishing" wrote in message
...
On Mon, 26 Jun 2006 22:42:15 GMT, "Clams Canino"
wrote:

To or from CA? I'm in SC - where are you?

Hmmmm - I don't know why I thought you were in CA.

I'm heading down to SC in July - want me to bring it to you?

Calling Bill Grannis ??
 

On Tue, 27 Jun 2006 03:22:57 GMT, "Clams Canino"
wrote:


Hey Clams,

I have a friend who has an old Tower of Power Merc that needs a wiring
harness. What options does he have to repair/replace?

If there's any hope I'll get the exact info from him.