2 stroke Mercury 50 knocking
 

Hi
I have a 6 year old merc 50 that starts to knock every so often,
possibly as if it's firing on only 2 cylinders. Anyone know of any
common faults to look at first ? I'm thinking possibly one of the coils
maybe or are stators a problem with this engine. Also it only seems to
happen at mid range so maybe a carb issue ? Anyway I'm open to
suggestions.

2 stroke Mercury 50 knocking
 

I take it, your talking abotu a spark "ping" or "knock" .

does it run good at wide open throttle? and does it idle well? I'm
sure you're running fresh gas in it. Old fuel will cause spark knock,
but will usually run crappy regardless of RPM, that is, if you can get
it started. You might also consider having the spark timing checked to
see if it hasn't slipped.


I don't think you have a stator problem, that is, unless the battery is
draining and isn't being charged.



nig.xl wrote:
Hi
I have a 6 year old merc 50 that starts to knock every so often,
possibly as if it's firing on only 2 cylinders. Anyone know of any
common faults to look at first ? I'm thinking possibly one of the coils
maybe or are stators a problem with this engine. Also it only seems to
happen at mid range so maybe a carb issue ? Anyway I'm open to
suggestions.

2 stroke Mercury 50 knocking
 

wrote:

I take it, your talking abotu a spark "ping" or "knock" .

does it run good at wide open throttle? and does it idle well? I'm
sure you're running fresh gas in it. Old fuel will cause spark knock,
but will usually run crappy regardless of RPM, that is, if you can get
it started. You might also consider having the spark timing checked to
see if it hasn't slipped.


I don't think you have a stator problem, that is, unless the battery is
draining and isn't being charged.


The engine seems to be fine at WOT and also idles OK, it has fresh fuel
and has had about 15 gallons through it this season. Although it was
reluctant to fire this last trip out from cold, but after that started
OK each time. I need a workshop manual off e bay really I know, but I
was hoping there may be a common failing on a component on this engine.
Thanks for the reply BTW.