BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Just popped in to say........... (https://www.boatbanter.com/general/70105-just-popped-say.html)

JimH May 27th 06 10:31 PM

Just popped in to say...........
 
..............we are having a wonderful holiday weekend. We even took the
boat out today.

A word of thanks to those who lost their lives protecting our Country. My
thanks also to all of you who served.

The jumbo shrimp (these things are almost as big as lobster tails!) are done
as are portabella mushrooms and green peppers. Yum. Gotta run.

Have fun folks........enjoy the weekend. We certainly are. ;-)



Don White May 27th 06 11:05 PM

Just popped in to say...........
 
JimH wrote:
.............we are having a wonderful holiday weekend. We even took the
boat out today.

A word of thanks to those who lost their lives protecting our Country. My
thanks also to all of you who served.

The jumbo shrimp (these things are almost as big as lobster tails!) are done
as are portabella mushrooms and green peppers. Yum. Gotta run.

Have fun folks........enjoy the weekend. We certainly are. ;-)


D'oh! We dug 5 fence posts today, set the 4 x 4 in Sonotubes, mixed the
concrete and filled. Also had to take my new Ranger to the hardware
store & pick up more fence boards, posts more concrete mix etc. I'm
starting to like driving a pickup.
Gotta go back to the hardwre store tonight to get Tapcon screws (attach
2 x 4 to concrete foundation and hardware for gate in new fence.
Also have to go pickup meal for mom & myself. Wife is sick with bad cold
I passed to her this week.
Boy...a handiman's work is never done!

Don White May 28th 06 02:28 AM

Just popped in to say...........
 
Harry Krause wrote:


How deep did you bury the sonotubes? I need to dig holes for two larger
ones for a couple of 4x4 posts I want to "affix" to mother earth. I
wonder if I need 8" or 12" sonotubes?

Did you sit them on gravel before pouring in the sakcrete?


Just 3 feet...3.5 would have been ideal here re frostline.
Sure gets hard to dig much deaper than 3 feet if you're using a pointy
end dirt shovel.
We used 8" sonotubes.
Just after setting the sonotubes down into hole and checking alignment
of post along property line...we removed the post and dropped one
shovelfull of gravel into the sonotube, replaced & re-aligned post and
carefully shoveled the concrete mix into the tube. That should keep the
post end off the ground.

Don White May 28th 06 05:12 AM

Just popped in to say...........
 
Harry Krause wrote:
Don White wrote:

Harry Krause wrote:


How deep did you bury the sonotubes? I need to dig holes for two
larger ones for a couple of 4x4 posts I want to "affix" to mother
earth. I wonder if I need 8" or 12" sonotubes?

Did you sit them on gravel before pouring in the sakcrete?



Just 3 feet...3.5 would have been ideal here re frostline.
Sure gets hard to dig much deaper than 3 feet if you're using a pointy
end dirt shovel.
We used 8" sonotubes.
Just after setting the sonotubes down into hole and checking alignment
of post along property line...we removed the post and dropped one
shovelfull of gravel into the sonotube, replaced & re-aligned post and
carefully shoveled the concrete mix into the tube. That should keep
the post end off the ground.




I can rent a gas powered post hole digger for $20 for the afternoon.


Those things are great as long as you don't have a lot of large rocks.
Neighbour rented one and it would through the two of us around every
time the auger hit a big enough rock.

basskisser May 28th 06 03:10 PM

Just popped in to say...........
 

Harry Krause wrote:
Don White wrote:
Harry Krause wrote:
Don White wrote:

Harry Krause wrote:

How deep did you bury the sonotubes? I need to dig holes for two
larger ones for a couple of 4x4 posts I want to "affix" to mother
earth. I wonder if I need 8" or 12" sonotubes?

Did you sit them on gravel before pouring in the sakcrete?

Just 3 feet...3.5 would have been ideal here re frostline.
Sure gets hard to dig much deaper than 3 feet if you're using a pointy
end dirt shovel.
We used 8" sonotubes.
Just after setting the sonotubes down into hole and checking alignment
of post along property line...we removed the post and dropped one
shovelfull of gravel into the sonotube, replaced & re-aligned post and
carefully shoveled the concrete mix into the tube. That should keep
the post end off the ground.


I can rent a gas powered post hole digger for $20 for the afternoon.


Those things are great as long as you don't have a lot of large rocks.
Neighbour rented one and it would through the two of us around every
time the auger hit a big enough rock.



Fortunately, the soil in question here is not particularly rocky. I'm
setting posts on which to attach some semi-attractive garden hose
hangers. For some reason, my wife objects to my just dropping the hose
on the ground when I'm finished with it and letting it sit there until I
need it again. Women!


No need for sonotube, unless you are pouring a pier, then placing 4x4's
on TOP of the pier. If you are just encasing the post in concrete, just
dig an 8" hole, put the 4x4 in, plumb it up using diagonal stakes and
wet the sakcrete.


[email protected] May 28th 06 03:21 PM

Just popped in to say...........
 

JimH wrote:
.............we are having a wonderful holiday weekend. We even took the
boat out today.

A word of thanks to those who lost their lives protecting our Country. My
thanks also to all of you who served.

The jumbo shrimp (these things are almost as big as lobster tails!) are done
as are portabella mushrooms and green peppers. Yum. Gotta run.

Have fun folks........enjoy the weekend. We certainly are. ;-)


Have a great holiday.

I'm off to varnishville, myself, in just a little while. Raining cats
and dogs (of course) here in the Pacific North Wet- so it's a good
thing my boat is under cover.


jiminfl May 28th 06 03:49 PM

Just popped in to say...........
 
Does high humidity affect varnish application? I heard somewhere that
it does.
Jim


Reginald P. Smithers May 28th 06 04:41 PM

Just popped in to say...........
 
jiminfl wrote:
Does high humidity affect varnish application? I heard somewhere that
it does.
Jim

High Humidity will impact the application of varnish, high UV will
impact the longevity of the varnish..

--
Reggie

That's my story and I am sticking to it.

jps May 28th 06 06:47 PM

Just popped in to say...........
 
In article ,
jimhUNDERSCOREosudad@yahooDOTcom says...
.............we are having a wonderful holiday weekend. We even took the
boat out today.

A word of thanks to those who lost their lives protecting our Country. My
thanks also to all of you who served.

The jumbo shrimp (these things are almost as big as lobster tails!) are done
as are portabella mushrooms and green peppers. Yum. Gotta run.

Have fun folks........enjoy the weekend. We certainly are. ;-)


Keep your damned good times to yourself. We're all tired of you coming
in here and parading around with your good times, good food, happy
family crap.

Good times this, good times that...shoving it in our faces since you
have so much of it.

jps

Reginald P. Smithers May 28th 06 06:57 PM

Just popped in to say...........
 
jps wrote:
In article ,
jimhUNDERSCOREosudad@yahooDOTcom says...
.............we are having a wonderful holiday weekend. We even took the
boat out today.

A word of thanks to those who lost their lives protecting our Country. My
thanks also to all of you who served.

The jumbo shrimp (these things are almost as big as lobster tails!) are done
as are portabella mushrooms and green peppers. Yum. Gotta run.

Have fun folks........enjoy the weekend. We certainly are. ;-)


Keep your damned good times to yourself. We're all tired of you coming
in here and parading around with your good times, good food, happy
family crap.

Good times this, good times that...shoving it in our faces since you
have so much of it.

jps


Too funny.

I wonder if he will be able to understand your point?

--
Reggie

That's my story and I am sticking to it.


All times are GMT +1. The time now is 12:21 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com