Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
I need to make a rubbing of the serial number off a 2005 198R hurricane
deckboat and for the life of me i cant find it.Where is it located at? |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() "RH" wrote in message nk.net... I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? It seems that most boat manufacturers have standardized on the starboard transom. Stand behind your boat and look to the right of the engine, near the edge of the transom and above the water line. Sometimes the numbers are hard to see as they are stamped into the fiberglass with no color difference. RCE |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]() "RCE" wrote in message ... "RH" wrote in message nk.net... I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? It seems that most boat manufacturers have standardized on the starboard transom. Stand behind your boat and look to the right of the engine, near the edge of the transom and above the water line. Sometimes the numbers are hard to see as they are stamped into the fiberglass with no color difference. Usually they are on the starboard transom, but sometimes they will be on the starboard side of an integrated swim platform as well. If there is swim platform on the boat, look above it, on the edge of it, and under it on the starboard side. It should be there somewhere. This assumes that the Hurricane is a fiberglass boat. If it's an aluminum boat, I have no idea where it is, but would guess it's also somewhere near the starboard transom, probably with some sort of tag fastened to the hull or decking. |
#4
![]()
posted to rec.boats
|
|||
|
|||
![]() wrote in message oups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. |
#5
![]()
posted to rec.boats
|
|||
|
|||
![]() "RG" wrote in message m... wrote in message oups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. When the OP first asked, I did a quick Google for his boat and found a couple of stern view pictures of two that were for sale. Neither had an obvious plate like the one Chuck found. Either that or you just couldn't see them. I thought the hull number had to be put on in a way that it would be obvious if it was tampered with ... RCE |
#6
![]()
posted to rec.boats
|
|||
|
|||
![]() "RCE" wrote in message ... "RG" wrote in message m... wrote in message oups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. When the OP first asked, I did a quick Google for his boat and found a couple of stern view pictures of two that were for sale. Neither had an obvious plate like the one Chuck found. Either that or you just couldn't see them. I thought the hull number had to be put on in a way that it would be obvious if it was tampered with ... RCE That has been the experience with each boat I have owned........it was always imprinted in the gelcoat and always on the starboard side on the transom. That method is not tamperproof as on can easily grind out the numbers, re-gelcoat and imprint a new number in the new gelcoat. ;-) |
#7
![]()
posted to rec.boats
|
|||
|
|||
![]() RG wrote: wrote in message oups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. The numbers should be stamped into the plate. If so, it's possible to get a rubbing by pressing very lightly with the pencil. Even the smallest depression will show up with a careful enough technique. I'd be reluctant to buy a boat with a missing HIN. Theoretically, the plate isn't supposed to be removable without doing some serious damage to the hull.....but I wouldn't be easily convinced that's the case by looking at the plate in the photo. Almost looks like its held on with pop rivets. (!) |
#8
![]()
posted to rec.boats
|
|||
|
|||
![]()
RCE wrote:
"RG" wrote in message m... wrote in message groups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. When the OP first asked, I did a quick Google for his boat and found a couple of stern view pictures of two that were for sale. Neither had an obvious plate like the one Chuck found. Either that or you just couldn't see them. I thought the hull number had to be put on in a way that it would be obvious if it was tampered with ... RCE Here's how mine looks.. http://img.photobucket.com/albums/v2...d/Hpim0110.jpg |
#9
![]()
posted to rec.boats
|
|||
|
|||
![]() "Don White" wrote in message ... RCE wrote: "RG" wrote in message m... wrote in message egroups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. When the OP first asked, I did a quick Google for his boat and found a couple of stern view pictures of two that were for sale. Neither had an obvious plate like the one Chuck found. Either that or you just couldn't see them. I thought the hull number had to be put on in a way that it would be obvious if it was tampered with ... RCE Here's how mine looks.. http://img.photobucket.com/albums/v2...d/Hpim0110.jpg That's pretty typical on fiberglass hulls. RCE |
#10
![]()
posted to rec.boats
|
|||
|
|||
![]()
RCE wrote:
"Don White" wrote in message ... RCE wrote: "RG" wrote in message .com... wrote in message legroups.com... RH wrote: I need to make a rubbing of the serial number off a 2005 198R hurricane deckboat and for the life of me i cant find it.Where is it located at? See photo at: http://www.boat-world.com/displaypic...332743&picno=2 enlarge if you need to. See the plate to the right of the outboard? Bingo. :-) Wonder how he's gonna do a rubbing off of that? It doesn't look like it's got any 3D relief to it. I also wonder if maybe the plate has gone missing. Not sure how anyone could have missed anything that obvious. When the OP first asked, I did a quick Google for his boat and found a couple of stern view pictures of two that were for sale. Neither had an obvious plate like the one Chuck found. Either that or you just couldn't see them. I thought the hull number had to be put on in a way that it would be obvious if it was tampered with ... RCE Here's how mine looks.. http://img.photobucket.com/albums/v2...d/Hpim0110.jpg That's pretty typical on fiberglass hulls. RCE I also have a little metal plate with my hull number/sail number rivited to the transom inside the cockpit. http://img.photobucket.com/albums/v2...d/Hpim0109.jpg |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
So where is...................... | General | |||
Sailing in hurricane alley! | ASA | |||
Notes from hurricane Wilma. | General | |||
Wilma - Looks like another bad one | General |