mercury stator 9 or 16 amp HELP PLEASE!!!!
 

Hi, i have had a "no spark" problem, and have tracked it down to the
stator, all good, no!, it seems tho there is 3 different stators, 9,16
and 40... now i have no i.d. on my engine at all...and i'm very stuck
to know what one i need, i know its a 398-5454, b4t at the end 6f 5t
sh643d say s60eth5ng 352e "A32 A7 etc "..b4t they have been rubbed off
over the years and now am rather stuck to say the least!!!....So..

1, if there is any way of telling the age of the motor by some onther
means, e.g. carb numbers etc...or
2, if anyone knows the difference between the 9,16 and 40 stator i
would need??...PLEASE GUYS AND GIRLS HELP ME OUT HERE!!!!! many thanks
Danny.

mercury stator 9 or 16 amp HELP PLEASE!!!!
 

p.s. sorry i hit the num lock, i ment to type was.." I know its a
398-5454, but at the end of the numbers it follows with a A32, A7, etc
etc... and they have been rubbed off over the years and now i'm totally
at a standstill..."....thanks!

mercury stator 9 or 16 amp HELP PLEASE!!!!
 

Hi bud, thanks for the reply, where did you get your aftermarket part
from please?, and mine is a 200 v6 black max unit...many thanks Danny.

mercury stator 9 or 16 amp HELP PLEASE!!!!
 

Dodgydan wrote:

Hi bud, thanks for the reply, where did you get your aftermarket part
from please?, and mine is a 200 v6 black max unit...many thanks Danny.


No regulator - use this:

http://images.google.com/images?q=sierra+18-5857

Voltage regulator in circuit use this:

http://images.google.com/images?q=sierra+18-5860

Rob