BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Skeg (https://www.boatbanter.com/general/66825-skeg.html)

Jim Gemmill February 21st 06 02:57 AM

Skeg
 
I broke about half the skeg off my Mercruiser outdrive. Is it repairable or
will I need a new lower unit case?
Thanks in advance for any help.

--
Jim Gemmill
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)

(o o)
--ooOo-(_)-oOoo---



bluewaterboatservices February 21st 06 03:29 AM

Skeg
 
Jim,
You can buy a new skeg for around 30 bucks and have someone weld it on
for you, or you can buy a stainless steel skeg guard and install it
yourself .... they run around 100 bucks.
Good luck,
Rob




Jim Gemmill wrote:
I broke about half the skeg off my Mercruiser outdrive. Is it repairableor
will I need a new lower unit case?
Thanks in advance for any help.

--
Jim Gemmill
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)

(o o)
--ooOo-(_)-oOoo---



Calif Bill February 21st 06 03:29 AM

Skeg
 

"Jim Gemmill" wrote in message
...
I broke about half the skeg off my Mercruiser outdrive. Is it repairable
or
will I need a new lower unit case?
Thanks in advance for any help.

--
Jim Gemmill
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)

(o o)
--ooOo-(_)-oOoo---



Take it to a prop shop. they will weld on a new piece. maybe a $100.



Don Dando February 21st 06 04:39 AM

Skeg
 
A good welder can repair it. Keep cold wet rags on the gear housing to
prevent ruining the seals.

Don Dando


"Jim Gemmill" wrote in message
...
I broke about half the skeg off my Mercruiser outdrive. Is it repairable

or
will I need a new lower unit case?
Thanks in advance for any help.

--
Jim Gemmill
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)

(o o)
--ooOo-(_)-oOoo---





Jim Gemmill February 21st 06 03:43 PM

Skeg
 
Thanks for the advice. I'll be seeking a repair shop in Phoenix soon.
"bluewaterboatservices" wrote in message
ups.com...
Jim,
You can buy a new skeg for around 30 bucks and have someone weld it on
for you, or you can buy a stainless steel skeg guard and install it
yourself .... they run around 100 bucks.
Good luck,
Rob




Jim Gemmill wrote:
I broke about half the skeg off my Mercruiser outdrive. Is it repairable

or
will I need a new lower unit case?
Thanks in advance for any help.

--
Jim Gemmill
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)

(o o)
--ooOo-(_)-oOoo---





All times are GMT +1. The time now is 06:44 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright İ2004 - 2014 BoatBanter.com