How heavy? Evinrude 1976 150hp V6??
 

Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.

It is over 300 lbs. No way to lift it by hand. If you could back right up
to it you might lean it over against the tailgait and then lift the lower
unit and slide it in. Just make sure it is on a blanket or something that
will protect the lower part of the cowling that does not remove. Even then
you stand a good chance of breaking the lower part of the cowl.

Best to get a lift.

--
Tony
my boats and cars at http://t.thomas.home.mchsi.com

-
"gudmundur" wrote in message
...
Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.

Around 5/14/2005 5:19 PM, tony thomas wrote:

It is over 300 lbs. No way to lift it by hand.

Wuss. :)


Best to get a lift.

I agree. Even if two guys /could/ lift it, it'd be extremely awkward to
move. The likelihood of a crushed foot would be pretty high.

--
~/Garth - 1966 Glastron V-142 Skiflite: "Blue-Boat"
"There is nothing - absolutely nothing - half so much worth doing
as simply messing about in boats."
-Kenneth Grahame, The Wind in the Willows

On Sun, 15 May 2005 00:08:48 -0000, (gudmundur)
wrote:

Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.

Besides being awkward, it's probably around 400/450 lbs. Ain't gonna
happen with two guys. I restored a 75 hp Johnson and damn near killed
myself trying to lift it by myself. Out came the engine hoist.

Rent the engine hoist - or borrow one from somebody.

Later,

Tom.

gudmundur wrote:
Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.


The cross flow V-4 weighs in at about 312 lbs., the V-6 is about 386
lbs, add 15 lbs. for XL shaft length.

Rob

Dont know where you are, but if your in the Tacoma/Seattle area, I have a
engine hoist you can borrow.
"gudmundur" wrote in message
...
Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.

"ed" wrote in message
...
Dont know where you are, but if your in the Tacoma/Seattle area, I have a
engine hoist you can borrow.
"gudmundur" wrote in message
...
Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.



It has to be somewhere in excess of 400 pounds, which is more than I would
want to be involved in picking up and putting in a truck, even with a
helper. You might be able to get by with a come along over a branch or
reinforced garage rafter.

On Sun, 15 May 2005 00:08:48 -0000, (gudmundur)
wrote:

Can someone give me a rough idea of the weight of a 150 Evinrude V6?
I can't find a spec sheet on this. Wondering if 2 guys can lift it onto
my truck, or should I rent an engine hoist like for a car V8 engine.

About 300 lbs. I can lift mine easily into my Hummer H2, by myself.
Me and the wife
http://pg.photos.yahoo.com/ph/harkra...bum?.dir=/1323