BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Correct Trailer set up for towing my speedboat. (https://www.boatbanter.com/general/339-correct-trailer-set-up-towing-my-speedboat.html)

Chester July 25th 03 08:29 AM

Correct Trailer set up for towing my speedboat.
 
I bought a 16 ft Chrysler speedboat with a 140 HP Johnson outboard. I
towed it home about 120 miles and started to look things over more
closely and discovered that one of the bolts holding the main trailer
structure together was missing. So it is obvious the trailer needs a
proper going over.

There are two rows of six those little black rubber "wobbling" wheels
and three black rubber rollers up the middle. My first question is
how much of the load are those little black wheels supposed to support
, are they just for stability and not for carrying much load?

Second question is where should the wobbling wheels contact the hull
? I assume the level spots between the chines ? Would it be best to
have the wheels contact the outermost level spots for the widest
possible distance between the banks of wheels ?

Those center rubber supports, do they all share the load equally ?
How do you set them up in concert with everything else so that things
all work out together ? Are there any little tricks to do this right ?

How should I level the boat to sit on the trailer for towing ? The
low trailer tounge height behind my van keeps the trailer angled
downward in the front so should I offset this by adjusting the trailer
to raise the bow of the boat so the boat sits level relative to the
ground?

The prop sits too low to the ground so the motor has to be tilted
while towing. Do you recommend using some kind of support from the
lower end to the trailer ?

Also when I leave the boat on the trailer in the backyard is it
beneficial to lower the motor and let it rest on a board to take some
of the weight off the transom and / or hull on the trailer (
engineering is not my speciality so I don't have a clue if that would
really make any difference or not) ?

This little boat " ROCKS " !!!!!!!!!!!!!!!!!!!!!1

Thanks for any help and any little tricks to help me set up my towing
for safety and to minimize the wear and tear on the boat.

Woodchuck July 25th 03 12:16 PM

Correct Trailer set up for towing my speedboat.
 
How fast is your boat?

"Chester" wrote in message
m...
I bought a 16 ft Chrysler speedboat with a 140 HP Johnson outboard. I
towed it home about 120 miles and started to look things over more
closely and discovered that one of the bolts holding the main trailer
structure together was missing. So it is obvious the trailer needs a
proper going over.

There are two rows of six those little black rubber "wobbling" wheels
and three black rubber rollers up the middle. My first question is
how much of the load are those little black wheels supposed to support
, are they just for stability and not for carrying much load?

Second question is where should the wobbling wheels contact the hull
? I assume the level spots between the chines ? Would it be best to
have the wheels contact the outermost level spots for the widest
possible distance between the banks of wheels ?

Those center rubber supports, do they all share the load equally ?
How do you set them up in concert with everything else so that things
all work out together ? Are there any little tricks to do this right ?

How should I level the boat to sit on the trailer for towing ? The
low trailer tounge height behind my van keeps the trailer angled
downward in the front so should I offset this by adjusting the trailer
to raise the bow of the boat so the boat sits level relative to the
ground?

The prop sits too low to the ground so the motor has to be tilted
while towing. Do you recommend using some kind of support from the
lower end to the trailer ?

Also when I leave the boat on the trailer in the backyard is it
beneficial to lower the motor and let it rest on a board to take some
of the weight off the transom and / or hull on the trailer (
engineering is not my speciality so I don't have a clue if that would
really make any difference or not) ?

This little boat " ROCKS " !!!!!!!!!!!!!!!!!!!!!1

Thanks for any help and any little tricks to help me set up my towing
for safety and to minimize the wear and tear on the boat.




Brian Cleveland July 25th 03 04:28 PM

Correct Trailer set up for towing my speedboat.
 


How should I level the boat to sit on the trailer for towing ? The
low trailer tounge height behind my van keeps the trailer angled
downward in the front so should I offset this by adjusting the trailer
to raise the bow of the boat so the boat sits level relative to the
ground?


You should adjust the hitch so that the trailer sets level


The prop sits too low to the ground so the motor has to be tilted
while towing. Do you recommend using some kind of support from the
lower end to the trailer ?


They make a device called a transom saver (one manf.) for just this purpose


BC



Chester July 28th 03 12:55 PM

Correct Trailer set up for towing my speedboat.
 
"Woodchuck" wrote in message ...
How fast is your boat?

The boat does 50 mph with a 21 pitch prop. On saturday I had a 19

pitch prop and a hydrofoil fin; with 3 adults and two kids in the boat
I could pull up a skier no problem. Last year my 12 year old daughter
said "you suck dad" when my 13 foot boat with a 25 hp motor couldn't
get on plane with three people in the boat and two on a tube.
I was going to put a 50m hp on the old boat but for the money selling
it and buying a used setup was the best way to go.


All times are GMT +1. The time now is 03:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com