![]() |
Speed boat water ballast
My Wave Rider Mustang 14' speed boat has alot of water beneath the cockpit floor. Before I drill a hole to drain it out, please can anyone tell me if it is supposed to be there as water ballast? Thanks
|
No it is not. If left in there it will rot out the floor and stringers.
-- Tony my boats and cars at http://t.thomas.home.mchsi.com "h_copter" wrote in message ... My Wave Rider Mustang 14' speed boat has alot of water beneath the cockpit floor. Before I drill a hole to drain it out, please can anyone tell me if it is supposed to be there as water ballast? Thanks -- h_copter |
Uh, where do you plan to "drill a hole"? I think Wil E. Coyote tried
that in a roadrunner cartoon- and the results were less than satisfactory. :-) Use a bilge pump instead, then watch carefully to see whether you can detect where the water leaks in. (Could be rain water, depending how the boat is stored). Once that has been determined, you will want to undertake repairs. Your 14 boat almost certainly isn't an inboard, so you should ideally have zero water in the bilge. |
Uh, where do you plan to "drill a hole"?
I wuz kinda wondern' that myself.... --Mike wrote in message oups.com... Uh, where do you plan to "drill a hole"? I think Wil E. Coyote tried that in a roadrunner cartoon- and the results were less than satisfactory. :-) Use a bilge pump instead, then watch carefully to see whether you can detect where the water leaks in. (Could be rain water, depending how the boat is stored). Once that has been determined, you will want to undertake repairs. Your 14 boat almost certainly isn't an inboard, so you should ideally have zero water in the bilge. |
On Thu, 24 Feb 2005 02:58:34 GMT, "mgg" wrote:
Uh, where do you plan to "drill a hole"? I wuz kinda wondern' that myself.... ================================== True story follows: A friend of mine in Connecticut had a college kid maintaining his 40 foot sailboat one summer. Friend gets a call one afternoon from the kid explaining why there is now a bolt in the shower sump. It seems the sump had not been fully draining, so our maintenance hero decided to drill an additional drain hole - right through the bottom of the boat as it turned out. Not quite knowing what to do with the resulting artesian well, he tapped the hole for a stainless machine screw, put some bedding compound on it, and called my friend for further instruction. |
LOL! At least he was smart enough to use a SS screw! g
--Mike "Wayne.B" wrote in message ... On Thu, 24 Feb 2005 02:58:34 GMT, "mgg" wrote: Uh, where do you plan to "drill a hole"? I wuz kinda wondern' that myself.... ================================== True story follows: A friend of mine in Connecticut had a college kid maintaining his 40 foot sailboat one summer. Friend gets a call one afternoon from the kid explaining why there is now a bolt in the shower sump. It seems the sump had not been fully draining, so our maintenance hero decided to drill an additional drain hole - right through the bottom of the boat as it turned out. Not quite knowing what to do with the resulting artesian well, he tapped the hole for a stainless machine screw, put some bedding compound on it, and called my friend for further instruction. |
On Wed, 23 Feb 2005 10:03:04 +0000, h_copter
wrote: My Wave Rider Mustang 14' speed boat has alot of water beneath the cockpit floor. Before I drill a hole to drain it out, please can anyone tell me if it is supposed to be there as water ballast? Thanks It is a ballast. It helps the boat coner better. |
Quote:
|
"h_copter" wrote in message ... Harry Krause Wrote: On Wed, 23 Feb 2005 10:03:04 +0000, h_copter wrote: - My Wave Rider Mustang 14' speed boat has alot of water beneath the cockpit floor. Before I drill a hole to drain it out, please can anyone tell me if it is supposed to be there as water ballast? Thanks- It is a ballast. It helps the boat coner better. Thanks. I have now had replies that it is and is-not ballast! Can anyone point to other sources of information on this? By the way, I was not planning on drilling through hull! There is a well at the back of the boat with a bilge pump that the cockpit drains into. The sealed compartment beneath the cockpit floor is forward of this. -- h_copter Yep, you are right. And yet more proof our resident village idiot knows nothing about what he spews. H-copter, ignore Krause. He is a proven liar, and doesn't even own a boat. He lurks here only to troll, and disrupt the group. He has nothing to contribute here. BTW, what's the deal with your handle? Do you pilot a chopper? -- -Netsock "It's just about going fast...that's all..." http://home.columbus.rr.com/ckg/ |
In article , h_copter.1l5xc1
@news.boatbanter.com says... Thanks. I have now had replies that it is and is-not ballast! Can anyone point to other sources of information on this? The people who built the boat -- Mike G. Heirloom Woods www.heirloom-woods.net |
On Mon, 28 Feb 2005 10:25:32 +0000, h_copter
wrote: Harry Krause Wrote: On Wed, 23 Feb 2005 10:03:04 +0000, h_copter wrote: - My Wave Rider Mustang 14' speed boat has alot of water beneath the cockpit floor. Before I drill a hole to drain it out, please can anyone tell me if it is supposed to be there as water ballast? Thanks- It is a ballast. It helps the boat coner better. Thanks. I have now had replies that it is and is-not ballast! Can anyone point to other sources of information on this? By the way, I was not planning on drilling through hull! There is a well at the back of the boat with a bilge pump that the cockpit drains into. The sealed compartment beneath the cockpit floor is forward of this. Your boat does not appear to be a boat which would require water as ballast. The water has probably gotten there by rainfall or some other nefarious means. I would not drill a hole through anything. If you drill through wood and water drains through this hole, you will rot the wood. How is the water getting there? If this is continuous, then I'd be looking for the problem. If it's a rare occurence, then I'd bail the water with a can, sop up the leftover with a sponge, and try to figure out the source of the water. Don't drill yet. Post some pictures somewhere. John H On the 'PocoLoco' out of Deale, MD, on the beautiful Chesapeake Bay! "Divide each difficulty into as many parts as is feasible and necessary to resolve it." Rene Descartes |
All times are GMT +1. The time now is 06:24 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com