EPIRB decal question
 

I recently purchased an ACR Globalfix EPIRB for my boat. I registered it
and received my COSPAS-SARSAT decal in the mail. It came with instructions
that say "You should affix the decal to the beacon in such a way that it is
visible when the beacon is properly mounted." My EPIRB is a category I
beacon that is mounted in a "clamshell" bracket with a hydrostatic release
so that it will automatically deploy and activate if the boat sinks before I
can reach the EPIRB to deploy and activate it manually.

The problem is that when it is properly mounted, the beacon itself is not
visible at all. It is inside of the mounting bracket. So, do I put the
decal on the beacon, or the mounting bracket? If I put it on the mounting
bracket, it will be visible, but does not exactly comply with the
instructions I received. Also, if I wanted to take the beacon on a friends
boat or something, I would have to remove it from the bracket and then it
would have no decal on it.

What am I supposed to do?

Thanks!

Gary

Put it on the EPIRB. "Should" be affixed so it's visible so if you
need to show it to anyone, you won't have to take it out of the mount.
But if your mount completly encloses is the EPIRB, you can't comply
with that recommendation. Don't worry about it.

Subject: EPIRB decal question
From: "Gary"

The problem is that when it is properly mounted, the beacon itself is not
visible at all. It is inside of the mounting bracket. So, do I put the
decal on the beacon, or the mounting bracket? If I put it on the mounting
bracket, it will be visible, but does not exactly comply with the
instructions I received. Also, if I wanted to take the beacon on a friends
boat or something, I would have to remove it from the bracket and then it
would have no decal on it.

What am I supposed to do?

Relax and stick the sticker on the EPIRB.

Capt. Bill

Consider it done. Thanks!!!



"LaBomba182" wrote in message
...
Subject: EPIRB decal question
From: "Gary"

The problem is that when it is properly mounted, the beacon itself is not
visible at all. It is inside of the mounting bracket. So, do I put the
decal on the beacon, or the mounting bracket? If I put it on the
mounting
bracket, it will be visible, but does not exactly comply with the
instructions I received. Also, if I wanted to take the beacon on a
friends
boat or something, I would have to remove it from the bracket and then it
would have no decal on it.

What am I supposed to do?

Relax and stick the sticker on the EPIRB.

Capt. Bill