Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have a 2000 SeaArk ZX170 and want to remove the rear deck. I have removed
all the screws I can find (45) but the deck seems to be hanging on the storage compartments and the live well. Any suggestions on what I need to do? Thanks in advance for any help you can give. |
#2
![]() |
|||
|
|||
![]()
Most boats have the live well and storage compartments sealed at the top so
you don't get water splash over into the bilge from the livewell or if you use the storage for an icechest. You may need to take a knife and cut the silicone loose. I assume you have removed the lids or made sure the screws for the lids are not holding the deck down. Tony "Craig Davis" wrote in message ... I have a 2000 SeaArk ZX170 and want to remove the rear deck. I have removed all the screws I can find (45) but the deck seems to be hanging on the storage compartments and the live well. Any suggestions on what I need to do? Thanks in advance for any help you can give. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
removing non slip deck paint | Boat Building | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General |