BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Cleaning Shore Power Cables (https://www.boatbanter.com/general/25095-cleaning-shore-power-cables.html)

Wayne.B November 12th 04 07:03 PM

Cleaning Shore Power Cables
 
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?

Short Wave Sportfishing November 12th 04 07:05 PM

On Fri, 12 Nov 2004 14:03:12 -0500, Wayne.B
wrote:

I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


I'm telling you, this stuff is the best. Beats 409, Green Stuff,
Armor All - anything.

http://www.303products.com/main.php?...ge=spotremover

Later,

Tom

Short Wave Sportfishing November 12th 04 07:09 PM

On Fri, 12 Nov 2004 19:05:26 GMT, Short Wave Sportfishing
wrote:

On Fri, 12 Nov 2004 14:03:12 -0500, Wayne.B
wrote:

I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


I'm telling you, this stuff is the best. Beats 409, Green Stuff,
Armor All - anything.

http://www.303products.com/main.php?...ge=spotremover


Whoopsie - wrong one.

http://www.303products.com/main.php?...rospacecleaner

Got a little carried away there. My bad. :)

Later,

Tom

JohnH November 12th 04 07:46 PM

On Fri, 12 Nov 2004 14:03:12 -0500, Wayne.B
wrote:

I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


Mineral spirits on a rag, if it's grease and oil. Soap and water if
it's dirt.

John H

On the 'PocoLoco' out of Deale, MD,
on the beautiful Chesapeake Bay!

JimH November 12th 04 08:03 PM


"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


Acetone works pretty good.



DSK November 12th 04 08:04 PM

Wayne.B wrote:
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


Try Oxi-Clean. We use it on a lot of stuff around the boat and had no
trouble with any kind of plastic. Don't get it on varnish or natural
wood, though.

Fair Skies
Doug King


Gary Warner November 12th 04 08:19 PM


"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


I wonder if soaking them overnight
in a bucket of any of the solutions
already mentioned might help loosen
up the grunge so you have less work.

I realize it might need to be a big bucket -
or a couple of them...



JimH November 12th 04 08:24 PM


"Gary Warner" wrote in message
...

"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


I wonder if soaking them overnight
in a bucket of any of the solutions
already mentioned might help loosen
up the grunge so you have less work.

I realize it might need to be a big bucket -
or a couple of them...



You could not do it with the acetone. Acetone causes the surface to become
sticky when just rubbing it on lightly with a rag. Soaking the cable in
acetone might cause some serious damage to the insulation.



Lew Hodgett November 12th 04 08:40 PM


"JimH" writes:

Acetone works pretty good.


It is self defeating to use acetone since it also removes the plasticizer
and with in a very short time, you have an even bigger mess on your hands.

Never found a solution I liked, just learned to live with it.

Lew



TSailor November 12th 04 09:08 PM

I have used 3M General Purpose Adhesive Remover on paper towels, but it
takes a fair amount of work. It did last for a year or two before needing it
again.

Tsailor

"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?




Doug Dotson November 13th 04 12:13 AM

Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list :)

Doug
s/v Callista

"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?




Doug Kanter November 13th 04 12:38 PM


"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?


You need something that works fast on grease, but won't mess with the
plastic. Put on some gloves and use a very concentrated solution of Dawn
dish liquid applied with the rough side of a two-sided dish sponge. Whatever
doesn't come off with that doesn't matter unless you're anal about seeing
perfect yellow.

After the cord dries, apply a light coating of ArmorAll or Son of a Gun to
help maintain flexibility.



Karl Denninger November 14th 04 04:39 PM

Its not great. Made the mistake of wasting money on it once.

--
--
Karl Denninger ) Internet Consultant & Kids Rights Activist
http://www.denninger.net My home on the net - links to everything I do!
http://scubaforum.org Your UNCENSORED place to talk about DIVING!
http://www.spamcuda.net SPAM FREE mailboxes - FREE FOR A LIMITED TIME!
http://genesis3.blogspot.com Musings Of A Sentient Mind

In article ,
Doug Dotson wrote:


Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list :)

Doug
s/v Callista

"Wayne.B" wrote in message
.. .
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?






Wayne.B November 14th 04 07:22 PM

In article ,
Doug Dotson wrote:

Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list :)

Doug
s/v Callista

==================================================
On Sun, 14 Nov 2004 16:39:50 GMT, (Karl
Denninger) wrote:

Its not great. Made the mistake of wasting money on it once.

==================================================

I agree. I was having better luck with Simple Green and a 3M scrubbing
pad. I've been reluctant to try anything more agressive out of
concern for ending up with sticky cables. Once that happens, the
rubber breaks down and sheds on to everything.




Doug Dotson November 14th 04 10:07 PM

Glad I never tried anything to clean them. Just not worth it to
impress the neighbors.

Doug
s/v Callista

"Wayne.B" wrote in message
...
In article ,
Doug Dotson wrote:

Starbrite sells a product specifically for cleaning shorepower
cables. It is called "Power Cable Cleaner/Protector". I have
no idea if it works. Keeping shorepower cables clean is
not at the top of my list :)

Doug
s/v Callista

==================================================
On Sun, 14 Nov 2004 16:39:50 GMT, (Karl
Denninger) wrote:

Its not great. Made the mistake of wasting money on it once.

==================================================

I agree. I was having better luck with Simple Green and a 3M scrubbing
pad. I've been reluctant to try anything more agressive out of
concern for ending up with sticky cables. Once that happens, the
rubber breaks down and sheds on to everything.






Wayne.B November 14th 04 10:16 PM

On Sun, 14 Nov 2004 17:07:22 -0500, "Doug Dotson"
wrote:

Glad I never tried anything to clean them. Just not worth it to
impress the neighbors.


=====================================

It was more a matter of trying not to depress them. :-)

Also the contrast of my nice new dock with grungy cables was a
fearsome sight.


Short Wave Sportfishing November 14th 04 10:32 PM

On Sun, 14 Nov 2004 17:16:00 -0500, Wayne.B
wrote:

On Sun, 14 Nov 2004 17:07:22 -0500, "Doug Dotson"
wrote:

Glad I never tried anything to clean them. Just not worth it to
impress the neighbors.


=====================================

It was more a matter of trying not to depress them. :-)

Also the contrast of my nice new dock with grungy cables was a
fearsome sight.


Use that 303 stuff I told you about - my brother used it on his shore
line and that was really abused. Came out looking practically brand
new - practically. :)

Later,

Tom

Wayne.B November 14th 04 11:32 PM

On Sun, 14 Nov 2004 22:32:46 GMT, Short Wave Sportfishing
wrote:

Use that 303 stuff I told you about - my brother used it on his shore
line and that was really abused. Came out looking practically brand
new - practically. :)


==========================

I tried to find it at the local marine emporiums and struck out. I
guess I'll have to order it online. Where did your brother get his?


Eisboch November 14th 04 11:44 PM

Wayne.B wrote:
On Sun, 14 Nov 2004 22:32:46 GMT, Short Wave Sportfishing
wrote:


Use that 303 stuff I told you about - my brother used it on his shore
line and that was really abused. Came out looking practically brand
new - practically. :)



==========================

I tried to find it at the local marine emporiums and struck out. I
guess I'll have to order it online. Where did your brother get his?


(Butting in here)

You might find it at an automotive store or an RV joint.

Eisboch

JimH November 14th 04 11:46 PM


"Wayne.B" wrote in message
...
On Sun, 14 Nov 2004 22:32:46 GMT, Short Wave Sportfishing
wrote:

Use that 303 stuff I told you about - my brother used it on his shore
line and that was really abused. Came out looking practically brand
new - practically. :)


==========================

I tried to find it at the local marine emporiums and struck out. I
guess I'll have to order it online. Where did your brother get his?


Used to get mine at either BoatUS, BoatersWorld or West Marine.

There are lots of places on the web to buy it also.



Short Wave Sportfishing November 15th 04 12:16 AM

On Sun, 14 Nov 2004 18:32:27 -0500, Wayne.B
wrote:

On Sun, 14 Nov 2004 22:32:46 GMT, Short Wave Sportfishing
wrote:

Use that 303 stuff I told you about - my brother used it on his shore
line and that was really abused. Came out looking practically brand
new - practically. :)


==========================

I tried to find it at the local marine emporiums and struck out. I
guess I'll have to order it online. Where did your brother get his?


From me. :)

I'm surprised that the locals didn't have it. Try the site for your
area code and see what that produces. Around here, you can find it at
most of the local marine stores - Kellogs supplies it to them.

Later,

Tom

Garland Gray II November 15th 04 03:03 AM

I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.



Wayne.B November 15th 04 03:26 AM

On Sun, 14 Nov 2004 22:03:55 -0500, "Garland Gray II"
wrote:
I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.

===================================

Interesting, I'll have to try it on an old fender that has gotten to
the sticky film stage. With fenders I usually just toss them out and
buy new but these 50 amp shore power cables are 50 feet each and have
the look of big replacement $$$s about them.


Doug Dotson November 15th 04 04:14 AM

I think a 50' 50A cable is just under $600. OUCH!

"Wayne.B" wrote in message
...
On Sun, 14 Nov 2004 22:03:55 -0500, "Garland Gray II"
wrote:
I don't know how long it will last, but the Starbrite cleaner removed the
sticky film from the cable that had been getting on the deck. Didn't take
too long --my cable is only 25 ft.
It was either clean the cable or the deck, or get a new cable.

===================================

Interesting, I'll have to try it on an old fender that has gotten to
the sticky film stage. With fenders I usually just toss them out and
buy new but these 50 amp shore power cables are 50 feet each and have
the look of big replacement $$$s about them.




Wayne.B November 15th 04 12:28 PM

On Sun, 14 Nov 2004 23:14:09 -0500, "Doug Dotson"
wrote:

I think a 50' 50A cable is just under $600. OUCH!


========================================

I haven't priced them but wouldn't be surprised. Each one is about an
inch in diameter.


Keith November 15th 04 01:21 PM

Starbrite actually makes a pretty effective shore power cable cleaner. Use
it with Scotchbrite pads, and it'll work better than most anything I've
found. You can also try Simple Green with Barkeeper's Friend scrubbing
powder. Don't use any solvents, or you will certainly ruin them.

--


Keith
__
No husband has ever been shot while doing the dishes.
"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?




Garland Gray II November 16th 04 02:38 AM


"Doug Dotson" wrote in message
...
I think a 50' 50A cable is just under $600. OUCH!


OUCH is right! Mine is 25 ft/30 A.



jam24u November 16th 04 03:09 PM

17 years in the boat buisness says "easy off oven cleaner".
you will probably lose the cables gloss however if your not careful,
but glossy cables are only important to dock sailors anyway.

Phil November 17th 04 12:07 AM

soak them overnight in a bleach solution. Mine get a little mildew on them
once in a while and that cleans them well.



Wayne.B November 17th 04 03:24 AM

On Wed, 17 Nov 2004 00:07:13 GMT, "Phil" wrote:

soak them overnight in a bleach solution.


===================================

Good suggestion but I'd need 50 gallon barrels for that. These are
BIG cables, otherwise I'd just replace them.


Gould 0738 November 17th 04 03:37 AM

soak them overnight in a bleach solution.

===================================

Good suggestion but I'd need 50 gallon barrels for that. These are
BIG cables, otherwise I'd just replace them.




Got a bath tub? Keep the ends out of the solution.

Short Wave Sportfishing November 17th 04 11:26 AM

On 17 Nov 2004 03:37:22 GMT, (Gould 0738) wrote:

soak them overnight in a bleach solution.


===================================

Good suggestion but I'd need 50 gallon barrels for that. These are
BIG cables, otherwise I'd just replace them.


Got a bath tub? Keep the ends out of the solution.


Back when I was into black powder rifles and did a lot of hunting, I
made the mistake of soak cleaning one of my BP shotgun barrels in the
bath tub.

My wife was not amused.

Later,

Tom

Wayne.B November 17th 04 12:35 PM

On 17 Nov 2004 03:37:22 GMT, (Gould 0738) wrote:
soak them overnight in a bleach solution.


===================================

Good suggestion but I'd need 50 gallon barrels for that. These are
BIG cables, otherwise I'd just replace them.


Got a bath tub? Keep the ends out of the solution.


============================================

That would get ME in hot water pretty quickly, bleach would be
optional depending on just how severely the crime was viewed by Mrs B.
In any case I'd be seen as part of the problem, not part of the
solution.

Speaking of hot water, maybe I could get her a new set of cables for
Christmas...


noone November 17th 04 06:42 PM

Get some hand cleaner from an automotive parts supply place. It's typically
a gel that dissolves grease. Apply it to a dry cable and work it into the
grime. The resulting residue is water soluable, so just rinse it off.

Some of the brands I've seen are GO-JO and Fast Orange. These cleaners may
or may not have an abrasive grit mixed into them. I don't find the grit
necessary, but others must. It's not a bad thing to have around a boat
anyway.

Bob


"Wayne.B" wrote in message
...
I have a set of grungy looking yellow 50 amp cables that I'd like to
clean up.

Does anyone know of a good cleaning product and/or technique short of
going out and buying new ones?




Maynard G. Krebbs November 18th 04 05:35 AM

On Wed, 17 Nov 2004 18:42:19 GMT, "noone" wrote:

Get some hand cleaner from an automotive parts supply place. It's typically
a gel that dissolves grease. Apply it to a dry cable and work it into the
grime. The resulting residue is water soluable, so just rinse it off.

Some of the brands I've seen are GO-JO and Fast Orange. These cleaners may
or may not have an abrasive grit mixed into them. I don't find the grit
necessary, but others must. It's not a bad thing to have around a boat
anyway.

Bob


And GO-JO will give you the best blade shave. Really! Use Go-Jo
instead of shaving cream. Works great and has lanolin sp for a
smooth-soft face after shaving.
I know it sounds stupid but it really works.
Mark E. Willams

LaBomba182 November 18th 04 04:50 PM

Subject: Cleaning Shore Power Cables
From: Maynard G. Krebbs


And GO-JO will give you the best blade shave. Really! Use Go-Jo
instead of shaving cream. Works great and has lanolin sp for a
smooth-soft face after shaving.
I know it sounds stupid but it really works.
Mark E. Willams


I assume you are not recommending using the Go-Jo with grit in it? :-)

Capt. Bill

Calif Bill November 18th 04 07:25 PM


"LaBomba182" wrote in message
...
Subject: Cleaning Shore Power Cables
From: Maynard G. Krebbs


And GO-JO will give you the best blade shave. Really! Use Go-Jo
instead of shaving cream. Works great and has lanolin sp for a
smooth-soft face after shaving.
I know it sounds stupid but it really works.
Mark E. Willams


I assume you are not recommending using the Go-Jo with grit in it? :-)

Capt. Bill


Will sharpen the blade at the same time.



Short Wave Sportfishing November 18th 04 07:46 PM

On Thu, 18 Nov 2004 19:25:22 GMT, "Calif Bill"
wrote:


"LaBomba182" wrote in message
...
Subject: Cleaning Shore Power Cables
From: Maynard G. Krebbs


And GO-JO will give you the best blade shave. Really! Use Go-Jo
instead of shaving cream. Works great and has lanolin sp for a
smooth-soft face after shaving.
I know it sounds stupid but it really works.
Mark E. Willams


I assume you are not recommending using the Go-Jo with grit in it? :-)


Will sharpen the blade at the same time.


Not to mention that minty fresh smell.

Later,

Tom

Maynard G. Krebbs November 19th 04 06:49 AM

On 18 Nov 2004 16:50:46 GMT, (LaBomba182) wrote:

Subject: Cleaning Shore Power Cables
From: Maynard G. Krebbs


And GO-JO will give you the best blade shave. Really! Use Go-Jo
instead of shaving cream. Works great and has lanolin sp for a
smooth-soft face after shaving.
I know it sounds stupid but it really works.
Mark E. Willams


I assume you are not recommending using the Go-Jo with grit in it? :-)

Capt. Bill


You could use the Go-Jo with the grit if you want. I'm not that
tough. Lol

I know, I know. It sounds stupid. It does work very well as a
shaving lube though. :o)
Mark E. Williams

LaBomba182 November 19th 04 10:05 PM

Subject: Cleaning Shore Power Cables
From: Maynard G. Krebbs


I know, I know. It sounds stupid. It does work very well as a
shaving lube though. :o)


Doesn't sound stupid to me.
The best hull cleaner around is blue toilet bowl cleaner. And the best hand
lotion is cream meant for a cow udders. :-)

Capt. Bill

Capt. Bill


All times are GMT +1. The time now is 03:15 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com