BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   28' Scotty Craft (https://www.boatbanter.com/general/1860-28-scotty-craft.html)

Mark Davis November 4th 03 05:20 PM

28' Scotty Craft
 
Has anyone worked on, (heard of) or have any information on Scotty Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I have
found one that is in good condition in need of Power and cabin outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.



Mark Davis November 4th 03 07:12 PM

28' Scotty Craft
 
To clarify, when I say seaworthiness I really meant their hull design, ride
etc. I prefer to have a reasonably dry and stable ride. I have been told
that this boat is a great design, heavy, and dry for its size.

Any information that anyone has on this boat or the manufacture will be
greatly appreciated!!

Thanks.

"Mark Davis" wrote in message
ink.net...
Has anyone worked on, (heard of) or have any information on Scotty Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I have
found one that is in good condition in need of Power and cabin outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the

Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.





F330 GT November 4th 03 10:27 PM

28' Scotty Craft
 
Has anyone worked on, (heard of) or have any information on Scotty Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I have
found one that is in good condition in need of Power and cabin outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.









I used to own one from about 1980 to 1985. I believe you'll find it's actually
a 29'. Very similar in the hull design to the 28 Bertram.

They made an open model day boat and a closed cabin. We had the closed cabin
with a/c. The couch folded up into 2 single beds and the front v-berth was
about the size of a king size bed. Very comfortable. The head had a sink and
shower with hot and cold water. All in all it was a great boat for weekends to
the Bahamas.

The engines were twin 350 chevys with v-drives. That kept the engines down
under the cockpit and out of the way.The v-drives were somewhat problematic in
that you had to keep the u-joints lubricated or you'd lose a drive shaft. I
remember we had to rebuild a v-drive at least once. It was about $350 at the
local machine shop at the time.
The 350 engine is about as inexpensive an engine as you can find. I went from
that to a boat with Detroit 6-71's and I remember we could replace an engine in
the Scotty Craft for about the same price as changing one liner in the diesel.
I always regretted moving up to a larger boat.

The boat was extremely maneuverable. It could spin a perfect circle right in
it's own radius. Very easy to dock for a boat that size.

That boat was the most fun and, I have the most memories of any boat I've
owned. I'd love to have it back. It was also the most fish catching boat I've
ever owned. Sailfish loved that boat. Many a day in the winter we'd be bouncing
around in 6 to 8 foot seas and we'd have multiple hook-ups. I think our record
was 8 sails in one afternoon off Boynton Beach.

The boat is very seaworthy. We kept it in Boynton Beach and that inlet is
notorious. There weren't very many days we couldn't get out.

Let me know more about the one you're looking at. Never know, it could be my
old one. There's not may of them around. any more. And if you have any
questions, I'd be glad to help out if I can.

Barry

Mark Davis November 5th 03 03:00 PM

28' Scotty Craft
 
Thanks so much for a detailed description!

That was everything I wanted to know and then some. I'll let you know how I
come out, the boat right now is in South Fl, so it is always possible its
your old boat.

Thanks again.

Mark.

"F330 GT" wrote in message
...
Has anyone worked on, (heard of) or have any information on Scotty Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I have
found one that is in good condition in need of Power and cabin outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the

Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.









I used to own one from about 1980 to 1985. I believe you'll find it's

actually
a 29'. Very similar in the hull design to the 28 Bertram.

They made an open model day boat and a closed cabin. We had the closed

cabin
with a/c. The couch folded up into 2 single beds and the front v-berth was
about the size of a king size bed. Very comfortable. The head had a sink

and
shower with hot and cold water. All in all it was a great boat for

weekends to
the Bahamas.

The engines were twin 350 chevys with v-drives. That kept the engines down
under the cockpit and out of the way.The v-drives were somewhat

problematic in
that you had to keep the u-joints lubricated or you'd lose a drive shaft.

I
remember we had to rebuild a v-drive at least once. It was about $350 at

the
local machine shop at the time.
The 350 engine is about as inexpensive an engine as you can find. I went

from
that to a boat with Detroit 6-71's and I remember we could replace an

engine in
the Scotty Craft for about the same price as changing one liner in the

diesel.
I always regretted moving up to a larger boat.

The boat was extremely maneuverable. It could spin a perfect circle right

in
it's own radius. Very easy to dock for a boat that size.

That boat was the most fun and, I have the most memories of any boat I've
owned. I'd love to have it back. It was also the most fish catching boat

I've
ever owned. Sailfish loved that boat. Many a day in the winter we'd be

bouncing
around in 6 to 8 foot seas and we'd have multiple hook-ups. I think our

record
was 8 sails in one afternoon off Boynton Beach.

The boat is very seaworthy. We kept it in Boynton Beach and that inlet is
notorious. There weren't very many days we couldn't get out.

Let me know more about the one you're looking at. Never know, it could be

my
old one. There's not may of them around. any more. And if you have any
questions, I'd be glad to help out if I can.

Barry




Paul Schilter November 5th 03 09:40 PM

28' Scotty Craft
 
F330,
I'd dove with Splashdown divers in Boynton Beach, if it's that inlet
that has a bridge you go under and a bunch of fishermen on the wall, ya it's
an interesting ride.
Paul

"F330 GT" wrote in message
...
deleted
That boat was the most fun and, I have the most memories of any boat I've
owned. I'd love to have it back. It was also the most fish catching boat

I've
ever owned. Sailfish loved that boat. Many a day in the winter we'd be

bouncing
around in 6 to 8 foot seas and we'd have multiple hook-ups. I think our

record
was 8 sails in one afternoon off Boynton Beach.

The boat is very seaworthy. We kept it in Boynton Beach and that inlet is
notorious. There weren't very many days we couldn't get out.

Let me know more about the one you're looking at. Never know, it could be

my
old one. There's not may of them around. any more. And if you have any
questions, I'd be glad to help out if I can.

Barry




F330 GT November 5th 03 10:03 PM

28' Scotty Craft
 
F330,
I'd dove with Splashdown divers in Boynton Beach, if it's that inlet
that has a bridge you go under and a bunch of fishermen on the wall, ya it's
an interesting ride.
Paul


That's the one. Tides rip through that skinny little inlet. A good strong
outgoing tide with a strong NE winter wind and you come out the inlet and face
6 to 8 foot rollers coming over the shifting sand bar. Local knowledge is a
must. They lose a lot of boats in that inlet.


Barry

F330 GT November 5th 03 10:05 PM

28' Scotty Craft
 
Thanks so much for a detailed description!

That was everything I wanted to know and then some. I'll let you know how I
come out, the boat right now is in South Fl, so it is always possible its
your old boat.

Thanks again.

Mark.

"F330 GT" wrote in message
...
Has anyone worked on, (heard of) or have any information on Scotty Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I have
found one that is in good condition in need of Power and cabin outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the

Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.









I used to own one from about 1980 to 1985. I believe you'll find it's

actually
a 29'. Very similar in the hull design to the 28 Bertram.

They made an open model day boat and a closed cabin. We had the closed

cabin
with a/c. The couch folded up into 2 single beds and the front v-berth was
about the size of a king size bed. Very comfortable. The head had a sink

and
shower with hot and cold water. All in all it was a great boat for

weekends to
the Bahamas.

The engines were twin 350 chevys with v-drives. That kept the engines down
under the cockpit and out of the way.The v-drives were somewhat

problematic in
that you had to keep the u-joints lubricated or you'd lose a drive shaft.

I
remember we had to rebuild a v-drive at least once. It was about $350 at

the
local machine shop at the time.
The 350 engine is about as inexpensive an engine as you can find. I went

from
that to a boat with Detroit 6-71's and I remember we could replace an

engine in
the Scotty Craft for about the same price as changing one liner in the

diesel.
I always regretted moving up to a larger boat.

The boat was extremely maneuverable. It could spin a perfect circle right

in
it's own radius. Very easy to dock for a boat that size.

That boat was the most fun and, I have the most memories of any boat I've
owned. I'd love to have it back. It was also the most fish catching boat

I've
ever owned. Sailfish loved that boat. Many a day in the winter we'd be

bouncing
around in 6 to 8 foot seas and we'd have multiple hook-ups. I think our

record
was 8 sails in one afternoon off Boynton Beach.

The boat is very seaworthy. We kept it in Boynton Beach and that inlet is
notorious. There weren't very many days we couldn't get out.

Let me know more about the one you're looking at. Never know, it could be

my
old one. There's not may of them around. any more. And if you have any
questions, I'd be glad to help out if I can.

Barry




We sold it to a guy from Miami and I understand he did some nice cosmetic
upgrades. The name back then was "Getaway II". Might still have the same name.


Barry



Mark Davis November 6th 03 04:03 AM

28' Scotty Craft
 
I am heading down tomorrow to do a final inspection and will let you know
what I find. Thanks again for all the info.

Mark.

"F330 GT" wrote in message
...
Thanks so much for a detailed description!

That was everything I wanted to know and then some. I'll let you know

how I
come out, the boat right now is in South Fl, so it is always possible its
your old boat.

Thanks again.

Mark.

"F330 GT" wrote in message
...
Has anyone worked on, (heard of) or have any information on Scotty

Craft
Boats? From what I can tell they are mostly pre-1970 boats, but I

have
found one that is in good condition in need of Power and cabin

outfitting
and am interested.

My only concern is its seaworthness. One person compared it to the

Bertram
Moppie, is this a fair compairison?

Thanks in advance!!!

Mark.









I used to own one from about 1980 to 1985. I believe you'll find it's

actually
a 29'. Very similar in the hull design to the 28 Bertram.

They made an open model day boat and a closed cabin. We had the closed

cabin
with a/c. The couch folded up into 2 single beds and the front v-berth

was
about the size of a king size bed. Very comfortable. The head had a

sink
and
shower with hot and cold water. All in all it was a great boat for

weekends to
the Bahamas.

The engines were twin 350 chevys with v-drives. That kept the engines

down
under the cockpit and out of the way.The v-drives were somewhat

problematic in
that you had to keep the u-joints lubricated or you'd lose a drive

shaft.
I
remember we had to rebuild a v-drive at least once. It was about $350

at
the
local machine shop at the time.
The 350 engine is about as inexpensive an engine as you can find. I

went
from
that to a boat with Detroit 6-71's and I remember we could replace an

engine in
the Scotty Craft for about the same price as changing one liner in the

diesel.
I always regretted moving up to a larger boat.

The boat was extremely maneuverable. It could spin a perfect circle

right
in
it's own radius. Very easy to dock for a boat that size.

That boat was the most fun and, I have the most memories of any boat

I've
owned. I'd love to have it back. It was also the most fish catching

boat
I've
ever owned. Sailfish loved that boat. Many a day in the winter we'd be

bouncing
around in 6 to 8 foot seas and we'd have multiple hook-ups. I think our

record
was 8 sails in one afternoon off Boynton Beach.

The boat is very seaworthy. We kept it in Boynton Beach and that inlet

is
notorious. There weren't very many days we couldn't get out.

Let me know more about the one you're looking at. Never know, it could

be
my
old one. There's not may of them around. any more. And if you have any
questions, I'd be glad to help out if I can.

Barry




We sold it to a guy from Miami and I understand he did some nice cosmetic
upgrades. The name back then was "Getaway II". Might still have the same

name.


Barry






All times are GMT +1. The time now is 10:41 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com