Another Day, Another Build (continued)
 

Keyser Soze Wrote in message:
On 10/27/18 10:43 PM, wrote: On Sat, 27 Oct 2018 18:59:25 -0400, John H. wrote: On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote: On 10/27/18 3:19 PM, wrote: On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze wrote: On 10/24/18 2:35 PM, wrote: On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze wrote: Well, I assembled the upper for my new .308, including checking the headspace with a borrowed "go/no go" kit and pinning the gas tube/block assembly. Going to drop it off at my buddy the gunsmith's place today for him to check over my work. Compared to the "bare, naked" lower, assembling an upper is pretty easy. If the weather sucks this weekend, I'll start on the lower. === If you really want to challenge yourself and impress your gunsmith friend, build it with an 80% lower. I don't have the particular skills, drill press and other tools needed to finish an 80% lower. Besides, the gunsmith buddy is already impressed with me, because I tutored his kid for three months for free and helped the kid go from the equivalent of a C- in English to a solid B and to raise his score more than 100 points on the SAT Reading Test and Writing and Language Test. I also helped him start to lose his southern redneck speaking patois and use more standard English. Hopefully, he will continue developing his skills and put them to good use in college. === If you want to engage in manly pursuits with manly weapons, you should first acquire some manly tools and skills. --- This email has been checked for viruses by AVG. http://www.avg.com My "manly skills" are sufficient for the task I've described. I have no need for a jig or drill press to build an 80% lower, and I don't want to waste a couple of weeks spraying, heating and curing a durable finish on the aluminum parts. My goal was to teach myself the innards of a nice rifle and then shoot it. I'll take your advice for what I think it is worth, which is, of course, nothing. "It's always funny when a bankster makes ad hominem remarks." It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'. === Especially when we all know that the hominem in question is nothing but a pussy at heart. I'm not sure a bankster's "research" to redline a neighborhood qualifies as toughness...it's more like racism. Isn't that what you did, W'hiner?

Keep him in the dark Wayne. He's just phishing for his dossiers.
--
x

Another Day, Another Build (continued)
 

On Sun, 28 Oct 2018 09:34:29 -0400, Keyser Soze wrote:

On 10/28/18 9:20 AM, justan wrote:

You're right. Fat Harry is a pussy, heart and soul.



There are *many* women (and men) who can outshoot me. But that seems to
be an issue with you right-wing trashmeisters, not me.

Yet you were the guy claiming he could outshoot all those Prince George's County cops.

On the other hand, or even offhand,

Is that part of your 'reach-around' repertoire?

JustanAsshole, I'm certain I can
outshoot you with generally available rifles or handguns, and at
whatever distance you choose. With the .308 rifle I just sold, I was
shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I
am now assembling, I hope to bring that down, with practice, to under 1"
groups at 100 yards off a bipod. I should have the new lower assembled
by the middle of week. I'll post some photos to give you a woodie you
probably haven't seen for a decade.

Now you're getting into that ol' back-patting mold again!


BTW, do you think you can learn to post without the dozens of and
suchlike crap that accompanies the diarrhea you present us here?

Gosh, do your 'aptitudes' not include reading?

Another Day, Another Build (continued)
 

On Sun, 28 Oct 2018 10:22:25 -0400, Keyser Soze wrote:

On 10/28/18 10:13 AM, justan wrote:
Keyser Soze Wrote in message:
On 10/28/18 9:20 AM, justan wrote: You're right. Fat Harry is a pussy, heart and soul. There are *many* women (and men) who can outshoot me. But that seems to be an issue with you right-wing trashmeisters, not me.On the other hand, or even offhand, JustanAsshole, I'm certain I can outshoot you with generally available rifles or handguns, and at whatever distance you choose. With the .308 rifle I just sold, I was shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I am now assembling, I hope to bring that down, with practice, to under 1" groups at 100 yards off a bipod. I should have the new lower assembled by the middle of week. I'll post some photos to give you a woodie you probably haven't seen for a decade.BTW, do you think you can learn to post without the dozens of and suchlike crap that accompanies the diarrhea you present us here?

Oooo! You are so manly.
I have no idea as to why you continue ro try to impress me and others.
You are certain of many things that are wrong and pure bull****.
You don't know if I can shoot, or even if l own a gun.
In fact you don't seem to know much of anything that really matters.


There's really nothing about you worth knowing.

Then why the continuous whining about his 'anonymity', eh Krausee?

Another Day, Another Build (continued)
 

On Sunday, October 28, 2018 at 10:13:05 AM UTC-4, justan wrote:
Keyser Soze Wrote in message:
On 10/28/18 9:20 AM, justan wrote: You're right. Fat Harry is a pussy, heart and soul. There are *many* women (and men) who can outshoot me. But that seems to be an issue with you right-wing trashmeisters, not me.On the other hand, or even offhand, JustanAsshole, I'm certain I can outshoot you with generally available rifles or handguns, and at whatever distance you choose. With the .308 rifle I just sold, I was shooting under 2" groups at 100 yards off a bipod. With the .308 rifle I am now assembling, I hope to bring that down, with practice, to under 1" groups at 100 yards off a bipod. I should have the new lower assembled by the middle of week. I'll post some photos to give you a woodie you probably haven't seen for a decade.BTW, do you think you can learn to post without the dozens of and suchlike crap that accompanies the diarrhea you present us here?

Oooo! You are so manly.
I have no idea as to why you continue ro try to impress me and others.
You are certain of many things that are wrong and pure bull****.
You don't know if I can shoot, or even if l own a gun.
In fact you don't seem to know much of anything that really matters.
--
x

It takes about 30 minutes to assemble a lower. Why would it take FH until the middle of the week?

Another Day, Another Build (continued)
 

On Sun, 28 Oct 2018 09:57:33 -0400, Keyser Soze
wrote:

On 10/27/18 10:43 PM, wrote:
On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.



I'm not sure a bankster's "research" to redline a neighborhood
qualifies as toughness...it's more like racism. Isn't that what you
did, W'hiner?

===

Not even close but believe what you want. It matters not to me.

I do know however, that if you borrow money from a bank and fail to
pay it back, they will make your life miserable. Isn't that what
happened to you, 'Airree? You should try to get your credit score up
to at least your IQ level, preferably higher. And maybe clean up some
of those outstanding tax liens.

Another Day, Another Build (continued)
 

On 10/28/18 11:36 AM, wrote:
On Sun, 28 Oct 2018 09:57:33 -0400, Keyser Soze
wrote:

On 10/27/18 10:43 PM, wrote:
On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.



I'm not sure a bankster's "research" to redline a neighborhood
qualifies as toughness...it's more like racism. Isn't that what you
did, W'hiner?

===

Not even close but believe what you want. It matters not to me.

I do know however, that if you borrow money from a bank and fail to
pay it back, they will make your life miserable. Isn't that what
happened to you, 'Airree? You should try to get your credit score up
to at least your IQ level, preferably higher. And maybe clean up some
of those outstanding tax liens.


Once again, I have had the *same* good relationship with my current bank
and its several predecessors for decades. It's been such a long time,
I'm not even sure I can remember the name of the original bank before it
was "flipped" several times to new corporate whores.

Oh, btw, how many modern sporting rifles have you assembled from 80%
lowers. I'd bet...none.

Another Day, Another Build (continued)
 

Keyser Soze wrote:
On 10/28/18 11:36 AM, wrote:
On Sun, 28 Oct 2018 09:57:33 -0400, Keyser Soze
wrote:

On 10/27/18 10:43 PM, wrote:
On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more
bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.



I'm not sure a bankster's "research" to redline a neighborhood
qualifies as toughness...it's more like racism. Isn't that what you
did, W'hiner?

===

Not even close but believe what you want. It matters not to me.

I do know however, that if you borrow money from a bank and fail to
pay it back, they will make your life miserable. Isn't that what
happened to you, 'Airree? You should try to get your credit score up
to at least your IQ level, preferably higher. And maybe clean up some
of those outstanding tax liens.


Once again, I have had the *same* good relationship with my current bank
and its several predecessors for decades. It's been such a long time,
I'm not even sure I can remember the name of the original bank before it
was "flipped" several times to new corporate whores.

Oh, btw, how many modern sporting rifles have you assembled from 80%
lowers. I'd bet...none.


Maybe, most of us are not the gun nuts you are. So why build a rifle?

Another Day, Another Build (continued)
 

On Sunday, October 28, 2018 at 11:42:17 AM UTC-4, Keyser Soze wrote:
On 10/28/18 11:36 AM, wrote:

I do know however, that if you borrow money from a bank and fail to
pay it back, they will make your life miserable. Isn't that what
happened to you, 'Airree? You should try to get your credit score up
to at least your IQ level, preferably higher. And maybe clean up some
of those outstanding tax liens.


Once again, I have had the *same* good relationship with my current bank
and its several predecessors for decades.

So what lending institution(s) did you default on? That it was not the bank you have your checking account with is meaningless.

Another Day, Another Build (continued)
 

On 10/28/18 12:00 PM, Bill wrote:
Keyser Soze wrote:
On 10/28/18 11:36 AM, wrote:
On Sun, 28 Oct 2018 09:57:33 -0400, Keyser Soze
wrote:

On 10/27/18 10:43 PM, wrote:
On Sat, 27 Oct 2018 18:59:25 -0400, John H.
wrote:

On Sat, 27 Oct 2018 18:50:18 -0400, Keyser Soze wrote:

On 10/27/18 3:19 PM, wrote:
On Wed, 24 Oct 2018 16:12:09 -0400, Keyser Soze
wrote:

On 10/24/18 2:35 PM, wrote:
On Wed, 24 Oct 2018 13:43:36 -0400, Keyser Soze
wrote:

Well, I assembled the upper for my new .308, including checking the
headspace with a borrowed "go/no go" kit and pinning the gas tube/block
assembly. Going to drop it off at my buddy the gunsmith's place today
for him to check over my work. Compared to the "bare, naked" lower,
assembling an upper is pretty easy. If the weather sucks this
weekend, I'll start on the lower.


===

If you really want to challenge yourself and impress your gunsmith
friend, build it with an 80% lower.


I don't have the particular skills, drill press and other tools needed
to finish an 80% lower. Besides, the gunsmith buddy is already
impressed with me, because I tutored his kid for three months for free
and helped the kid go from the equivalent of a C- in English to a solid
B and to raise his score more than 100 points on the SAT Reading Test
and Writing and Language Test. I also helped him start to lose his
southern redneck speaking patois and use more standard English.
Hopefully, he will continue developing his skills and put them to
good use in college.


===

If you want to engage in manly pursuits with manly weapons, you should
first acquire some manly tools and skills.

---
This email has been checked for viruses by AVG.
http://www.avg.com


My "manly skills" are sufficient for the task I've described. I have no
need for a jig or drill press to build an 80% lower, and I don't want to
waste a couple of weeks spraying, heating and curing a durable finish
on the aluminum parts. My goal was to teach myself the innards of a
nice rifle and then shoot it. I'll take your advice for what I think
it is worth, which is, of course, nothing.


"It's always funny when a bankster makes ad hominem remarks."

It's even funnier when the hominem in question responds with more
bull**** to show his 'manliness'.

===

Especially when we all know that the hominem in question is nothing
but a pussy at heart.



I'm not sure a bankster's "research" to redline a neighborhood
qualifies as toughness...it's more like racism. Isn't that what you
did, W'hiner?

===

Not even close but believe what you want. It matters not to me.

I do know however, that if you borrow money from a bank and fail to
pay it back, they will make your life miserable. Isn't that what
happened to you, 'Airree? You should try to get your credit score up
to at least your IQ level, preferably higher. And maybe clean up some
of those outstanding tax liens.


Once again, I have had the *same* good relationship with my current bank
and its several predecessors for decades. It's been such a long time,
I'm not even sure I can remember the name of the original bank before it
was "flipped" several times to new corporate whores.

Oh, btw, how many modern sporting rifles have you assembled from 80%
lowers. I'd bet...none.


Maybe, most of us are not the gun nuts you are. So why build a rifle?



Well, if you want to clean and maintain a modern sporting rifle
properly, it helps to know how it all goes together, and I think
building one is a good teacher. Many of the pieces'n'parts may be
upgraded if you want.

Another Day, Another Build (continued)
 

On Sun, 28 Oct 2018 11:01:27 -0400, John H.
wrote:

Yet you were the guy claiming he could outshoot all those Prince George's County cops

From my experience street cops are not that good a shot. You only have
to look at their real life performance. They seem to hit the target
with 10% or fewer shots fired and that is usually at "belly gun"
range.
My cop buddies say they are not much better on the range.