YouTube - Building the Workboat Skiff - Episode 36
 

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.

YouTube - Building the Workboat Skiff - Episode 36
 

8:58
- show quoted text -
===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.
.....

Cadillac of work skiffs? Maybe if he can squeeze twin Volvo diesels in it...😜

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/14/2017 9:58 AM, wrote:
On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.



If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 08:26:14 -0400,
wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

It looks like he is overdue for a new drill or at least a sharpening.
That dude was smoking a might.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

I had my hand on a nice one at an auction in Ft Myers that ended up
going for a little over $100 but I really did not have a place for it
so I did not bid. I could have had a great deal from Henc on his 1
meter bed metal lathe but I had the same problem.
I would have made room for the CnC but he wasn't selling it.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 09:58:12 -0400,
wrote:

This boat is going to end up being
the Cadillac of all work skiffs.

More like the Morgan of work skiffs. Too much wood for me. ;-)

Work boats are aluminum.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 09:58:12 -0400, wrote:

On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.

I knew he was counterboring the inside hole, but thought he'd be using nuts and fender washers on
the back of the transom. That's what I'd do anyway.

YouTube - Building the Workboat Skiff - Episode 36
 

wrote:
On Fri, 14 Apr 2017 09:58:12 -0400,
wrote:

This boat is going to end up being
the Cadillac of all work skiffs.

More like the Morgan of work skiffs. Too much wood for me. ;-)

Work boats are aluminum.


Too heavy, too fancy, low transom, but a pretty skiff.

--
Posted with my iPhone 7+.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.

I guess you don't have a table saw ;-)

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

On 4/14/2017 9:58 AM, wrote:
On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.



If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.


===

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 14:22:30 -0400,
wrote:

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.

I have been banged up by my drill press as bad as anything when things
work their way out of the vice and start spinning around.
http://gfretwell.com/ftp/finger%20wound.jpg

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/14/2017 12:07 PM, wrote:
On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.

I guess you don't have a table saw ;-)


I've used both (although not like that bandsaw) but the speed in which
he cut and cleared the cuts made me nervous.

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/14/2017 2:22 PM, wrote:
On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

On 4/14/2017 9:58 AM, wrote:
On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of scrap to the back of the transom
to keep it from splitting out when the bit came through. I was surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.



If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.


===

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.



I think the worst powered tool I've used was a large, Milwaukee hammer
drill motor. I was drilling holes in the framing of a shed I built to
run romex and the bit got stuck. The drill motor had the horizontal side
handle on it and the damn thing spun around and smashed it into my
wrist. Thought for sure it was broken.

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/14/2017 3:15 PM, wrote:
On Fri, 14 Apr 2017 14:22:30 -0400,
wrote:

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.

I have been banged up by my drill press as bad as anything when things
work their way out of the vice and start spinning around.
http://gfretwell.com/ftp/finger%20wound.jpg


Yup. Done that too. When I had the business I used to like to
occasionally use some of the machine shop equipment for "home projects".
Always got the machinists nervous when they saw me walking out in the
shop with a hunk of metal in my hand. They usually just asked, "what do
you want me to do to it" and took it away from me.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 15:22:44 -0400, "Mr. Luddite"
wrote:


I think the worst powered tool I've used was a large, Milwaukee hammer
drill motor. I was drilling holes in the framing of a shed I built to
run romex and the bit got stuck. The drill motor had the horizontal side
handle on it and the damn thing spun around and smashed it into my
wrist. Thought for sure it was broken.

I was thrown off a ladder once when my big drill jammed a 3/4" ship
auger but no real injury. I know how to fall ;-)

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 15:15:47 -0400, wrote:

On Fri, 14 Apr 2017 14:22:30 -0400,
wrote:

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.

I have been banged up by my drill press as bad as anything when things
work their way out of the vice and start spinning around.
http://gfretwell.com/ftp/finger%20wound.jpg

===

Nasty!

I have a fairly large cross slide vice securely clamped to the table
of my drill press just to prevent that sort of thing. I had a few
close calls prior however. The cross slide vice also creates a big
improvement in functionality, allowing the drill press to be used as
an ersatz milling machine for small work.

https://www.mscdirect.com/product/details/63496012

YouTube - Building the Workboat Skiff - Episode 36
 

wrote:
On Fri, 14 Apr 2017 08:26:14 -0400,
wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

It looks like he is overdue for a new drill or at least a sharpening.
That dude was smoking a might.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

I had my hand on a nice one at an auction in Ft Myers that ended up
going for a little over $100 but I really did not have a place for it
so I did not bid. I could have had a great deal from Henc on his 1
meter bed metal lathe but I had the same problem.
I would have made room for the CnC but he wasn't selling it.



Build a pole barn on the property.

YouTube - Building the Workboat Skiff - Episode 36
 

Mr. Luddite wrote:
On 4/14/2017 2:22 PM, wrote:
On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

On 4/14/2017 9:58 AM, wrote:
On Fri, 14 Apr 2017 09:13:15 -0400, Poco Deplorevole
wrote:

On Fri, 14 Apr 2017 08:26:14 -0400, wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

Wow. The guy has some great tips. I would have clamped a piece of
scrap to the back of the transom
to keep it from splitting out when the bit came through. I was
surprised that he didn't do that.

===

I agree but since he was going to counterbore the hole, some small
splitting wouldn't have mattered. This boat is going to end up being
the Cadillac of all work skiffs.



If I ever used that bandsaw I'd have 7 or 8 fingers left when the boat
was done.


===

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.



I think the worst powered tool I've used was a large, Milwaukee hammer
drill motor. I was drilling holes in the framing of a shed I built to
run romex and the bit got stuck. The drill motor had the horizontal side
handle on it and the damn thing spun around and smashed it into my
wrist. Thought for sure it was broken.


At NCR we had a 1/4" Milwaukee drill. Was the same size and power as a
large 1/2" drill. When it got stuck, just let go as it was going to rip
out of your hands anyway.

YouTube - Building the Workboat Skiff - Episode 36
 

Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.

YouTube - Building the Workboat Skiff - Episode 36
 

True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge,
especially when using spade bits.
When drilling holes through framing lumber I use my long auger type
bits...like the electricians do.


Drilling steel.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 16:56:42 -0400,
wrote:

On Fri, 14 Apr 2017 15:15:47 -0400, wrote:

On Fri, 14 Apr 2017 14:22:30 -0400,
wrote:

On Fri, 14 Apr 2017 11:16:32 -0400, "Mr. Luddite"
wrote:

Bandsaws are relatively well behaved compared to table saws, jointers,
routers, shapers, etc. You do have to watch where your fingers are of
course but I've never had a bandsaw violently pick up a piece of wood
and fling it the way some of the other tools will.

I have been banged up by my drill press as bad as anything when things
work their way out of the vice and start spinning around.
http://gfretwell.com/ftp/finger%20wound.jpg

===

Nasty!

I have a fairly large cross slide vice securely clamped to the table
of my drill press just to prevent that sort of thing. I had a few
close calls prior however. The cross slide vice also creates a big
improvement in functionality, allowing the drill press to be used as
an ersatz milling machine for small work.

https://www.mscdirect.com/product/details/63496012

Mine is over a shop vice but the work piece just got loose. ****
happens I guess

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 22:04:48 -0000 (UTC), Bill
wrote:

wrote:
On Fri, 14 Apr 2017 08:26:14 -0400,
wrote:

For those of you who have been following this fascinating series, the
project is nearing completion. In this episode Lou offers up some
tips on how to properly align drilled holes in thick material.

https://www.youtube.com/watch?v=TvTh0SDHvZQ&feature=youtu.be

Lou announces that he plans to sell the completed boat on EBAY. It
will be interesting to see what it goes for.

It looks like he is overdue for a new drill or at least a sharpening.
That dude was smoking a might.

I wish I had a monster band saw like that one he uses but it's not
going to happen.

I had my hand on a nice one at an auction in Ft Myers that ended up
going for a little over $100 but I really did not have a place for it
so I did not bid. I could have had a great deal from Henc on his 1
meter bed metal lathe but I had the same problem.
I would have made room for the CnC but he wasn't selling it.



Build a pole barn on the property.

That is the problem for a tiki bar builder like me. I am running out
of property. That is why I tried to buy the house next door. I was
going to make it a shop. I am still kicking myself for not coming up
with the extra 12 grand (last bid) but I am not sure the bid was going
to stop there and it is really a tear down.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 18:55:35 -0700 (PDT), True North
wrote:

Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.

When you are up on a ladder, your wrist is not the issue. The only
issue then is figuring out soon enough that this is not going to end
well and turning a fall into a jump.

YouTube - Building the Workboat Skiff - Episode 36
 

On Fri, 14 Apr 2017 18:55:35 -0700 (PDT), True North wrote:

Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.

Does pushing mops and scrubbing toilets build up your wrist muscles, Donnee? Or do you do other
exercises for that?

This is another example of reaping what you sow. There was no need for the first sentence of your
post.

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/14/2017 9:55 PM, True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.



In my case with the Milwaukee drill, that's exactly what I was doing
except it had a 1/2 inch chuck. I was using an auger bit. It just
jammed in one of the holes and the drill spun around and nearly broke my
wrist.

YouTube - Building the Workboat Skiff - Episode 36
 

On Sat, 15 Apr 2017 07:33:18 -0400, "Mr. Luddite"
wrote:

On 4/14/2017 9:55 PM, True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.



In my case with the Milwaukee drill, that's exactly what I was doing
except it had a 1/2 inch chuck. I was using an auger bit. It just
jammed in one of the holes and the drill spun around and nearly broke my
wrist.


===

I have one of those half inch Milwaukee hammer drills also. Great
tool but an awesome amount of torque transmitted back when, not if, it
jams up. I had it happen recently when drilling my concrete pool deck
with a 1 1/8 masonary bit. My problem was not fully tightening the
forward handle, allowing the whole tool to totate inside the
attachment ring. I was lucky not to get banged up worse than I did.

YouTube - Building the Workboat Skiff - Episode 36
 

On Sat, 15 Apr 2017 08:28:47 -0400,
wrote:

On Sat, 15 Apr 2017 07:33:18 -0400, "Mr. Luddite"
wrote:

On 4/14/2017 9:55 PM, True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.



In my case with the Milwaukee drill, that's exactly what I was doing
except it had a 1/2 inch chuck. I was using an auger bit. It just
jammed in one of the holes and the drill spun around and nearly broke my
wrist.


===

I have one of those half inch Milwaukee hammer drills also. Great
tool but an awesome amount of torque transmitted back when, not if, it
jams up. I had it happen recently when drilling my concrete pool deck
with a 1 1/8 masonary bit. My problem was not fully tightening the
forward handle, allowing the whole tool to totate inside the
attachment ring. I was lucky not to get banged up worse than I did.

I have an assortment of 1/2" drills I have accumulated over the years.
Some, like the hammer drills go pretty fast. I also have two that go
slow but will not stall. Those are the ones I use with ship augers.
Wrists have little to do with it. If that drill jams, it will lift me
off the ground. You really have to stand in a way that you can absorb
a half revolution or more that it turns after you get off the trigger.

YouTube - Building the Workboat Skiff - Episode 36
 

On Friday, April 14, 2017 at 6:55:37 PM UTC-7, True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.

Why on earth would you predrill a hole for a spade bit? Defeats the purpose of using a spade bit. Thats just plain stupid.

YouTube - Building the Workboat Skiff - Episode 36
 

On Mon, 17 Apr 2017 11:19:38 -0700 (PDT), wrote:

On Friday, April 14, 2017 at 6:55:37 PM UTC-7, True North wrote:
Y'all sure are a weak wristed bunch.
I only use half inch drills but drill smaller holes and then enlarge, especially when using spade bits.
When drilling holes through framing lumber I use my long auger type bits...like the electricians do.

Why on earth would you predrill a hole for a spade bit? Defeats the purpose of using a spade bit. Thats just plain stupid.

If you predrill the hole, then the lead tip can bounce around and totally dick up the hole you're
trying to drill.

Remember, you're talking to a retired janitor.

YouTube - Building the Workboat Skiff - Episode 36
 

The John flushes his head....

- show quoted text -
"If you predrill the hole, then the lead tip can bounce around and totally dick up the hole you're
trying to drill.

Remember, you're talking to a retired janitor."



Sez the spaz who wanted to use 2 stroke oil in a 4 stroke engine.

YouTube - Building the Workboat Skiff - Episode 36
 

On Mon, 17 Apr 2017 12:11:32 -0700 (PDT), True North wrote:

The John flushes his head....

- show quoted text -
"If you predrill the hole, then the lead tip can bounce around and totally dick up the hole you're
trying to drill.

Remember, you're talking to a retired janitor."



Sez the spaz who wanted to use 2 stroke oil in a 4 stroke engine.

I don't have to make up lies for my story, Donnee!

I notice you deleted your comment!

YouTube - Building the Workboat Skiff - Episode 36
 

I deleted nothing, JohnnyMop.

YouTube - Building the Workboat Skiff - Episode 36
 

On 4/17/17 4:45 PM, True North wrote:
I deleted nothing, JohnnyMop.



The only worthwhile activity with Johnny is to **** on his head.

YouTube - Building the Workboat Skiff - Episode 36
 

On Monday, April 17, 2017 at 4:45:09 PM UTC-4, True North wrote:
I deleted nothing, JohnnyMop.

In this post you deleted everything but your reply.

Oh, I forgot, it's the fault of the POS you post from.