On 1/23/2016 5:37 AM, Mr. Luddite wrote:
On 1/23/2016 1:02 AM, wrote:
On Fri, 22 Jan 2016 19:38:14 -0800 (PST), True North
wrote:

Ditzy Dan spews...

"I would hate to be the guy with that job!"


Gee...don't y'all think they might have a mechanical machine to do it?

You don't need a live round to drop test a gun. A blank or just an
empty primed case will work just fine. (the latter being the easiest
and cheapest).
I also doubt this is a machine. I imagine there is a protocol they
follow (height, surface, angle etc). They just have some government
apparatchik sitting on a stool dropping guns all day.



Just a clarification ... virtually *all* handguns since the 1940's have
some sort of transfer block or other mechanism that prevents the hammer
from striking the firing pin unless the trigger is pulled. The drop
test required in Massachusetts is intended to ensure the mechanism works
as advertised.


I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.

5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.
--------

Polishing triggers. I never saw much future in stuff like that.

On Fri, 22 Jan 2016 19:54:12 -0500, Keyser Söze wrote:

On 1/22/16 2:25 PM, John H. wrote:
On Fri, 22 Jan 2016 13:34:36 -0500, Keyser Söze wrote:

On 1/22/16 12:23 PM, wrote:
On Fri, 22 Jan 2016 11:22:40 -0500, Keyser Söze
wrote:


Intoxicated conceal-carry gun owner shot and critically wounded a woman
during Benghazi movie in WA

How did he get to the movie?
Statistically that guy was a lot more dangerous driving drunk than
dropping his gun ... but that is not "news".


You seem to have an apologetica ready for any sort of gun nonsense.

You seem to spend a lot of time searching for gun nonsense. Why? Are you trying to
show what a 'sensiible' person you are?
--

Ban idiots, not guns!


Gun nonsense? Well, that says a lot about you.

I don't suppose you recall using the phrase, eh?

I'm trying hard not to call you some names you know you deserve.
--

Ban idiots, not guns!

On Fri, 22 Jan 2016 19:38:14 -0800 (PST), True North wrote:

Ditzy Dan spews...

"I would hate to be the guy with that job!"


Gee...don't y'all think they might have a mechanical machine to do it?

No, they use a drunk. How else could they replicate Harry's scenario.
--

Ban idiots, not guns!

On Sat, 23 Jan 2016 06:26:02 -0500, Justan Olphart
wrote:

On 1/23/2016 5:37 AM, Mr. Luddite wrote:
On 1/23/2016 1:02 AM, wrote:
On Fri, 22 Jan 2016 19:38:14 -0800 (PST), True North
wrote:

Ditzy Dan spews...

"I would hate to be the guy with that job!"


Gee...don't y'all think they might have a mechanical machine to do it?

You don't need a live round to drop test a gun. A blank or just an
empty primed case will work just fine. (the latter being the easiest
and cheapest).
I also doubt this is a machine. I imagine there is a protocol they
follow (height, surface, angle etc). They just have some government
apparatchik sitting on a stool dropping guns all day.



Just a clarification ... virtually *all* handguns since the 1940's have
some sort of transfer block or other mechanism that prevents the hammer
from striking the firing pin unless the trigger is pulled. The drop
test required in Massachusetts is intended to ensure the mechanism works
as advertised.


I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.

Cowboy action shooters have single action pistols and they usually
hold the trigger all the way down and thumb the hammer to shoot. I am
not sure what you would have to do with it. The only way those old
Colt design pistols were safe was with the hammer down over an empty
chamber anyway. It is a little safer in the half cock position but not
much. I think my Frontier Scout is drop safe but I still only load 5
most of the time

On 1/23/2016 12:27 PM, Keyser Soze wrote:
Tim Wrote in message:
5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.
--------

Polishing triggers. I never saw much future in stuff like that.


I never have a round chambered unless I am about to fire 5th
edition gun. Four of the five firearms I use have had trigger
jobs. They won't fire without a round in the chamber or if
dropped. Flajim is just playing his usual role as usenet
asshole.

Are you assuming I was talking about you and the CZ you destroyed?

On Sat, 23 Jan 2016 12:27:22 -0500 (EST), Keyser Soze wrote:

Tim Wrote in message:
5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.
--------

Polishing triggers. I never saw much future in stuff like that.


I never have a round chambered unless I am about to fire 5th
edition gun. Four of the five firearms I use have had trigger
jobs. They won't fire without a round in the chamber or if
dropped. Flajim is just playing his usual role as usenet
asshole.

Are you confusing hand jobs with trigger jobs? And, FlaJim doesn't even come close to
being a 'usenet asshole'.

Shame on you, especially as you know better...being an expert on usenet assholishness
and all.

How're the owls doing in all this snow?
--

Ban idiots, not guns!

On 1/23/16 12:50 PM, John H. wrote:
On Sat, 23 Jan 2016 12:27:22 -0500 (EST), Keyser Soze wrote:

Tim Wrote in message:
5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.
--------

Polishing triggers. I never saw much future in stuff like that.


I never have a round chambered unless I am about to fire 5th
edition gun. Four of the five firearms I use have had trigger
jobs. They won't fire without a round in the chamber or if
dropped. Flajim is just playing his usual role as usenet
asshole.

Are you confusing hand jobs with trigger jobs? And, FlaJim doesn't even come close to
being a 'usenet asshole'.

Shame on you, especially as you know better...being an expert on usenet assholishness
and all.

How're the owls doing in all this snow?
--

Ban idiots, not guns!


I value your opinion almost as little as I value FlaJim's. He's a usenet
asshole.

On Sat, 23 Jan 2016 12:54:43 -0500, Keyser Söze wrote:

On 1/23/16 12:50 PM, John H. wrote:
On Sat, 23 Jan 2016 12:27:22 -0500 (EST), Keyser Soze wrote:

Tim Wrote in message:
5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun was.
--------

Polishing triggers. I never saw much future in stuff like that.


I never have a round chambered unless I am about to fire 5th
edition gun. Four of the five firearms I use have had trigger
jobs. They won't fire without a round in the chamber or if
dropped. Flajim is just playing his usual role as usenet
asshole.

Are you confusing hand jobs with trigger jobs? And, FlaJim doesn't even come close to
being a 'usenet asshole'.

Shame on you, especially as you know better...being an expert on usenet assholishness
and all.

How're the owls doing in all this snow?
--

Ban idiots, not guns!


I value your opinion almost as little as I value FlaJim's. He's a usenet
asshole.


I gave you no opinion.

Uh....the owls?
--

Ban idiots, not guns!

On 1/23/2016 12:54 PM, Keyser Söze wrote:
On 1/23/16 12:50 PM, John H. wrote:
On Sat, 23 Jan 2016 12:27:22 -0500 (EST), Keyser Soze
wrote:

Tim Wrote in message:
5:24 AMJustan Olphart
- show quoted text -
I wouldn't get all warm and fuzzy knowing that, at some point in a
gun's
life, it passed a drop test. There are some cowboys out there who have
trigger work done that would make a gun more likely to go off when
dropped. There was a poster here that had work done on his gun that
caused it to be dangerous to even look at. He got rid of it like a hot
potatoe once it was brought to his attention how dangerous that gun
was.
--------

Polishing triggers. I never saw much future in stuff like that.


I never have a round chambered unless I am about to fire 5th
edition gun. Four of the five firearms I use have had trigger
jobs. They won't fire without a round in the chamber or if
dropped. Flajim is just playing his usual role as usenet
asshole.

Are you confusing hand jobs with trigger jobs? And, FlaJim doesn't
even come close to
being a 'usenet asshole'.

Shame on you, especially as you know better...being an expert on
usenet assholishness
and all.

How're the owls doing in all this snow?
--

Ban idiots, not guns!


I value your opinion almost as little as I value FlaJim's. He's a usenet
asshole.
I'm really a nice guy, but I also understand why YOU think I'm an asshole.