BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)

- General (https://www.boatbanter.com/general/)

- - Yo Tim (https://www.boatbanter.com/general/160743-yo-tim.html)

Poquito Loco

April 28th 14 03:28 PM

Yo Tim

Does that 'O' ring look mangled enough to cause a problem?

http://i98.photobucket.com/albums/l2...ngledOring.jpg

I couldn't find anything wrong with the needle valve, so I'm thinking this may be the problem. I
always new there was a reason to save old 'O' rings!

Tim	April 28th 14 05:49 PM

Yo Tim

iPhone pic doesn't allow me to get a good look at it. But if it's warped any I'd say it needs replaced.

Poquito Loco

April 28th 14 06:31 PM

Yo Tim

On Mon, 28 Apr 2014 09:49:00 -0700 (PDT), Tim wrote:

iPhone pic doesn't allow me to get a good look at it. But if it's warped any I'd say it needs replaced.

Done. Leak has stopped. Now I need to re-sync and adjust idle/mixture again. Guzzi's are just so
much fun!

Almost makes me wish I had a Honda which needed no maintenance (not even a chain adjustment?) for
15,000 miles!

Tim	April 28th 14 06:48 PM

Yo Tim

And you'd never have to grease the swingarm bushings or change the fork seals either.

KC	April 28th 14 08:16 PM

Yo Tim

On 4/28/2014 1:48 PM, Tim wrote:
And you'd never have to grease the swingarm bushings or change the fork seals either.

Fork seals, 15000 miles.. I bet it was harry krause the rec.boats idiot
that said that??

All times are GMT +1. The time now is 11:42 AM.