![]() |
Quadcopters, Video Cameras, etc.
On 3/7/14, 5:31 PM, Poco Loco wrote:
On Fri, 07 Mar 2014 15:28:25 -0500, F*O*A*D wrote: On 3/7/14, 1:28 PM, Poco Loco wrote: On Fri, 07 Mar 2014 13:10:21 -0500, F*O*A*D wrote: On 3/7/14, 1:01 PM, Poco Loco wrote: On Fri, 07 Mar 2014 12:48:23 -0500, F*O*A*D wrote: On 3/7/14, 12:26 PM, Poco Loco wrote: On Fri, 07 Mar 2014 10:40:54 -0500, F*O*A*D wrote: On 3/7/14, 10:30 AM, Poco Loco wrote: On Fri, 07 Mar 2014 06:43:41 -0500, F*O*A*D wrote: On 3/7/14, 1:23 AM, thumper wrote: On 3/6/2014 10:36 AM, Mr. Luddite wrote: Believe it or not one of the most effective types of jammers is also the oldest and first type of RF transmitter used. It's called a spark-gap transmitter and it generates RF interference across a very broad range of frequencies simultaneously. The operation of a spark-gap transmitter is illegal now-a-days for exactly that reason but are simple to make and can be of more than enough power to temporarily wipe out communications to virtually any radio controlled device. And some things you really don't want to interfere with that will draw attention. Controlled bandwidth jammers are pretty easy to make and way less obnoxious. More fun would be a hardened backyard toy chopper of your own, armed with sharp steel rotor blades that could be used to slice and dice the toy choppers of nosy neighbors whose devices violate your air space. Chopper wars! It's the 'Merican way. One can envision the escalation, all the way up to MINI NUKES, available soon from the NRA. Cool idea, FOAD! How about missiles - already available! https://www.youtube.com/watch?v=YNQ_5yd_1AA Sharp steel rotor blades would damage the other aircraft, but would also be damaged by the impact. Plus, if one came flying off while powering up, you could lose your head! The design of the blades on my 'copter allow for strikes against walls, ceilings, furniture, etc, without damage to either. Airborne miniature lasers...or maybe ground to air lasers. I got one of these for the Sig. Don't think it would do much damage to an RC quadcopter though. http://cdn1.cheaperthandirt.com/ctd_...d/9-167035.jpg They're a big help in practicing a steady grip. I have a steady grip. I've never used a laser pointer on a pistol, but I do have a red dot sight I can use on the one semi-auto pistol I've kept. Well, there you go. I still can't keep that red dot in one spot at ten yards. It moves around. I'd like to get steady, like you are, but I'll need to practice. I doubt I could keep a laser pointer very steady, either...too much compensating for minute movements, I think. Much easier using a red dot to sight in on a target, though I admit that the purposes of a red dot vs. a laser sight are not the same. This? http://www.aimpoint.com/us/products/...t/Micro%20H-1/ Do you use it on your carry pistol also? Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? Absolutely. This isn't my rig, but it looks very much like this: http://tinyurl.com/kcken5u I have a very similar pistol with the identical mounting rail. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 17:31:12 -0500, Poco Loco
wrote: Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? === Most of the guys that I shoot with are using that or one of these: http://www.amazon.com/NcSTAR-Sight-T.../dp/B001COQOZI For rapid fire 22 I prefer the NcSTAR. Prices have come down a lot since I got mine. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 19:09:27 -0500, Wayne.B wrote:
On Fri, 07 Mar 2014 17:31:12 -0500, Poco Loco wrote: Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? === Most of the guys that I shoot with are using that or one of these: http://www.amazon.com/NcSTAR-Sight-T.../dp/B001COQOZI For rapid fire 22 I prefer the NcSTAR. Prices have come down a lot since I got mine. Thanks. I think I'll just stick with the regular sights. I don't see how that thing would mount to my Sig without drilling some screw holes or putting a contraption on the existing under-barrel mount. |
Quadcopters, Video Cameras, etc.
On 3/7/14, 8:02 PM, Poco Loco wrote:
On Fri, 07 Mar 2014 19:09:27 -0500, Wayne.B wrote: On Fri, 07 Mar 2014 17:31:12 -0500, Poco Loco wrote: Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? === Most of the guys that I shoot with are using that or one of these: http://www.amazon.com/NcSTAR-Sight-T.../dp/B001COQOZI For rapid fire 22 I prefer the NcSTAR. Prices have come down a lot since I got mine. Thanks. I think I'll just stick with the regular sights. I don't see how that thing would mount to my Sig without drilling some screw holes or putting a contraption on the existing under-barrel mount. The Ruger Mark III I occasionally use with the red dot sight has three small machine screws drilled into the top of the barrel. When you remove those screws, you can place a top-mount rail and screw it down with the three screws that come with the rail. The rail does not interfere with sighting with the pistol's rear and forward sights. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 20:02:16 -0500, Poco Loco
wrote: On Fri, 07 Mar 2014 19:09:27 -0500, Wayne.B wrote: On Fri, 07 Mar 2014 17:31:12 -0500, Poco Loco wrote: Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? === Most of the guys that I shoot with are using that or one of these: http://www.amazon.com/NcSTAR-Sight-T.../dp/B001COQOZI For rapid fire 22 I prefer the NcSTAR. Prices have come down a lot since I got mine. Thanks. I think I'll just stick with the regular sights. I don't see how that thing would mount to my Sig without drilling some screw holes or putting a contraption on the existing under-barrel mount. === You'd probably have to take it to a gunsmith and have the top of the barrel drilled and tapped for a Weaver rail. I had that done for one of my High Standard 22s and it was not that bad a job. Sometimes if you look closely you'll find that the barrel has already been drilled and tapped with small dummy screws inserted. My Ruger III is like that. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 21:05:34 -0500, Wayne.B wrote:
On Fri, 07 Mar 2014 20:02:16 -0500, Poco Loco wrote: On Fri, 07 Mar 2014 19:09:27 -0500, Wayne.B wrote: On Fri, 07 Mar 2014 17:31:12 -0500, Poco Loco wrote: Similar in concept, but much, much cheaper. About $80 or so. Bushnell Trophy TRS-25 Red Dot Sight I just use it to fool around with...some guys use one to hunt game. I hunt game at the supermarket...no firearms needed. And you mount that on a pistol? === Most of the guys that I shoot with are using that or one of these: http://www.amazon.com/NcSTAR-Sight-T.../dp/B001COQOZI For rapid fire 22 I prefer the NcSTAR. Prices have come down a lot since I got mine. Thanks. I think I'll just stick with the regular sights. I don't see how that thing would mount to my Sig without drilling some screw holes or putting a contraption on the existing under-barrel mount. === You'd probably have to take it to a gunsmith and have the top of the barrel drilled and tapped for a Weaver rail. I had that done for one of my High Standard 22s and it was not that bad a job. Sometimes if you look closely you'll find that the barrel has already been drilled and tapped with small dummy screws inserted. My Ruger III is like that. Nope, no dummy screws in the Sig P226. I'll just have to practice more with the laser to steady up the grip. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 21:39:34 -0500, Poco Loco
wrote: I'll just have to practice more with the laser to steady up the grip. === Your stance, breathing and arms play into steadiness just as much as your grip. Working on arm strength with 10 lb barbells can help also. You will always have some "wobble" and it increases as you hold on target longer. I like to do a full exhale and hold it as I bring the gun up. As you push forward on your trigger arm, and pull back with your supporting arm, there should be a brief moment when your wobble noticably decreases. That's when you want to squeeze off the shot. |
Quadcopters, Video Cameras, etc.
On Fri, 07 Mar 2014 21:52:18 -0500, Wayne.B wrote:
On Fri, 07 Mar 2014 21:39:34 -0500, Poco Loco wrote: I'll just have to practice more with the laser to steady up the grip. === Your stance, breathing and arms play into steadiness just as much as your grip. Working on arm strength with 10 lb barbells can help also. You will always have some "wobble" and it increases as you hold on target longer. I like to do a full exhale and hold it as I bring the gun up. As you push forward on your trigger arm, and pull back with your supporting arm, there should be a brief moment when your wobble noticably decreases. That's when you want to squeeze off the shot. You sound like the guy I went to for instruction. Don't you need to visit the Smithsonian or have a conversation with your congressman or something up in this neck of the woods? Then I could take you to Sharpshooters with me! |
Quadcopters, Video Cameras, etc.
|
Quadcopters, Video Cameras, etc.
On Sat, 08 Mar 2014 08:12:30 -0500, Poco Loco
wrote: On Fri, 07 Mar 2014 21:52:18 -0500, Wayne.B wrote: On Fri, 07 Mar 2014 21:39:34 -0500, Poco Loco wrote: I'll just have to practice more with the laser to steady up the grip. === Your stance, breathing and arms play into steadiness just as much as your grip. Working on arm strength with 10 lb barbells can help also. You will always have some "wobble" and it increases as you hold on target longer. I like to do a full exhale and hold it as I bring the gun up. As you push forward on your trigger arm, and pull back with your supporting arm, there should be a brief moment when your wobble noticably decreases. That's when you want to squeeze off the shot. You sound like the guy I went to for instruction. Don't you need to visit the Smithsonian or have a conversation with your congressman or something up in this neck of the woods? Then I could take you to Sharpshooters with me! === The weather's pretty nice in Florida right now. :-) If you come on down you might get a boat ride as well. Don't bring YKW however. He doesn't like SWFL. |
All times are GMT +1. The time now is 03:31 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com