BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Cordless drill as Electric Winch Handle (https://www.boatbanter.com/general/15954-cordless-drill-electric-winch-handle.html)

Todd Shuster April 28th 04 08:30 PM

Cordless drill as Electric Winch Handle
 
I just read a couple posts on using a cordless (24v) electric drill as an
electric winch handle...Has anybody done this? were you satisfied with the
performance.

The off the shelf electric winch handle is over $2000 so this could be a
great alternative for those with big mainsails!

--

Captain Todd Shuster

Gato Verde Adventure Sailing School
Not your average sailing charter....

www.gatoverde.com




007 April 29th 04 12:03 AM

Cordless drill as Electric Winch Handle
 
When I deteriorate to the point I need an electric winch to hoist sails or even an electric reel for fishing, I will hang up my lines and purchase a set of golf clubs although I have no idea what they're for...

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158


"Todd Shuster" wrote in message news:1DTjc.39012$cF6.1702272@attbi_s04...
I just read a couple posts on using a cordless (24v) electric drill as an
electric winch handle...Has anybody done this? were you satisfied with the
performance.

The off the shelf electric winch handle is over $2000 so this could be a
great alternative for those with big mainsails!

--

Captain Todd Shuster

Gato Verde Adventure Sailing School
Not your average sailing charter....

www.gatoverde.com




d parker April 29th 04 12:34 AM

Cordless drill as Electric Winch Handle
 
Golf clubs are for hitting big fish on head with.. You know! The ones that you land and they knock ya beer over.

DP
"007" wrote in message ...
When I deteriorate to the point I need an electric winch to hoist sails or even an electric reel for fishing, I will hang up my lines and purchase a set of golf clubs although I have no idea what they're for...

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158


"Todd Shuster" wrote in message news:1DTjc.39012$cF6.1702272@attbi_s04...
I just read a couple posts on using a cordless (24v) electric drill as an
electric winch handle...Has anybody done this? were you satisfied with the
performance.

The off the shelf electric winch handle is over $2000 so this could be a
great alternative for those with big mainsails!

--

Captain Todd Shuster

Gato Verde Adventure Sailing School
Not your average sailing charter....

www.gatoverde.com





007 April 29th 04 12:58 AM

Cordless drill as Electric Winch Handle
 
Damn... That's a stellar idea... I was getting tired of that old dreary ..45 ACP.... Some of them took 3-4 rounds to quit floundering... That gets expensive... eh?

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158

"d parker" wrote in message . au...
Golf clubs are for hitting big fish on head with.. You know! The ones that you land and they knock ya beer over.

DP
"007" wrote in message ...
When I deteriorate to the point I need an electric winch to hoist sails or even an electric reel for fishing, I will hang up my lines and purchase a set of golf clubs although I have no idea what they're for...

snip

Todd Shuster April 29th 04 01:29 AM

Cordless drill as Electric Winch Handle
 
Here is a thread with more info
http://www.cs-bb.com/forums/CSBB/ind...ames/read/8609 and a link to
a company that has a $40 winch bit to fit a 1/2" drill. They suggest a 18 v
drill with 450 in./lbs torque

ebay link:
http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW



marklan April 29th 04 01:45 AM

Cordless drill as Electric Winch Handle
 
The Cordless drill being used is a great idea.I did know that if the rope
broke, to your pull start Briggs and Stratton lawn mower .all you had to do
was take the cage of the top of the motor and there is about a 11\4in nut on
the top dead center of the round thing a ma gig that pulls the rope back.
you could start the lawn mower with a socket in the drill (set it on the
highest speed) slicker than sh-- Sure beats all that pulling!!!
"Todd Shuster" wrote in message
news:1DTjc.39012$cF6.1702272@attbi_s04...
I just read a couple posts on using a cordless (24v) electric drill as an
electric winch handle...Has anybody done this? were you satisfied with

the
performance.

The off the shelf electric winch handle is over $2000 so this could be a
great alternative for those with big mainsails!

--

Captain Todd Shuster

Gato Verde Adventure Sailing School
Not your average sailing charter....

www.gatoverde.com






DirtCrashr April 29th 04 02:42 AM

Cordless drill as Electric Winch Handle
 
On Wed, 28 Apr 2004 19:58:34 -0400, "007"
wrote:

Damn... That's a stellar idea... I was getting tired of that old dreary .45 ACP.... Some of them took 3-4 rounds to quit floundering... That gets expensive... eh?


What no 12-guage?

-keith
mtn. view

007 April 29th 04 11:20 PM

Cordless drill as Electric Winch Handle
 
I'll never tell... ;-)

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158

"DirtCrashr" wrote in message ...
On Wed, 28 Apr 2004 19:58:34 -0400, "007"
wrote:

Damn... That's a stellar idea... I was getting tired of that old dreary .45 ACP.... Some of them took 3-4 rounds to quit floundering... That gets expensive... eh?


What no 12-guage?

-keith
mtn. view

007 April 29th 04 11:23 PM

Cordless drill as Electric Winch Handle
 
LOL, Works on kickers too... Now I will confess I have done exactly that with a stuborn one that wouldn't start....

Milwaukee Marine anyone?

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158

"marklan" wrote in message news:UeYjc.10047$lz5.978583@attbi_s53...
The Cordless drill being used is a great idea.I did know that if the rope
broke, to your pull start Briggs and Stratton lawn mower .all you had to do
was take the cage of the top of the motor and there is about a 11\4in nut on
the top dead center of the round thing a ma gig that pulls the rope back.
you could start the lawn mower with a socket in the drill (set it on the
highest speed) slicker than sh-- Sure beats all that pulling!!!
"Todd Shuster" wrote in message
news:1DTjc.39012$cF6.1702272@attbi_s04...
I just read a couple posts on using a cordless (24v) electric drill as an
electric winch handle...Has anybody done this? were you satisfied with

the
performance.

The off the shelf electric winch handle is over $2000 so this could be a
great alternative for those with big mainsails!

--

Captain Todd Shuster

Gato Verde Adventure Sailing School
Not your average sailing charter....

www.gatoverde.com






DirtCrashr April 30th 04 01:20 AM

Cordless drill as Electric Winch Handle
 

Don't they call it a "marine line-launcher...?"
;-)
How else are you supposed to deal with pirates?

-k

"DirtCrashr"

What no 12-guage?

-keith
mtn. view



I'll never tell... ;-)

--
Bubba
~~~_/)~O~~~
~~~~~~~~~~
On Apalachee Bay - The Pirate Coast
Home of Billy Bowlegs and Mysterious Waters
Wakulla County, Florida
~Wet Dreams~
1972 Coronado C-23 Hull Number 158



Damn... That's a stellar idea... I was getting tired of that old dreary .45 ACP.... Some of them took 3-4 rounds to quit floundering... That gets expensive... eh?




All times are GMT +1. The time now is 02:55 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com