Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #61   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2013
Posts: 144
Default Try this in today's cars.

On 10/2/2013 1:12 PM, Califbill wrote:
iBoaterer wrote:
In article 229120300402348262.061849bmckeenospam-
, says...

iBoaterer wrote:
In article 728598659402347004.526456bmckeenospam-
, says...

iBoaterer wrote:
In article 593009133402335399.597221bmckeenospam-
, says...

iBoaterer wrote:
In article 327587060402333680.230404bmckeenospam-
, says...

iBoaterer wrote:
In article ,
says...

On Sun, 29 Sep 2013 12:14:55 -0700 (PDT), True North
wrote:

If you had any brains you'd realize how hard salt water can be on
boat trailer brakes.

That doesn't change the law.

http://www.roadkingtrailers.com/brakelaws.htm

Don lives in Canada.

And when I tow to Canada, I see that they are good at enforcing their
trailer laws. Coming off the ferry on Salt Spring Island, they had a check
point to check for valid registration and if trailers have safety chains
and brakes as required.

You miss the point, though. Our laws (that were posted by state) are
different from theirs.

Theirs are tougher. Don May need brakes under Canadian laws.

I take it you didn't read his post about the laws in his province, eh?

An 18' boat and trailer probably exceed 1500# which is the cut off for
brakes in Calif. Except here they do not include the boat. Stupid
reasoning.

Again, we are talking about laws in Don's province, so this is
irrelevant.

All places seem to have similar laws.
http://www.rvda.ca/ProvBrakeReqts.asp#NS

Is his province. What does his boat, trailer and load in boat weigh? 3960#
in Nova Scotia - brakes required. Go over to Prince Edward Island, and it
is only 3300#.


He's already stated the weight of his rig and he doesn't need trailer
brakes.


True. But I hear others say they just ignore the brakes not working on the
trailer. As salt water is bad and they will go bad again. Towing with a
Rav is marginal at best. 5000# towing? Hate to stop the muther in a panic
stop with 3000# behind. 1900# seems light for an 18' boat, trailer, unless
a really lightweight trailer, and a 60 hp motor. My tandem axle EZLoader
trailer weighed 1100# by itself.

Donnie wont spend a dime on safety gear to protect himself or others
unless he is forced to. That's just the way he is.
  #62   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2008
Posts: 8,637
Default Try this in today's cars.

On Wed, 02 Oct 2013 12:12:07 -0500, Califbill wrote:

iBoaterer wrote:
In article 229120300402348262.061849bmckeenospam-
, says...

iBoaterer wrote:
In article 728598659402347004.526456bmckeenospam-
, says...

iBoaterer wrote:
In article 593009133402335399.597221bmckeenospam-
, says...

iBoaterer wrote:
In article 327587060402333680.230404bmckeenospam-
, says...

iBoaterer wrote:
In article ,
says...

On Sun, 29 Sep 2013 12:14:55 -0700 (PDT), True North
wrote:

If you had any brains you'd realize how hard salt water can be on
boat trailer brakes.

That doesn't change the law.

http://www.roadkingtrailers.com/brakelaws.htm

Don lives in Canada.

And when I tow to Canada, I see that they are good at enforcing their
trailer laws. Coming off the ferry on Salt Spring Island, they had a check
point to check for valid registration and if trailers have safety chains
and brakes as required.

You miss the point, though. Our laws (that were posted by state) are
different from theirs.

Theirs are tougher. Don May need brakes under Canadian laws.

I take it you didn't read his post about the laws in his province, eh?

An 18' boat and trailer probably exceed 1500# which is the cut off for
brakes in Calif. Except here they do not include the boat. Stupid
reasoning.

Again, we are talking about laws in Don's province, so this is
irrelevant.

All places seem to have similar laws.
http://www.rvda.ca/ProvBrakeReqts.asp#NS

Is his province. What does his boat, trailer and load in boat weigh? 3960#
in Nova Scotia - brakes required. Go over to Prince Edward Island, and it
is only 3300#.


He's already stated the weight of his rig and he doesn't need trailer
brakes.


True. But I hear others say they just ignore the brakes not working on the
trailer. As salt water is bad and they will go bad again. Towing with a
Rav is marginal at best. 5000# towing? Hate to stop the muther in a panic
stop with 3000# behind. 1900# seems light for an 18' boat, trailer, unless
a really lightweight trailer, and a 60 hp motor. My tandem axle EZLoader
trailer weighed 1100# by itself.


He's got a Highlander rated for 5000#'s. He's towing around 2000#, well within his limit. You might
have missed his getting the Highlander.
--

John H.

Hope you're having a great day!
  #63   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2011
Posts: 5,756
Default Try this in today's cars.

Good Lord..I have to spell everything out.
Had a RAV4 when I bought the 16.5 foot boat last year.
Upgraded to a 2013 Highlander with the 3.5 liter 6 cyl at the end of March 2013.
I'm legal!
  #64   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2012
Posts: 3,510
Default Try this in today's cars.

True North wrote:
Good Lord..I have to spell everything out.
Had a RAV4 when I bought the 16.5 foot boat last year.
Upgraded to a 2013 Highlander with the 3.5 liter 6 cyl at the end of March 2013.
I'm legal!


Legal and safe are not inclusive. I towed my 4400# boat and trailer with a
Chevy S10 Blazer. 5000# towing rating. Had trailer brake failure, and
that rig was an asspucker to stop. My wife's Venza is a cross between a
Highlander and a Camry. Same 6 cylinder! and probably same brakes! maybe
bigger, and I would hate to tow a 3000# rig without brakes. 2000# is OK,
but stills seems ligh unless that is a really thin skin aluminum boat.
  #65   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2011
Posts: 5,756
Default Try this in today's cars.

Legend boats boast of 100 gauge aluminum hulls.
Thicker than similar boats.


  #66   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2013
Posts: 144
Default Try this in today's cars.

On 10/2/2013 2:53 PM, Califbill wrote:
True North wrote:
Good Lord..I have to spell everything out.
Had a RAV4 when I bought the 16.5 foot boat last year.
Upgraded to a 2013 Highlander with the 3.5 liter 6 cyl at the end of March 2013.
I'm legal!


Legal and safe are not inclusive. I towed my 4400# boat and trailer with a
Chevy S10 Blazer. 5000# towing rating. Had trailer brake failure, and
that rig was an asspucker to stop. My wife's Venza is a cross between a
Highlander and a Camry. Same 6 cylinder! and probably same brakes! maybe
bigger, and I would hate to tow a 3000# rig without brakes. 2000# is OK,
but stills seems ligh unless that is a really thin skin aluminum boat.


Donnie's car is on a Camry chassis with Camry brakes. He appears to
think it's safe enough to tow a trailer without brakes. Maybe it is. Who
knows? maybe he should practice a few emergency stops and see if it
feels "safe enough".
  #67   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2013
Posts: 1,476
Default Try this in today's cars.

On 10/2/2013 4:15 PM, True North wrote:
Legend boats boast of 100 gauge aluminum hulls.
Thicker than similar boats.


Uh dummy. Similar boats have Similar thickness hulls. What is 100 gauge,
by the way?
  #68   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2013
Posts: 380
Default Try this in today's cars.

On 10/2/2013 1:34 PM, Hank© wrote:


Donnie wont spend a dime on safety gear to protect himself or others
unless he is forced to. That's just the way he is.



Some folks are just selfish like that. I remember how hard he tried to
cheap out on the tow vehicle, but you all shamed him at least out of the
Rav4...
  #69   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2013
Posts: 380
Default Try this in today's cars.

On 10/2/2013 2:03 PM, True North wrote:
Good Lord..I have to spell everything out.
Had a RAV4 when I bought the 16.5 foot boat last year.
Upgraded to a 2013 Highlander with the 3.5 liter 6 cyl at the end of March 2013.
I'm legal!


Yes, we all remember the boys shaming you into upgrading...
  #70   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2012
Posts: 3,510
Default Try this in today's cars.

True North wrote:
Legend boats boast of 100 gauge aluminum hulls.
Thicker than similar boats.


http://legendboats.com/boat/xcalibur...ibur-overview/

If this is your boat, says tow weight is 2542. Add any personnel stuff and
weight goes up.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
If boats were cars Joe ASA 2 May 23rd 07 11:44 PM
Speaking of cars... usafhg General 0 October 16th 06 08:19 PM
Sailing and Cars Capt. Rob ASA 190 May 18th 06 02:45 PM
Sailing and Cars Thom Stewart ASA 3 May 9th 06 01:55 AM


All times are GMT +1. The time now is 10:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017