|
Dremels...
I'm looking at Dremels again. Did a few years ago and there were so many
models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) |
Dremels...
On 8/27/2013 9:30 AM, F.O.A.D. wrote:
I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) What tool do you need to use that doesn't work with the standard 1/8 collet? |
Dremels...
On 8/27/13 9:42 AM, iBoaterer wrote:
In article , says... I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have both, because I had the corded model, then when they came out with cordless, I bought it, hardly ever use the corded one anymore. This exact one: http://tinyurl.com/lsnwrqb That's one of the ones I'm looking at. At the moment, they seem to be out of stock at Home Despot, so if I get this one, I'll order it from Amazon. |
Dremels...
|
Dremels...
On 8/27/2013 9:36 AM, Hank© wrote:
On 8/27/2013 9:30 AM, F.O.A.D. wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) What tool do you need to use that doesn't work with the standard 1/8 collet? He doesn't do anything himself.. did you see the nice letters he wrote to the contractor who built his deck and porch last season for him.. You know, the contractor who's trailer we "didn't" see in his driveway:) |
Dremels...
|
Dremels...
|
Dremels...
On 8/27/2013 10:14 AM, JustWaitAFrekinMinute wrote:
On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded o cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... .... but I will say, my 18 volt 3/8 chuck cordless hand drill does the job. I have gone through steel and 2 bys... Built a whole small deck for a lady with one battery switch. |
Dremels...
On Tuesday, August 27, 2013 10:14:57 AM UTC-4, JustWaitAFrekinMinute! wrote:
On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... Cordless is good for small jobs, and ones that don't take a lot of power. Very handy when working on RC airplanes. Balsa and lite ply is soft enough that it doesn't tax the cordless one much. |
Dremels...
|
Dremels...
In article ,
says... On 8/27/13 9:42 AM, iBoaterer wrote: In article , says... I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have both, because I had the corded model, then when they came out with cordless, I bought it, hardly ever use the corded one anymore. This exact one: http://tinyurl.com/lsnwrqb That's one of the ones I'm looking at. At the moment, they seem to be out of stock at Home Despot, so if I get this one, I'll order it from Amazon. Last time I checked, Lowe's has tons more Dremel stuff than HD. |
Dremels...
In article ,
says... On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... But you only use hand tools, remember??!! I love all of my cordless tools. My cordless light (flashlight!) works just great, as does my cordless sawz-all, car vac, and small skill saw. Granted, they aren't for all day work, but if I need to cut a piece of 2x4 for something, I'll grab the cordless saw in a second. |
Dremels...
On Tuesday, August 27, 2013 11:00:26 AM UTC-4, wrote:
Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. New battery technology has help tremendously. Unfortunately, the base cordless dremel is still NiCad. You have to spend more to get the lithium-ion batteries. Problem with nicads is that they lose charge just sitting, so when you want to use it, you have to charge it. If you leave it on the charger (most cheap chargers, like the dremel's) it cooks the nicads. You can get a cheap AC timer and set it to turn on 1 hour a day. Plug the charger into it, and the battery will stay topped off and ready to go without overcharging. |
Dremels...
On Tuesday, 27 August 2013 12:00:26 UTC-3, wrote:
On Tue, 27 Aug 2013 10:00:05 -0400, "F.O.A.D." wrote: On 8/27/13 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. Are you saying that if you use the tool for a job that takes a while, the battery won't last long, or are you saying that if you don't use the tool frequently, the battery won't last long? Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. Yes, I buy all corded tools for just that reason...infrequent use. Our handyman is always going from one battery to another.. using my electricity to charge the dead one. I may have to start charging him. ;-) |
Dremels...
|
Dremels...
On 8/27/2013 11:26 AM, True North wrote:
On Tuesday, 27 August 2013 12:00:26 UTC-3, wrote: On Tue, 27 Aug 2013 10:00:05 -0400, "F.O.A.D." wrote: On 8/27/13 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. Are you saying that if you use the tool for a job that takes a while, the battery won't last long, or are you saying that if you don't use the tool frequently, the battery won't last long? Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. Yes, I buy all corded tools for just that reason...infrequent use. Our handyman is always going from one battery to another.. using my electricity to charge the dead one. I may have to start charging him. ;-) Handy men sure are handy but they aren't cheap. Can do homeowners can save a bundle by doing their chores themselves. |
Dremels...
On 8/27/13 11:26 AM, True North wrote:
On Tuesday, 27 August 2013 12:00:26 UTC-3, wrote: On Tue, 27 Aug 2013 10:00:05 -0400, "F.O.A.D." wrote: On 8/27/13 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. Are you saying that if you use the tool for a job that takes a while, the battery won't last long, or are you saying that if you don't use the tool frequently, the battery won't last long? Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. Yes, I buy all corded tools for just that reason...infrequent use. Our handyman is always going from one battery to another.. using my electricity to charge the dead one. I may have to start charging him. ;-) I have a couple of older, Ni-Cad powered electric drills that are ok for light jobs but the batteries are old enough and used enough that they don't hold a full charge for long when they are not being used. New batteries are pricey. At some point, I might pop for a new 3/8" lithium-ion battery drill. The batteries supposedly are "more better." The Dremel I was looking at has a lithium-ion battery, and there is another unit that is corded. I like the idea of cordless...but the disadvantages are real. On the other hand, my 3/8" makita drill keeps running until I pull out its plug! :) |
Dremels...
On Tue, 27 Aug 2013 11:14:38 -0400, iBoaterer wrote:
In article , says... On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... But you only use hand tools, remember??!! I love all of my cordless tools. My cordless light (flashlight!) works just great, as does my cordless sawz-all, car vac, and small skill saw. Granted, they aren't for all day work, but if I need to cut a piece of 2x4 for something, I'll grab the cordless saw in a second. Cite? Scotty never said he used only hand tools. Have you ever given any thought to laying off your continuous immature crap? John (Gun Nut) H. -- Hope you're having a great day! |
Dremels...
On 8/27/2013 12:01 PM, F.O.A.D. wrote:
On 8/27/13 11:26 AM, True North wrote: On Tuesday, 27 August 2013 12:00:26 UTC-3, wrote: On Tue, 27 Aug 2013 10:00:05 -0400, "F.O.A.D." wrote: On 8/27/13 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. Are you saying that if you use the tool for a job that takes a while, the battery won't last long, or are you saying that if you don't use the tool frequently, the battery won't last long? Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. Yes, I buy all corded tools for just that reason...infrequent use. Our handyman is always going from one battery to another.. using my electricity to charge the dead one. I may have to start charging him. ;-) I have a couple of older, Ni-Cad powered electric drills that are ok for light jobs but the batteries are old enough and used enough that they don't hold a full charge for long when they are not being used. New batteries are pricey. At some point, I might pop for a new 3/8" lithium-ion battery drill. The batteries supposedly are "more better." The Dremel I was looking at has a lithium-ion battery, and there is another unit that is corded. I like the idea of cordless...but the disadvantages are real. On the other hand, my 3/8" makita drill keeps running until I pull out its plug! :) Hint: Take your finger off the trigger first. |
Dremels...
On 8/27/2013 12:01 PM, John H wrote:
On Tue, 27 Aug 2013 11:14:38 -0400, iBoaterer wrote: In article , says... On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... But you only use hand tools, remember??!! I love all of my cordless tools. My cordless light (flashlight!) works just great, as does my cordless sawz-all, car vac, and small skill saw. Granted, they aren't for all day work, but if I need to cut a piece of 2x4 for something, I'll grab the cordless saw in a second. Cite? Scotty never said he used only hand tools. Have you ever given any thought to laying off your continuous immature crap? I just don't think he can... Folks like he and don drool so much at the thought of posting some simple insult, they really can't see the rest of the conversation... I suspect harry and the rest of them really don't read much of others posts for content, only keywords... at the same time they probably read their own over and over, thinking to themselves just how clever they a) John (Gun Nut) H. |
Dremels...
On 8/27/13 1:14 PM, JustWaitAFrekinMinute wrote:
I suspect harry and the rest of them really don't read much of others posts I won't speak for "the rest of them," whomever they are, but you are right...I don't read most of what is posted in this newsgroup. Unless a bit of what they post is requoted, I don't see posts from: Slammer Herring FlaJim and his various aliases Earl and about a half dozen others. You and a couple of the other freepers here that I do read provide all the unintentional humor I can stand from usenet. |
Dremels...
In article ,
says... On Tue, 27 Aug 2013 11:14:38 -0400, iBoaterer wrote: In article , says... On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... But you only use hand tools, remember??!! I love all of my cordless tools. My cordless light (flashlight!) works just great, as does my cordless sawz-all, car vac, and small skill saw. Granted, they aren't for all day work, but if I need to cut a piece of 2x4 for something, I'll grab the cordless saw in a second. Cite? Scotty never said he used only hand tools. Have you ever given any thought to laying off your continuous immature crap? John (Gun Nut) H. Have you ever given any thought to laying off your continuous immature crap? |
Dremels...
In article ,
says... On 8/27/2013 12:01 PM, John H wrote: On Tue, 27 Aug 2013 11:14:38 -0400, iBoaterer wrote: In article , says... On 8/27/2013 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. I find other than my drill... Cordless is a toy... But you only use hand tools, remember??!! I love all of my cordless tools. My cordless light (flashlight!) works just great, as does my cordless sawz-all, car vac, and small skill saw. Granted, they aren't for all day work, but if I need to cut a piece of 2x4 for something, I'll grab the cordless saw in a second. Cite? Scotty never said he used only hand tools. Have you ever given any thought to laying off your continuous immature crap? I just don't think he can... Folks like he and don drool so much at the thought of posting some simple insult, they really can't see the rest of the conversation... I suspect harry and the rest of them really don't read much of others posts for content, only keywords... at the same time they probably read their own over and over, thinking to themselves just how clever they a) Oh, now it's Jawbone Scotty's day of whining poor poor me, I'm the victim...... |
Dremels...
|
Dremels...
|
Dremels...
On Tuesday, August 27, 2013 9:30:29 AM UTC-4, F.O.A.D. wrote:
Flagged again for **** spam. |
Dremels...
On Tuesday, August 27, 2013 1:21:30 PM UTC-4, F.O.A.D. wrote:
Unless a bit of what they post is requoted, I don't see posts from: Slammer Herring FlaJim and his various aliases Earl and about a half dozen others. Sure you don't, you lying ****. NOTHING that you ever say can be held as the truth with your ****ing track record you fat , greasy ****. |
Dremels...
On Tuesday, August 27, 2013 1:51:10 PM UTC-4, iBoaterer wrote:
Oh, now it's Jawbone Scotty's day of whining poor poor me, I'm the victim...... No, you're just a total asshole |
Dremels...
True North wrote:
On Tuesday, 27 August 2013 12:00:26 UTC-3, wrote: On Tue, 27 Aug 2013 10:00:05 -0400, "F.O.A.D." wrote: On 8/27/13 9:53 AM, wrote: On Tue, 27 Aug 2013 09:30:29 -0400, "F.O.A.D." wrote: I'm looking at Dremels again. Did a few years ago and there were so many models, I just put it off. Now, I'm interested because I have occasional use for one. Corded or cordless? I'm leaning towards cordless, though I see the see corded model has a quick release mechanism that obviates the need to use the little wrench on the collet nut to change tools but, on the other hand, all the collet sizes are not readily available if you need a different collet. So, I don't have enough info to make a decision on this yet. Just like the last time. :) I have a real Dremel and a McCulloch both corded. If you are not using them a lot the battery won't last long. Are you saying that if you use the tool for a job that takes a while, the battery won't last long, or are you saying that if you don't use the tool frequently, the battery won't last long? Both to some extent but sitting idle, either on the charger or off, is tough on batteries (particularly Ni-Cads). That is why cordless drills get such a bad rep from homeowners and contractors seem to be fine with them. Yes, I buy all corded tools for just that reason...infrequent use. Our handyman is always going from one battery to another.. using my electricity to charge the dead one. I may have to start charging him. ;-) That can sure get expensive. Make sure you give your handyman change for a dollar. |
| All times are GMT +1. The time now is 03:38 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com