|
An incomplete list...
On Fri, 08 Mar 2013 18:29:43 -0500, "F.O.A.D." wrote:
On 3/8/13 6:25 PM, jps wrote: On Fri, 08 Mar 2013 15:29:08 -0500, "F.O.A.D." wrote: ...off "accidents" this past week. Oooops. It's sickening to read these entries. I don't care who they are, their backgrounds, religion, political affiliation - it's senseless and sad. Our love of guns will spell the death of many. I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? And it's one thing if someone discharges a gun and maims or kills themselves, but quite another when that accident takes their wife, their kid, their parent a young sibling. How to describe it other than sad. Devastatingly sad. |
An incomplete list...
"F.O.A.D." wrote in message m... I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? ---------------------------------------------- Some of the pistols can be confusing ... especially the ones on the "MA Compliant" list up here. There are so many supposed "safeties" on them that you really have to stop and think about the one you are handling if you don't use it often. I have a Walther PPK/2. To lock the slide open, you first release the magazine. That allows the slide to lock in the open position. Won't lock open if there's a magazine installed. To release the slide, a magazine must be re-inserted ... either loaded or empty. The actual "safety" switch is really a de-cocker. It puts a barrier plate up so when the slide is released, it prevents the hammer from hitting the firing pin. It took me a while to understand how to use it and it's different than some of the other pistols I've tried. I can kinda see how someone could screw up if they have several guns with different operating characteristics or procedures. That's why I like revolvers. Simple. |
An incomplete list...
On 3/8/13 6:54 PM, Eisboch wrote:
"F.O.A.D." wrote in message m... I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? ---------------------------------------------- Some of the pistols can be confusing ... especially the ones on the "MA Compliant" list up here. There are so many supposed "safeties" on them that you really have to stop and think about the one you are handling if you don't use it often. I have a Walther PPK/2. To lock the slide open, you first release the magazine. That allows the slide to lock in the open position. Won't lock open if there's a magazine installed. To release the slide, a magazine must be re-inserted ... either loaded or empty. The actual "safety" switch is really a de-cocker. It puts a barrier plate up so when the slide is released, it prevents the hammer from hitting the firing pin. It took me a while to understand how to use it and it's different than some of the other pistols I've tried. I can kinda see how someone could screw up if they have several guns with different operating characteristics or procedures. That's why I like revolvers. Simple. Hmmm. On my CZ, you can drop the mag, rack the slide to make sure anything in the chamber pops out, and then lock the slide to take a close look into the chamber and barrel. That's probably more typical. You can also lock the slide open with a mag loaded. But the first step to inspecting the firearm is to drop the mag, then rack the slide, then lock the slide to make sure the firearm is empty. I never deviate from that. On the other hand, I don't keep a loaded mag in my CZ. I keep an empty mag in there. |
An incomplete list...
"F.O.A.D." wrote in message ... On 3/8/13 6:54 PM, Eisboch wrote: "F.O.A.D." wrote in message m... I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? ---------------------------------------------- Some of the pistols can be confusing ... especially the ones on the "MA Compliant" list up here. There are so many supposed "safeties" on them that you really have to stop and think about the one you are handling if you don't use it often. I have a Walther PPK/2. To lock the slide open, you first release the magazine. That allows the slide to lock in the open position. Won't lock open if there's a magazine installed. To release the slide, a magazine must be re-inserted ... either loaded or empty. The actual "safety" switch is really a de-cocker. It puts a barrier plate up so when the slide is released, it prevents the hammer from hitting the firing pin. It took me a while to understand how to use it and it's different than some of the other pistols I've tried. I can kinda see how someone could screw up if they have several guns with different operating characteristics or procedures. That's why I like revolvers. Simple. Hmmm. On my CZ, you can drop the mag, rack the slide to make sure anything in the chamber pops out, and then lock the slide to take a close look into the chamber and barrel. That's probably more typical. You can also lock the slide open with a mag loaded. But the first step to inspecting the firearm is to drop the mag, then rack the slide, then lock the slide to make sure the firearm is empty. I never deviate from that. On the other hand, I don't keep a loaded mag in my CZ. I keep an empty mag in there. ---------------------------------------- I think the difference is that on the Walther I can't lock the slide open with a magazine inserted. The first time I used it at the range I had fired two or three rounds, then tried to lock the slide open. It wouldn't, (by design) and when I released the slide it tried to load another round into the chamber, with one already loaded in the firing position. The slide would not fully return forward, so I couldn't release the magazine *or* lock the slide open. To clear it, I kept it pointed downrange and had to force the slide forward, (with the safety "on" while simultaneously depressing the magazine release button. Once the magazine dropped out, I could pull the slide back to the locked position and clear the rounds from the chamber. It was strange to me to have to do that and I wasn't sure I liked it. Later that day I loaded a magazine with a bunch of spent shells. (It loaded them fine.) I kept practicing the method for loading and clearing the chamber until I felt comfortable with it and it became more routine. But things shouldn't become *too* routine. When I clean my guns, I do so when I am not tired and I concentrate on what I am doing. |
An incomplete list...
On 3/8/13 7:39 PM, Eisboch wrote:
"F.O.A.D." wrote in message ... On 3/8/13 6:54 PM, Eisboch wrote: "F.O.A.D." wrote in message m... I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? ---------------------------------------------- Some of the pistols can be confusing ... especially the ones on the "MA Compliant" list up here. There are so many supposed "safeties" on them that you really have to stop and think about the one you are handling if you don't use it often. I have a Walther PPK/2. To lock the slide open, you first release the magazine. That allows the slide to lock in the open position. Won't lock open if there's a magazine installed. To release the slide, a magazine must be re-inserted ... either loaded or empty. The actual "safety" switch is really a de-cocker. It puts a barrier plate up so when the slide is released, it prevents the hammer from hitting the firing pin. It took me a while to understand how to use it and it's different than some of the other pistols I've tried. I can kinda see how someone could screw up if they have several guns with different operating characteristics or procedures. That's why I like revolvers. Simple. Hmmm. On my CZ, you can drop the mag, rack the slide to make sure anything in the chamber pops out, and then lock the slide to take a close look into the chamber and barrel. That's probably more typical. You can also lock the slide open with a mag loaded. But the first step to inspecting the firearm is to drop the mag, then rack the slide, then lock the slide to make sure the firearm is empty. I never deviate from that. On the other hand, I don't keep a loaded mag in my CZ. I keep an empty mag in there. ---------------------------------------- I think the difference is that on the Walther I can't lock the slide open with a magazine inserted. The first time I used it at the range I had fired two or three rounds, then tried to lock the slide open. It wouldn't, (by design) and when I released the slide it tried to load another round into the chamber, with one already loaded in the firing position. The slide would not fully return forward, so I couldn't release the magazine *or* lock the slide open. To clear it, I kept it pointed downrange and had to force the slide forward, (with the safety "on" while simultaneously depressing the magazine release button. Once the magazine dropped out, I could pull the slide back to the locked position and clear the rounds from the chamber. It was strange to me to have to do that and I wasn't sure I liked it. Later that day I loaded a magazine with a bunch of spent shells. (It loaded them fine.) I kept practicing the method for loading and clearing the chamber until I felt comfortable with it and it became more routine. But things shouldn't become *too* routine. When I clean my guns, I do so when I am not tired and I concentrate on what I am doing. I usually don't clean my pistols the same day I use them. The relatively cheap target ammo I use most of the time seems to be pretty clean, so even when I do scrub out the pistols the next day, they're very little residue anywhere. Early on when I started shooting, I used Winchester "White Box" ammo for practice. It was cheap, but I found it to be pretty dirty. Now I use Seiler & Bellot or CCI ammo for practice, and cleaning is quick and easy. |
An incomplete list...
On Mar 8, 3:18*pm, Meyer wrote:
Thank you for wasting so much of your life to compile this list for us. The compiling was done here... http://www.dailykos.com/story/2013/0.../-GunFAIL-VIII |
An incomplete list...
|
An incomplete list...
On 3/8/2013 7:54 PM, Tim wrote:
On Mar 8, 3:18 pm, Meyer wrote: Thank you for wasting so much of your life to compile this list for us. The compiling was done here... http://www.dailykos.com/story/2013/0.../-GunFAIL-VIII Oh! I guess I gave him credit for stealing intellectual property. My bad. |
An incomplete list...
On Fri, 08 Mar 2013 20:07:06 -0500, Meyer wrote:
On 3/8/2013 7:54 PM, Tim wrote: On Mar 8, 3:18 pm, Meyer wrote: Thank you for wasting so much of your life to compile this list for us. The compiling was done here... http://www.dailykos.com/story/2013/0.../-GunFAIL-VIII Oh! I guess I gave him credit for stealing intellectual property. My bad. So when you quote some crap that Fox news stole from somewhere else, and you steal it from Fox, that's ok. ****in moron. |
An incomplete list...
On Fri, 08 Mar 2013 19:53:07 -0500, "F.O.A.D." wrote:
On 3/8/13 7:39 PM, Eisboch wrote: "F.O.A.D." wrote in message ... On 3/8/13 6:54 PM, Eisboch wrote: "F.O.A.D." wrote in message m... I'm just astonished at the utter stupidity underlying many of the "accidents." Example: how dumb do you have to be to make sure a firearm is unloaded before you clean it? ---------------------------------------------- Some of the pistols can be confusing ... especially the ones on the "MA Compliant" list up here. There are so many supposed "safeties" on them that you really have to stop and think about the one you are handling if you don't use it often. I have a Walther PPK/2. To lock the slide open, you first release the magazine. That allows the slide to lock in the open position. Won't lock open if there's a magazine installed. To release the slide, a magazine must be re-inserted ... either loaded or empty. The actual "safety" switch is really a de-cocker. It puts a barrier plate up so when the slide is released, it prevents the hammer from hitting the firing pin. It took me a while to understand how to use it and it's different than some of the other pistols I've tried. I can kinda see how someone could screw up if they have several guns with different operating characteristics or procedures. That's why I like revolvers. Simple. Hmmm. On my CZ, you can drop the mag, rack the slide to make sure anything in the chamber pops out, and then lock the slide to take a close look into the chamber and barrel. That's probably more typical. You can also lock the slide open with a mag loaded. But the first step to inspecting the firearm is to drop the mag, then rack the slide, then lock the slide to make sure the firearm is empty. I never deviate from that. On the other hand, I don't keep a loaded mag in my CZ. I keep an empty mag in there. ---------------------------------------- I think the difference is that on the Walther I can't lock the slide open with a magazine inserted. The first time I used it at the range I had fired two or three rounds, then tried to lock the slide open. It wouldn't, (by design) and when I released the slide it tried to load another round into the chamber, with one already loaded in the firing position. The slide would not fully return forward, so I couldn't release the magazine *or* lock the slide open. To clear it, I kept it pointed downrange and had to force the slide forward, (with the safety "on" while simultaneously depressing the magazine release button. Once the magazine dropped out, I could pull the slide back to the locked position and clear the rounds from the chamber. It was strange to me to have to do that and I wasn't sure I liked it. Later that day I loaded a magazine with a bunch of spent shells. (It loaded them fine.) I kept practicing the method for loading and clearing the chamber until I felt comfortable with it and it became more routine. But things shouldn't become *too* routine. When I clean my guns, I do so when I am not tired and I concentrate on what I am doing. I usually don't clean my pistols the same day I use them. The relatively cheap target ammo I use most of the time seems to be pretty clean, so even when I do scrub out the pistols the next day, they're very little residue anywhere. Early on when I started shooting, I used Winchester "White Box" ammo for practice. It was cheap, but I found it to be pretty dirty. Now I use Seiler & Bellot or CCI ammo for practice, and cleaning is quick and easy. I don't usually wait more than a few days... tend to forget, then it just eats things up. |
| All times are GMT +1. The time now is 06:17 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com