On Sat, 26 Feb 2011 09:25:07 -0800, Frogwatch wrote:

A pretty Spring day. Took part of the morning to repair a spot on my
Tolman where I put he epoxy on in too cold weathe4r and it did not
adhere well enough. Drilled holes thru the glass and into the wood and
injected epoxy with a syringe then seriously clamped it.

If you are going to do much of that, you seriously need to invest in a
vacuum pump...



--
C:\Program Files\Pan\Signatures\boating.txt

On Feb 26, 12:33*pm, Gene
wrote:
On Sat, 26 Feb 2011 09:25:07 -0800, Frogwatch wrote:
A pretty Spring day. *Took part of the morning to repair a spot on my
Tolman where I put he epoxy on in too cold weathe4r and it did not
adhere well enough. *Drilled holes thru the glass and into the wood and
injected epoxy with a syringe then seriously clamped it.

If you are going to do much of that, you seriously need to invest in a
vacuum pump...

--
C:\Program Files\Pan\Signatures\boating.txt

I haven't thought of doing fiberglass/ epoxy work on my boat till the
day temp gets in a high of at least 75 degrees.

On Feb 26, 2:41*pm, Tim wrote:
On Feb 26, 12:33*pm, Gene
wrote:

On Sat, 26 Feb 2011 09:25:07 -0800, Frogwatch wrote:
A pretty Spring day. *Took part of the morning to repair a spot on my
Tolman where I put he epoxy on in too cold weathe4r and it did not
adhere well enough. *Drilled holes thru the glass and into the wood and
injected epoxy with a syringe then seriously clamped it.

If you are going to do much of that, you seriously need to invest in a
vacuum pump...

--
C:\Program Files\Pan\Signatures\boating.txt

I haven't thought of doing fiberglass/ epoxy work on my boat till the
day temp gets in a high of at least 75 degrees.

BTW, Fast Orange gets unset epoxy off your hands very well.

In article debf755c-0d7a-41b0-a009-119157173086
@n16g2000prc.googlegroups.com, says...

On Feb 26, 2:41*pm, Tim wrote:
On Feb 26, 12:33*pm, Gene
wrote:

On Sat, 26 Feb 2011 09:25:07 -0800, Frogwatch wrote:
A pretty Spring day. *Took part of the morning to repair a spot on my
Tolman where I put he epoxy on in too cold weathe4r and it did not
adhere well enough. *Drilled holes thru the glass and into the wood and
injected epoxy with a syringe then seriously clamped it.

If you are going to do much of that, you seriously need to invest in a
vacuum pump...

--
C:\Program Files\Pan\Signatures\boating.txt

I haven't thought of doing fiberglass/ epoxy work on my boat till the
day temp gets in a high of at least 75 degrees.

BTW, Fast Orange gets unset epoxy off your hands very well.

Yup...

On Sat, 26 Feb 2011 17:52:33 -0800 (PST), Frogwatch
wrote:

BTW, Fast Orange gets unset epoxy off your hands very well.

Yes but you are doing something wrong if you need that. You will get
sensitized to it eventually, potentially very serious, and you can
never work with epoxy again.

http://www.fram.nl/workshop/controlled_vacuum_infusion/allergy.htm

On Feb 26, 11:35*pm, Wayne.B wrote:
On Sat, 26 Feb 2011 17:52:33 -0800 (PST), Frogwatch

wrote:
BTW, Fast Orange gets unset epoxy off your hands very well.

Yes but you are doing something wrong if you need that. *You will get
sensitized to it eventually, potentially very serious, and you can
never work with epoxy again.

http://www.fram.nl/workshop/controlled_vacuum_infusion/allergy.htm

After building 4 boats, no problem yet, yet, yet, yet, yet,yet

On Sat, 26 Feb 2011 20:58:24 -0800 (PST), "Katie O'Hara"
wrote:

On Feb 26, 11:35*pm, Wayne.B wrote:
On Sat, 26 Feb 2011 17:52:33 -0800 (PST), Frogwatch

wrote:
BTW, Fast Orange gets unset epoxy off your hands very well.

Yes but you are doing something wrong if you need that. *You will get
sensitized to it eventually, potentially very serious, and you can
never work with epoxy again.

http://www.fram.nl/workshop/controlled_vacuum_infusion/allergy.htm

After building 4 boats, no problem yet, yet, yet, yet, yet,yet

Putting aside your insane political posts, you seem only slightly
abnormal.

In article ,
says...

On Sat, 26 Feb 2011 20:58:24 -0800 (PST), "Katie O'Hara"
wrote:

On Feb 26, 11:35*pm, Wayne.B wrote:
On Sat, 26 Feb 2011 17:52:33 -0800 (PST), Frogwatch

wrote:
BTW, Fast Orange gets unset epoxy off your hands very well.

Yes but you are doing something wrong if you need that. *You will get
sensitized to it eventually, potentially very serious, and you can
never work with epoxy again.

http://www.fram.nl/workshop/controlled_vacuum_infusion/allergy.htm

After building 4 boats, no problem yet, yet, yet, yet, yet,yet

Putting aside your insane political posts, you seem only slightly
abnormal.

Didn't take you long to ruin an on topic thread, asshole.