Stain for Mahogany
 

Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.

Any name brands to pump???

Stain for Mahogany
 

On Nov 24, 6:50*pm, wrote:
On Wed, 24 Nov 2010 15:32:58 -0800 (PST), "*e#c"

wrote:
Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.

Any name brands to pump???

I wouldn't stain it at all.

I do need it darker. My friend, the Cabinet Maker calls it " Luan ".

Stain for Mahogany
 

On Nov 25, 12:19*am, wrote:
On Wed, 24 Nov 2010 20:01:51 -0800 (PST), "*e#c"

wrote:
On Nov 24, 6:50 pm, wrote:
On Wed, 24 Nov 2010 15:32:58 -0800 (PST), "*e#c"

wrote:
Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.

Any name brands to pump???

I wouldn't stain it at all.

I do need it darker. My friend, the Cabinet Maker calls it " Luan ".

Do you have some spare wood you can test your stain on? Also bear in
mind it darkens with age.
I put Minwax cherry on some luan plywood it came out a bit darker than
I expected. I should have used natural.
The plywood is the back of this cabinet.

http://gfretwell.com/ftp/tambour%20door.jpg

The rest of the wood is cypress with cherry

Thanks for the pics. I think I need darker than that for a Boat. Going
by whats there already.

Nice job !!.

Stain for Mahogany
 

On Nov 24, 11:01*pm, "*e#c" wrote:
On Nov 24, 6:50*pm, wrote:

On Wed, 24 Nov 2010 15:32:58 -0800 (PST), "*e#c"

wrote:
Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.

Any name brands to pump???

I wouldn't stain it at all.

I do need it darker. My friend, the Cabinet Maker calls it " Luan ".

I said, " Ya, its Mahogany ". He said " Ya it's Luan "..... Then I got
it.

Stain for Mahogany
 

On Nov 25, 8:10*am, Gene wrote:
On Wed, 24 Nov 2010 21:40:42 -0800 (PST), "*e#c"



wrote:
On Nov 24, 11:01*pm, "*e#c" wrote:
On Nov 24, 6:50*pm, wrote:

On Wed, 24 Nov 2010 15:32:58 -0800 (PST), "*e#c"

wrote:
Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.

Any name brands to pump???

I wouldn't stain it at all.

I do need it darker. My friend, the Cabinet Maker calls it " Luan ".

I said, " Ya, its Mahogany ". He said " Ya it's Luan "..... Then I got
it.

Minwax would work fine. You will most likely need to use a sanding
sealer, too, or it will look like you applied the Varathane over sand.
Make sure you use a 220 grit or finer paper to knock down the grain
before applying the finish.

Lauan is not mahogany and it is VERY unlikely that you actually have
lauan, if purchased in the last few years. Lauan was once widely
available from the Philippines, but due to over harvesting, is almost
unavailable. Bottom line? No telling what wood you actually have...

Wiping stain, sanding sealer, grain removal, and then a coat of finish
should keep you out of trouble....

--
It is usually futile to try to talk facts and analysis to people who are
enjoying a sense of moral superiority in their ignorance.
*-Thomas Sowell

Grady-White Gulfstream, out of Oak Island, NC.

Homepage
*http://pamandgene.tranquilrefuge.net/boating/the_boat/my_boat.htm

Forté Agent 6.00 Build 1186

They sell it as Mahogany. It looks like Mahogany. I think Ill test a
dark stain. It is going to be visible, and in the weather.

Stain for Mahogany
 

wrote:
On Wed, 24 Nov 2010 20:01:51 -0800 (PST), "*e#c"
wrote:


On Nov 24, 6:50 pm, wrote:

On Wed, 24 Nov 2010 15:32:58 -0800 (PST), "*e#c"

wrote:

Any recommendations for Stain? I'd like a bright finish before sealing
with varathane, and am asking for your experiences.


Any name brands to pump???

I wouldn't stain it at all.

I do need it darker. My friend, the Cabinet Maker calls it " Luan ".

Do you have some spare wood you can test your stain on? Also bear in
mind it darkens with age.
I put Minwax cherry on some luan plywood it came out a bit darker than
I expected. I should have used natural.
The plywood is the back of this cabinet.

http://gfretwell.com/ftp/tambour%20door.jpg

The rest of the wood is cypress with cherry

Lauan comes in many natural shades since it is a generic term for
several different trees.

Stain for Mahogany
 

You didn't say what make of boat you're working on. I had two Chris
Craft cruisers back when "woodies" were still around. I used
Dolphonite walnut filler stain for the most part. It became hard to
find Chris Craft paint , stain & varnish, so had to try others.
Dolphonite came the closest to the original CC walnut that most CC
boats had. Pettit had good paint & varnish, too.