LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #20   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jun 2009
Posts: 1,005
Default Getting a pontoon boat to plane

On Nov 4, 3:38*pm, wrote:
On Thu, 04 Nov 2010 13:06:23 -0400, HarryK wrote:
Or he could get a *boat that was designed to plane. *I don't have much
sympathy for people that get one thng and then spend a lot of time and
money trying to make it work like something else. *I don't care what
you do to a pontoon, any ordinary go fast boat will blow it away on
half the gas.


I have a pontoon and I agree with you. This is not supposed to be a
speed demon. I like mine because it is a very shallow draft boat with
lots of deck space and very low maintenance, Most pontooners have a
deck full of furniture and end up with a high maintenance boat you can
barely walk around in. They then want it to perform like a bass boat
so they end up putting huge engines on them. The one that really makes
me laugh is they also polish the toons to a mirror like finish. I
can't get them to say what percentage of the time they spend using the
boat vs working on their boat in the driveway. In that regard, fuel
consumption is probably not that big a deal. They only run them 20 or
30 hours a year. That is about a month for me and we are not getting
out as much as we used to.


The few I have seen out on the river here don't seem to "corner" too
quickly...and they seem to need a really wide area while on plane in
order to make a tight turn. Or maybe it's just an optical illusion.


Mine turns pretty quickly but I don't really go that fast.
I assume if you have strakes and a huge motor you could get pretty
squirrly in a turn but bass boats can have the same problem.


Again, for the 47th time, here's what a properly designed pontoon can
do. Mine is like the white one with the red stripe with the two
bucket seats up front. :-

http://www.pontoons.com/ptx_performa...vantage_video/



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stanley 12-508 Replacement Block Plane Iron Cutter for Plane #12-331 [email protected] Cruising 0 May 22nd 09 11:49 AM
Ground Plane for aluminum boat Hanz Schmidt Electronics 16 July 8th 07 01:57 PM
Engine stumble, backfire, boat won't plane... Paul General 7 September 10th 06 12:24 AM
Boat won't get on plane dixon General 3 December 6th 04 02:20 PM
Boat looses plane? ReevesJ32 General 4 July 11th 03 12:29 AM


All times are GMT +1. The time now is 09:19 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017