| Page 1 of 2 | 1 | 2 |
|
|
Should I Upgrade or Update My Engine?
*e#c wrote:
On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ....and bull**** walks. As expected. |
Should I Upgrade or Update My Engine?
On Sep 1, 8:16*pm, Larry wrote:
*e#c wrote: On Aug 31, 7:56 pm, *wrote: *e#c wrote: On Aug 30, 8:38 pm, * *wrote: *e#c wrote: On Aug 30, 8:29 pm, * * *wrote: *e#c wrote: On Aug 30, 1:43 pm, * * * *wrote: On Aug 30, 1:28 pm, * * * *wrote: On Aug 30, 12:15 pm, * * * *wrote: On Aug 30, 12:00 pm, * * * *wrote: On Mon, 30 Aug 2010 07:21:18 -0500, * * * *wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. *A gallon of water weighs 8 lbs.. *To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? *Is all the space between your floor and the hull accessible? *Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. *The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. *Funny how that works, eh? *So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. |
Should I Upgrade or Update My Engine?
*e#c wrote:
On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. |
Should I Upgrade or Update My Engine?
On Sep 2, 8:20*pm, Larry wrote:
*e#c wrote: On Sep 1, 8:16 pm, *wrote: *e#c wrote: On Aug 31, 7:56 pm, * *wrote: *e#c wrote: On Aug 30, 8:38 pm, * * *wrote: *e#c wrote: On Aug 30, 8:29 pm, * * * *wrote: *e#c wrote: On Aug 30, 1:43 pm, * * * * *wrote: On Aug 30, 1:28 pm, * * * * *wrote: On Aug 30, 12:15 pm, * * * * *wrote: On Aug 30, 12:00 pm, * * * * *wrote: On Mon, 30 Aug 2010 07:21:18 -0500, * * * * *wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. *A gallon of water weighs 8 lbs.. *To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? *Is all the space between your floor and the hull accessible? *Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. *The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. *Funny how that works, eh? *So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poor Larry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. |
Should I Upgrade or Update My Engine?
*e#c wrote:
On Sep 2, 8:20 pm, wrote: *e#c wrote: On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poor Larry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. Your buddy Krause is the KING of lies. Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? |
Should I Upgrade or Update My Engine?
On Sep 3, 8:58*pm, Larry wrote:
*e#c wrote: On Sep 2, 8:20 pm, *wrote: *e#c wrote: On Sep 1, 8:16 pm, * *wrote: *e#c wrote: On Aug 31, 7:56 pm, * * *wrote: *e#c wrote: On Aug 30, 8:38 pm, * * * *wrote: *e#c wrote: On Aug 30, 8:29 pm, * * * * *wrote: *e#c wrote: On Aug 30, 1:43 pm, * * * * * *wrote: On Aug 30, 1:28 pm, * * * * * *wrote: On Aug 30, 12:15 pm, * * * * * *wrote: On Aug 30, 12:00 pm, * * * * * *wrote: On Mon, 30 Aug 2010 07:21:18 -0500, * * * * * *wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. *A gallon of water weighs 8 lbs.. *To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? *Is all the space between your floor and the hull accessible? *Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. *The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. *Funny how that works, eh? *So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poorLarry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. *Your buddy Krause is the KING of lies. *Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? Nice try deflecting," Boatless" one.Proves my point. |
Should I Upgrade or Update My Engine?
On 9/4/10 9:30 AM, *e#c wrote:
On Sep 3, 8:58 pm, wrote: *e#c wrote: On Sep 2, 8:20 pm, wrote: *e#c wrote: On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poorLarry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. Your buddy Krause is the KING of lies. Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? Nice try deflecting," Boatless" one.Proves my point. It's nice to see "the boys" are still fuming because I won't play "the game" by the rules they like. |
Should I Upgrade or Update My Engine?
"Secular Humorist" wrote in message
... On 9/4/10 9:30 AM, *e#c wrote: On Sep 3, 8:58 pm, wrote: *e#c wrote: On Sep 2, 8:20 pm, wrote: *e#c wrote: On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poorLarry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. Your buddy Krause is the KING of lies. Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? Nice try deflecting," Boatless" one.Proves my point. It's nice to see "the boys" are still fuming because I won't play "the game" by the rules they like. Game? Rules? You are delusional. |
Should I Upgrade or Update My Engine?
*e#c wrote:
On Sep 3, 8:58 pm, wrote: *e#c wrote: On Sep 2, 8:20 pm, wrote: *e#c wrote: On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poorLarry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. Your buddy Krause is the KING of lies. Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? Nice try deflecting," Boatless" one.Proves my point. No, it only proves you are afraid of ****ing off your only friend here. A photo of my boat would involve a wager you can't afford, loser. |
Should I Upgrade or Update My Engine?
On 9/4/10 9:40 PM, Larry wrote:
*e#c wrote: On Sep 3, 8:58 pm, wrote: *e#c wrote: On Sep 2, 8:20 pm, wrote: *e#c wrote: On Sep 1, 8:16 pm, wrote: *e#c wrote: On Aug 31, 7:56 pm, wrote: *e#c wrote: On Aug 30, 8:38 pm, wrote: *e#c wrote: On Aug 30, 8:29 pm, wrote: *e#c wrote: On Aug 30, 1:43 pm, wrote: On Aug 30, 1:28 pm, wrote: On Aug 30, 12:15 pm, wrote: On Aug 30, 12:00 pm, wrote: On Mon, 30 Aug 2010 07:21:18 -0500, wrote: Best advice you got so far was to weigh the boat to see if the foam is waterlogged. I don't know if you remember Jim, but I found out that my Ranger bay boat is about 870 lbs over published weight putting the whole rig right on the edge of trailer capacity - 4,980 lbs for a 5,000 lb trailer. The foam isn't waterlogged. I called Ranger about it and they didn't have an explanation either. I got to thinking about it. A gallon of water weighs 8 lbs.. To have 870 lbs of extra water weight, the boat would have to hold 109 gals of water. That's a lot of cubic feet of water to have in foam on a 20 foot boat. How do you know the foam isn't waterlogged? Is all the space between your floor and the hull accessible? Case it's not on most boats.. You're right on the money. The Foam Cores are almost always NOT accessible. When I re-did the sub frames,and floors in my boat, it WAS accessible. No water in there, luckily.- Hide quoted text - - Show quoted text - Yep, when I redid my floor I removed the foam. The foam was only accessible with the floor removed. The plywood in mine had separated already, so it was easy. The foam cores were in the rear of the boat. Both sides, measuring 5 feet long, by 2 feet square. covered with new ply, and fiber-glassed shut using new matting. Problem is, I haven't found a paint that will adhere to the glass gelcoat... Ideas? I don't want carpet in the stern of the boat. When fishing, it gets stained with Rainbow Trout blood...lol. I could put down those 3m " no-slip " strips...... A real POS, eh? It'll take rougher water than your ****box. " Loser Larry". I thought I didn't have a boat, now I do. Funny how that works, eh? So what kind of boat do I have? You...were the one touting you had a boat. Must be a real dream machine as well, since you're " afraid " to post a picture of your so- called Boat...with you pictured in it. Now, blow up that Dinghy, and show me up...... Loser Larry. Money talks... I've always thought you were a Whore, Larry...... ...and bull**** walks. As expected. You're the one advertising you do " things " for money...Whore. The wager you avoided has nothing to do with that, and I never "advertised" that, but I do work for money - enough to afford dental care, toothpaste, and a boat built in this decade. Awwwwwwwwww...poorLarry, cant show his Boat that he doesn't have. I pity you, idiot.You have no credentials here, being an Internet Liar just like Ingersoll. LOL. I don't owe you a picture of anything, YT. Your buddy Krause is the KING of lies. Care to comment on his imaginary Lobster boat or are you afraid you will lose your only friend? Nice try deflecting," Boatless" one.Proves my point. No, it only proves you are afraid of ****ing off your only friend here. A photo of my boat would involve a wager you can't afford, loser. Larry Fart #17...what a stench. |
| All times are GMT +1. The time now is 11:29 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com