BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Computers (https://www.boatbanter.com/general/112684-computers.html)

Steve B[_2_] December 30th 09 06:13 PM

Computers
 
I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. They come with filters. Software filters
are available that are as easy to put on and use as a postage stamp. Every
one I have seen has BLOCK SENDER. Threads and people are easy to mark and
monitor and eliminate completely. RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. Use the little arrow. Yeah, that one.

There are a lot of sorry pitiful people here. And that includes EVERY ONE
OF US ON ANY GIVEN DAY IF WE'RE FEELING BAD, OR UPSET, OR WHATEVER. But
some clowns have no life but to just sit for hours every day and talk about
the Bush conspiracy, and Palin, and on and on and on.

I picture them with an IV tube, a stomach feeding tube, and sitting on an
invalid toilet so they don't have to ever get up from their computer. Any
savvy person in computers could analyze just how much time any person here
actually spends on their computer. And some of them it's sickening.

They could not possibly own a boat unless it sits in the garage or out on
the vacant lot next to their property, as they would not have time to EVER
put it in the water. And if they did, they'd have themselves lashed to the
mainsail spouting their spew to the seagulls and passing boats.

So, people, I am making a concerted effort for this year to just stay OT,
except for a little jawboning about this and that. If everyone else would
do the same, the snr would go down considerably. I belong to some groups
where the snr is nil because people will just not respond. Remember, once
one person shuts up, a conversation is over. The trolls move on. Can you
imagine what would happen if the top three trolls posted here and got no
answers? DUH!

We all know where we're at politically, financially, and socially, as a
country. We don't have to convert people. Even Mother Theresa didn't
preach, just did the deed and went out and helped people. Some of the
people in here are abso-****ing-lutely crazy. I wouldn't want to live next
door to them, or work with them, or sit down with them to a family meal.
Yet we continuously get down on the floor and wrestle with them amongst
porcine feces.

So. Today, I'm going out and put my new in the box bilge pump on, see about
cutting out a couple of rollers and realigning them, installing a new one,
and tomorrow my friend is coming up from Vegas, and come snowstorm or sun,
we're going fishing. Shoot, if I do that, I won't have that much computer
time today. Hmmmmm which one should I do? Wait, wait .......... I know
the answer to this one.

I took a look at how much time I was spending on worthless people here on
the computer, and my mathematically genius brain instantly told me that if I
had applied that time elsewhere, I could have hand built a trimaran nearly
to completion in the last year alone.

It isn't going to happen this year.

You're going to do what you're going to do. And it doesn't have to be what
I say or suggest.

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve



Harry[_2_] December 30th 09 06:19 PM

Computers
 
Steve B wrote:
I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. They come with filters. Software filters
are available that are as easy to put on and use as a postage stamp. Every
one I have seen has BLOCK SENDER. Threads and people are easy to mark and
monitor and eliminate completely. RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. Use the little arrow. Yeah, that one.


Well, discussion on that topic would be a step up for most of the
righties here...their sexual discussions concern the lube their smear on
their hand because even female sheep won't have anything to do with them.

BTW, you're supposed to post a list of everyone who has called you so
far today.

Harry[_3_] December 30th 09 06:37 PM

Computers
 
Harry wrote:
Steve B wrote:
I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. They come with filters. Software
filters are available that are as easy to put on and use as a postage
stamp. Every one I have seen has BLOCK SENDER. Threads and people
are easy to mark and monitor and eliminate completely. RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. Use the little arrow. Yeah, that one.


Well, discussion on that topic would be a step up for most of the
righties here...their sexual discussions concern the lube their smear on
their hand because even female sheep won't have anything to do with them.

BTW, you're supposed to post a list of everyone who has called you so
far today.


By the way, did you notice that I did not include any snotty comments in
this post.

RLM December 30th 09 06:40 PM

Computers
 
On Wed, 30 Dec 2009 10:13:07 -0800, Steve B wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. They come with filters. Software filters
are available that are as easy to put on and use as a postage stamp. Every
one I have seen has BLOCK SENDER. Threads and people are easy to mark and
monitor and eliminate completely. RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. Use the little arrow. Yeah, that one.

There are a lot of sorry pitiful people here. And that includes EVERY ONE
OF US ON ANY GIVEN DAY IF WE'RE FEELING BAD, OR UPSET, OR WHATEVER. But
some clowns have no life but to just sit for hours every day and talk about
the Bush conspiracy, and Palin, and on and on and on.

I picture them with an IV tube, a stomach feeding tube, and sitting on an
invalid toilet so they don't have to ever get up from their computer. Any
savvy person in computers could analyze just how much time any person here
actually spends on their computer. And some of them it's sickening.

They could not possibly own a boat unless it sits in the garage or out on
the vacant lot next to their property, as they would not have time to EVER
put it in the water. And if they did, they'd have themselves lashed to the
mainsail spouting their spew to the seagulls and passing boats.

So, people, I am making a concerted effort for this year to just stay OT,
except for a little jawboning about this and that. If everyone else would
do the same, the snr would go down considerably. I belong to some groups
where the snr is nil because people will just not respond. Remember, once
one person shuts up, a conversation is over. The trolls move on. Can you
imagine what would happen if the top three trolls posted here and got no
answers? DUH!

We all know where we're at politically, financially, and socially, as a
country. We don't have to convert people. Even Mother Theresa didn't
preach, just did the deed and went out and helped people. Some of the
people in here are abso-****ing-lutely crazy. I wouldn't want to live next
door to them, or work with them, or sit down with them to a family meal.
Yet we continuously get down on the floor and wrestle with them amongst
porcine feces.

So. Today, I'm going out and put my new in the box bilge pump on, see about
cutting out a couple of rollers and realigning them, installing a new one,
and tomorrow my friend is coming up from Vegas, and come snowstorm or sun,
we're going fishing. Shoot, if I do that, I won't have that much computer
time today. Hmmmmm which one should I do? Wait, wait .......... I know
the answer to this one.

I took a look at how much time I was spending on worthless people here on
the computer, and my mathematically genius brain instantly told me that if I
had applied that time elsewhere, I could have hand built a trimaran nearly
to completion in the last year alone.

It isn't going to happen this year.

You're going to do what you're going to do. And it doesn't have to be what
I say or suggest.

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve




^¿^
O

Yawn.

You won't be missed and glad you're "done"!
BYE!



John H[_12_] December 30th 09 06:43 PM

Computers
 
On Wed, 30 Dec 2009 10:13:07 -0800, "Steve B"
wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

A little bit snipped...

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


Wow, that was something.

Anyway, after giving the Korean guy $45 to repair my boat cover, I put
it back on the boat.

While doing so, I noticed some more little holes in the cover. These
little holes were where some oil had sprayed on the cover when the oil
cap came off my lawnmower as I was going by the boat which was on the
trailer in the driveway. As it turns out, wherever there is an oil
spot, I can put my finger through the cover.

So, my lovely wife, when I told her this story, offered to buy me a
new cover for Christmas.

She ordered it yesterday. Yippee. I can't wait to get it.
--

John H

RLM December 30th 09 07:12 PM

Computers
 
On Wed, 30 Dec 2009 13:43:15 -0500, John H wrote:

On Wed, 30 Dec 2009 10:13:07 -0800, "Steve B"
wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

A little bit snipped...

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


Wow, that was something.

Anyway, after giving the Korean guy $45 to repair my boat cover, I put
it back on the boat.

While doing so, I noticed some more little holes in the cover. These
little holes were where some oil had sprayed on the cover when the oil
cap came off my lawnmower as I was going by the boat which was on the
trailer in the driveway. As it turns out, wherever there is an oil
spot, I can put my finger through the cover.

So, my lovely wife, when I told her this story, offered to buy me a
new cover for Christmas.

She ordered it yesterday. Yippee. I can't wait to get it.


She said she was going to do that when I talked to her on the phone this
morning.


RLM December 30th 09 07:14 PM

Computers
 
On Wed, 30 Dec 2009 14:12:09 -0500, RLM wrote:

On Wed, 30 Dec 2009 13:43:15 -0500, John H wrote:

On Wed, 30 Dec 2009 10:13:07 -0800, "Steve B"
wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

A little bit snipped...

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


Wow, that was something.

Anyway, after giving the Korean guy $45 to repair my boat cover, I put
it back on the boat.

While doing so, I noticed some more little holes in the cover. These
little holes were where some oil had sprayed on the cover when the oil
cap came off my lawnmower as I was going by the boat which was on the
trailer in the driveway. As it turns out, wherever there is an oil
spot, I can put my finger through the cover.

So, my lovely wife, when I told her this story, offered to buy me a
new cover for Christmas.

She ordered it yesterday. Yippee. I can't wait to get it.


She said she was going to do that when I talked to her on the phone this
morning.


Great high jack on the thread. I knew you had it in you to get even!



John H[_12_] December 30th 09 08:52 PM

Computers
 
On Wed, 30 Dec 2009 14:12:09 -0500, RLM wrote:

On Wed, 30 Dec 2009 13:43:15 -0500, John H wrote:

On Wed, 30 Dec 2009 10:13:07 -0800, "Steve B"
wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

A little bit snipped...

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


Wow, that was something.

Anyway, after giving the Korean guy $45 to repair my boat cover, I put
it back on the boat.

While doing so, I noticed some more little holes in the cover. These
little holes were where some oil had sprayed on the cover when the oil
cap came off my lawnmower as I was going by the boat which was on the
trailer in the driveway. As it turns out, wherever there is an oil
spot, I can put my finger through the cover.

So, my lovely wife, when I told her this story, offered to buy me a
new cover for Christmas.

She ordered it yesterday. Yippee. I can't wait to get it.


She said she was going to do that when I talked to her on the phone this
morning.


Wow. I had a real hard time getting her on the phone!
--
John H

All decisions, even those of liberals, are the result of binary thinking.

RLM December 30th 09 08:59 PM

Computers
 
On Wed, 30 Dec 2009 15:52:26 -0500, John H wrote:

On Wed, 30 Dec 2009 14:12:09 -0500, RLM wrote:

On Wed, 30 Dec 2009 13:43:15 -0500, John H wrote:

On Wed, 30 Dec 2009 10:13:07 -0800, "Steve B"
wrote:

I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

A little bit snipped...

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


Wow, that was something.

Anyway, after giving the Korean guy $45 to repair my boat cover, I put
it back on the boat.

While doing so, I noticed some more little holes in the cover. These
little holes were where some oil had sprayed on the cover when the oil
cap came off my lawnmower as I was going by the boat which was on the
trailer in the driveway. As it turns out, wherever there is an oil
spot, I can put my finger through the cover.

So, my lovely wife, when I told her this story, offered to buy me a
new cover for Christmas.

She ordered it yesterday. Yippee. I can't wait to get it.


She said she was going to do that when I talked to her on the phone this
morning.


Wow. I had a real hard time getting her on the phone!



It was posibly busy at the time.


Steve B[_2_] December 30th 09 09:34 PM

Computers
 

"RLM" wrote



^¿^
O

Yawn.

You won't be missed and glad you're "done"!
BYE!


Yipee. Where am I going?

Steve



RLM December 30th 09 09:47 PM

Computers
 
On Wed, 30 Dec 2009 13:34:40 -0800, Steve B wrote:


"RLM" wrote



^¿^
O

Yawn.

You won't be missed and glad you're "done"!
BYE!


Yipee. Where am I going?

Steve


Go to Rec.Metalworking. Some there fell for your crap, once there.


*e#c December 30th 09 11:11 PM

Computers
 
On Dec 30, 1:13*pm, "Steve B" wrote:
I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. *They come with filters. *Software filters
are available that are as easy to put on and use as a postage stamp. *Every
one I have seen has BLOCK SENDER. *Threads and people are easy to mark and
monitor and eliminate completely. *RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. *Use the little arrow. *Yeah, that one.

There are a lot of sorry pitiful people here. *And that includes EVERY ONE
OF US ON ANY GIVEN DAY IF WE'RE FEELING BAD, OR UPSET, OR WHATEVER. *But
some clowns have no life but to just sit for hours every day and talk about
the Bush conspiracy, and Palin, and on and on and on.

I picture them with an IV tube, a stomach feeding tube, and sitting on an
invalid toilet so they don't have to ever get up from their computer. *Any
savvy person in computers could analyze just how much time any person here
actually spends on their computer. *And some of them it's sickening.

They could not possibly own a boat unless it sits in the garage or out on
the vacant lot next to their property, as they would not have time to EVER
put it in the water. *And if they did, they'd have themselves lashed to the
mainsail spouting their spew to the seagulls and passing boats.

So, people, I am making a concerted effort for this year to just stay OT,
except for a little jawboning about this and that. *If everyone else would
do the same, the snr would go down considerably. *I belong to some groups
where the snr is nil because people will just not respond. *Remember, once
one person shuts up, a conversation is over. *The trolls move on. *Can you
imagine what would happen if the top three trolls posted here and got no
answers? *DUH!

We all know where we're at politically, financially, and socially, as a
country. *We don't have to convert people. *Even Mother Theresa didn't
preach, just did the deed and went out and helped people. *Some of the
people in here are abso-****ing-lutely crazy. *I wouldn't want to live next
door to them, or work with them, or sit down with them to a family meal.
Yet we continuously get down on the floor and wrestle with them amongst
porcine feces.

So. *Today, I'm going out and put my new in the box bilge pump on, see about
cutting out a couple of rollers and realigning them, installing a new one,
and tomorrow my friend is coming up from Vegas, and come snowstorm or sun,
we're going fishing. *Shoot, if I do that, I won't have that much computer
time today. *Hmmmmm *which one should I do? *Wait, wait .......... I know
the answer to this one.

I took a look at how much time I was spending on worthless people here on
the computer, and my mathematically genius brain instantly told me that if I
had applied that time elsewhere, I could have hand built a trimaran nearly
to completion in the last year alone.

It isn't going to happen this year.

You're going to do what you're going to do. *And it doesn't have to be what
I say or suggest.

Just saying my say, and I'm done.

Now, if this *weather will just clear up.

Steve


The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

John H[_12_] December 30th 09 11:21 PM

Computers
 
On Wed, 30 Dec 2009 15:11:36 -0800 (PST), "*e#c"
wrote:


The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


This from the guy who was going around accusing folks of having sex
with their kids and grandkids.

You're a real winner, slammer.
--
John H

All decisions, even those of liberals, are the result of binary thinking.

Harry[_2_] December 30th 09 11:47 PM

Computers
 
John H wrote:
On Wed, 30 Dec 2009 15:11:36 -0800 (PST), "*e#c"
wrote:

The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


This from the guy who was going around accusing folks of having sex
with their kids and grandkids.

You're a real winner, slammer.



And you, herring, you are one of the ranking losers.

Harry[_2_] December 31st 09 03:08 AM

Computers
 
*e#c wrote:
On Dec 30, 1:13 pm, "Steve B" wrote:
I firmly believe that a lot of people here should take their computers
IMMEDIATELY NOW THIS AFTER NOON TODAY to Good Will.

They don't have the sense to operate them.

The computers come with arrows. They come with filters. Software filters
are available that are as easy to put on and use as a postage stamp. Every
one I have seen has BLOCK SENDER. Threads and people are easy to mark and
monitor and eliminate completely. RTFM, people.

KILL THE TROLLS AND STOP THE OT BULL****.

And it doesn't take a rocket scientist to see SUBJECT: FEMALE SHEEP
SEDUCTION TECHNIQUES, and have a reasonable guess about what the post
contains. Use the little arrow. Yeah, that one.

There are a lot of sorry pitiful people here. And that includes EVERY ONE
OF US ON ANY GIVEN DAY IF WE'RE FEELING BAD, OR UPSET, OR WHATEVER. But
some clowns have no life but to just sit for hours every day and talk about
the Bush conspiracy, and Palin, and on and on and on.

I picture them with an IV tube, a stomach feeding tube, and sitting on an
invalid toilet so they don't have to ever get up from their computer. Any
savvy person in computers could analyze just how much time any person here
actually spends on their computer. And some of them it's sickening.

They could not possibly own a boat unless it sits in the garage or out on
the vacant lot next to their property, as they would not have time to EVER
put it in the water. And if they did, they'd have themselves lashed to the
mainsail spouting their spew to the seagulls and passing boats.

So, people, I am making a concerted effort for this year to just stay OT,
except for a little jawboning about this and that. If everyone else would
do the same, the snr would go down considerably. I belong to some groups
where the snr is nil because people will just not respond. Remember, once
one person shuts up, a conversation is over. The trolls move on. Can you
imagine what would happen if the top three trolls posted here and got no
answers? DUH!

We all know where we're at politically, financially, and socially, as a
country. We don't have to convert people. Even Mother Theresa didn't
preach, just did the deed and went out and helped people. Some of the
people in here are abso-****ing-lutely crazy. I wouldn't want to live next
door to them, or work with them, or sit down with them to a family meal.
Yet we continuously get down on the floor and wrestle with them amongst
porcine feces.

So. Today, I'm going out and put my new in the box bilge pump on, see about
cutting out a couple of rollers and realigning them, installing a new one,
and tomorrow my friend is coming up from Vegas, and come snowstorm or sun,
we're going fishing. Shoot, if I do that, I won't have that much computer
time today. Hmmmmm which one should I do? Wait, wait .......... I know
the answer to this one.

I took a look at how much time I was spending on worthless people here on
the computer, and my mathematically genius brain instantly told me that if I
had applied that time elsewhere, I could have hand built a trimaran nearly
to completion in the last year alone.

It isn't going to happen this year.

You're going to do what you're going to do. And it doesn't have to be what
I say or suggest.

Just saying my say, and I'm done.

Now, if this weather will just clear up.

Steve


The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Off topic **** is my mainstay. Are the stone heads getting to you to.
Want to know how to filter them?

*e#c December 31st 09 04:32 AM

Computers
 
On Dec 30, 6:21*pm, John H wrote:
On Wed, 30 Dec 2009 15:11:36 -0800 (PST), "*e#c"

wrote:

The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


This from the guy who was going around accusing folks of having sex
with their kids and grandkids.

You're a real winner, slammer.
--
John H

All decisions, even those of liberals, are the result of binary thinking.


.....and you're a real loser, Herring.

RLM December 31st 09 03:55 PM

Computers
 
On Wed, 30 Dec 2009 18:21:36 -0500, John H wrote:

On Wed, 30 Dec 2009 15:11:36 -0800 (PST), "*e#c"
wrote:


The idiots finally conquered you, eh? They wont stop, you're wasting
your fingers typing anything to the Bozos.

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


This from the guy who was going around accusing folks of having sex
with their kids and grandkids.

You're a real winner, slammer.


Were you and your convict friend discussing this in one of his groups.

RLM December 31st 09 04:25 PM

Computers
 
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Harry[_2_] December 31st 09 04:35 PM

Computers
 
RLM wrote:
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:

Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


I'm curious. How do you make a steel leader.

Steve B[_2_] December 31st 09 05:43 PM

Computers
 

"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me. Ignore
me. Just get yer nose out of my ass.

Steve



John H[_12_] December 31st 09 06:29 PM

Computers
 
On Thu, 31 Dec 2009 09:43:54 -0800, "Steve B"
wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me. Ignore
me. Just get yer nose out of my ass.

Steve


I think he's looking for compliments on his Googling capabilities.
--
John H

"The problem with Socialism is that you eventually run out of other people’s money." --Margaret Thatcher

RLM December 31st 09 06:35 PM

Computers
 
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me. Ignore
me. Just get yer nose out of my ass.

Steve


Get used to it dim bulb.


RLM December 31st 09 06:42 PM

Computers
 
On Thu, 31 Dec 2009 13:29:42 -0500, John H wrote:

On Thu, 31 Dec 2009 09:43:54 -0800, "Steve B"
wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask how to make a steel leader on the metalworking group. I don't
believe he has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore me. Just get yer nose out of my ass.

Steve


I think he's looking for compliments on his Googling capabilities.


I'm waiting on you to announce you jackknifed your trailer in the driveway
an had to have it cut loose with a cutting torch. That sounds realistic
from you.

Steve B[_2_] December 31st 09 07:41 PM

Computers
 

"RLM" wrote

Look this guy up on google. In a months time he is full of advise but
ask how to make a steel leader on the metalworking group. I don't
believe he has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Hmmmmm. I want to make some special 2" long leaders with a slider lead
weight. I ask in a metal group which might be the best wire. Piano?
Guitar? Other?

What a weirdo I must be.

BTW, they don't have anything like that in the bait shops in my area.

Steve



Steve B[_2_] December 31st 09 07:44 PM

Computers
 

"RLM" wrote in message
...
On Thu, 31 Dec 2009 13:29:42 -0500, John H wrote:

On Thu, 31 Dec 2009 09:43:54 -0800, "Steve B"
wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask how to make a steel leader on the metalworking group. I don't
believe he has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore me. Just get yer nose out of my ass.

Steve


I think he's looking for compliments on his Googling capabilities.


I'm waiting on you to announce you jackknifed your trailer in the driveway
an had to have it cut loose with a cutting torch. That sounds realistic
from you.


When you are speaking to this third party, whom are you addressing? Are you
speaking from your soapbox to your long list of followers?

I am a retired welder. Certified. Underwater. I presently have the
equipment to handle just about any situation I may get into, or help other
people out of.

Steve



Steve B[_2_] December 31st 09 07:46 PM

Computers
 

"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve


Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.



RLM December 31st 09 07:56 PM

Computers
 
On Thu, 31 Dec 2009 11:44:11 -0800, Steve B wrote:


"RLM" wrote in message
...
On Thu, 31 Dec 2009 13:29:42 -0500, John H wrote:

On Thu, 31 Dec 2009 09:43:54 -0800, "Steve B"
wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask how to make a steel leader on the metalworking group. I don't
believe he has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore me. Just get yer nose out of my ass.

Steve


I think he's looking for compliments on his Googling capabilities.


I'm waiting on you to announce you jackknifed your trailer in the driveway
an had to have it cut loose with a cutting torch. That sounds realistic
from you.


When you are speaking to this third party, whom are you addressing? Are you
speaking from your soapbox to your long list of followers?

I am a retired welder. Certified. Underwater. I presently have the
equipment to handle just about any situation I may get into, or help other
people out of.

Steve


You have been too busy posting to learn to read a thread.


RLM December 31st 09 08:05 PM

Computers
 
On Thu, 31 Dec 2009 11:46:04 -0800, Steve B wrote:


"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve


Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Good then you won't know when I post. Now I won't have to babysit you.


RLM December 31st 09 08:07 PM

Computers
 
On Thu, 31 Dec 2009 15:05:04 -0500, RLM wrote:

On Thu, 31 Dec 2009 11:46:04 -0800, Steve B wrote:


"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve

Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Good then you won't know when I post. Now I won't have to babysit you.


I forgot to add Neener! Neener! neeeener!


I am Tosk December 31st 09 08:35 PM

Computers
 
In article ,
says...

"RLM" wrote

Look this guy up on google. In a months time he is full of advise but
ask how to make a steel leader on the metalworking group. I don't
believe he has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Hmmmmm. I want to make some special 2" long leaders with a slider lead
weight. I ask in a metal group which might be the best wire. Piano?
Guitar? Other?

What a weirdo I must be.

BTW, they don't have anything like that in the bait shops in my area.

Steve


Hummm, around here we use 40-60 pound leader, plastic coated is nice,
and beads or whatever to separate the weights from the hook.

mgg January 1st 10 06:03 AM

Computers
 

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.


Look this guy up on google. In a months time he is full of advise but ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore me. Just get yer nose out of my ass.

Steve


Steve, if you do the same to him, you won't see his little rants (neither
will I). The results are the same.

--Mike



mgg January 1st 10 06:55 AM

Computers
 

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe
he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve


Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or
stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Scary when they resort to cyberstalking aint it?

--Mike



I am Tosk January 1st 10 04:33 PM

Computers
 
In article ,
says...

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe
he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve

Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or
stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Scary when they resort to cyberstalking aint it?

--Mike


Pffffttt, he did me until I plonked him.. Probaby Salty in another
life... Either way, free reader: Microplanet Gravity, Free News Server:
eternal-september.org.............. Filtering the Pink Army: Priceless!

Steve B[_2_] January 1st 10 05:45 PM

Computers
 

"mgg" wrote in message
...

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140


Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore me. Just get yer nose out of my ass.

Steve


Steve, if you do the same to him, you won't see his little rants (neither
will I). The results are the same.

--Mike


done, done, and done.



Steve B[_2_] January 1st 10 05:48 PM

Computers
 

"mgg" wrote in message
...

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe
he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve

Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or
stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Scary when they resort to cyberstalking aint it?

--Mike


And start dredging up google searches about the tiniest of subjects.
Someone's gotta have a lot of time on their hands for that. I'm not hard to
find. I even put the coordinates for my house on a birding group.

Scared? I think not. Hell, I already have a couple of things prepared for
unexpected visitors, and they aren't cookies.

Hmmmmmmm. Warming up here. Leaving for two weeks to go to San Diego, then
on a cruise, leaving Monday. Should be time for some fishing when I get
back. About nine months of it.

Steve



Jonn January 1st 10 05:49 PM

Computers
 
On Thu, 31 Dec 2009 11:46:04 -0800, Steve B wrote:


"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve


Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


He doesn't give a damn.


Steve B[_2_] January 1st 10 08:12 PM

Computers
 

"Jonn" wrote in message
...
On Thu, 31 Dec 2009 11:46:04 -0800, Steve B wrote:


"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe
he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve

Get used to it dim bulb.


I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or
stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


He doesn't give a damn.


Well, at least he'll be doing it in isolation. Probably doesn't even have a
boat.

Steve



mgg January 1st 10 11:43 PM

Computers
 

"Steve B" wrote in message
...

"mgg" wrote in message
...

"Steve B" wrote in message
...

"RLM" wrote in message
...
On Thu, 31 Dec 2009 09:43:54 -0800, Steve B wrote:


"RLM" wrote in message
...
On Wed, 30 Dec 2009 15:11:36 -0800, *e#c wrote:


Dont get me wrong, I'm WITH you on the " off-topic-**** " topic. I
ranted the same way awhile ago, but these ****s are so stone-headed,
they dont give a **** about anyone but themselves.

Look this guy up on google. In a months time he is full of advise but
ask
how to make a steel leader on the metalworking group. I don't believe
he
has ever seen the inside of a bait shop.

http://groups.google.com/groups/sear...sa=N&start=140

Your obsession for me is NOT flattering. Get a life. Killfile me.
Ignore
me. Just get yer nose out of my ass.

Steve

Get used to it dim bulb.

I don't think so.

Plonk.

Gee, that was too easy.

Anything you write now will just be either obsession, flattery, or
stalking.

Your move, Sparky.

Steve, who will be cleaning RLM's snot from my ass for a while, me doest
think.


Scary when they resort to cyberstalking aint it?

--Mike


And start dredging up google searches about the tiniest of subjects.
Someone's gotta have a lot of time on their hands for that. I'm not hard
to find. I even put the coordinates for my house on a birding group.

Scared? I think not. Hell, I already have a couple of things prepared
for unexpected visitors, and they aren't cookies.

Hmmmmmmm. Warming up here. Leaving for two weeks to go to San Diego,
then on a cruise, leaving Monday. Should be time for some fishing when I
get back. About nine months of it.

Steve


Sweet! Have fun!

--Mike




All times are GMT +1. The time now is 06:21 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com