Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
Hello all. I'm sorry, but I think this may sound stupid but I don't
know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 15:04:10 -0800, Eddie
wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie Google can be your friend. http://www.boatus.com/boattech/anchorin.htm http://www.boatus.com/boattech/anchorwn.htm -- John H |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 18:11:42 -0500, JustJohn H
wrote: On Wed, 18 Nov 2009 15:04:10 -0800, Eddie wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie Google can be your friend. http://www.boatus.com/boattech/anchorin.htm http://www.boatus.com/boattech/anchorwn.htm Excellent links John. Both are keepers. Thanks! I like this: "A handy device is an anchor retrieval system, which uses a buoy attached to the rode to help break the anchor free." Gonna put it on my shopping list. Eddie |
#4
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 15:42:05 -0800, Eddie
wrote: On Wed, 18 Nov 2009 18:11:42 -0500, JustJohn H wrote: On Wed, 18 Nov 2009 15:04:10 -0800, Eddie wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie Google can be your friend. http://www.boatus.com/boattech/anchorin.htm http://www.boatus.com/boattech/anchorwn.htm Excellent links John. Both are keepers. Thanks! I like this: "A handy device is an anchor retrieval system, which uses a buoy attached to the rode to help break the anchor free." Gonna put it on my shopping list. Eddie I've never used one, but I've never anchored a 31' boat. My biggest has been a 21'er, and it was plenty hard enough to retrieve the anchor when I had a 150' out and the wind was blowing a bit. -- John H |
#5
![]()
posted to rec.boats
|
|||
|
|||
![]() "Eddie" wrote in message ... Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie Oh boy. At this time I'd recommend a Power Squadron course to get familiar with the basics. As a general rule you should have a rode seven times longer than the deepest water you'll anchor in. As part of the rode...chain equal to your boat length. You've probably seen the different types of anchors around...so if you know what type you have it would help. example I have a little mushroom anchor with my open aluminum boat but you'd have maybe a plow type or Danforth. see: http://boatingsailing.suite101.com/a...f_boat_anchors and: http://images.google.ca/images?clien...ed=0CB0QsAQwAw |
#6
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 19:17:04 -0400, "Don White"
wrote: Oh boy. At this time I'd recommend a Power Squadron course to get familiar with the basics. Where? How much? As a general rule you should have a rode seven times longer than the deepest water you'll anchor in. As part of the rode...chain equal to your boat length. Rode is a word I've never seen or heard. (the nautical term version) I thought it was a typo until I went to the links provided by John. You've probably seen the different types of anchors around...so if you know what type you have it would help. example I have a little mushroom anchor with my open aluminum boat but you'd have maybe a plow type or Danforth. It is a Danforth. Thanks Don. Eddie see: http://boatingsailing.suite101.com/a...f_boat_anchors and: http://images.google.ca/images?clien...ed=0CB0QsAQwAw |
#7
![]()
posted to rec.boats
|
|||
|
|||
![]() "Eddie" wrote in message ... On Wed, 18 Nov 2009 19:17:04 -0400, "Don White" wrote: Oh boy. At this time I'd recommend a Power Squadron course to get familiar with the basics. Where? How much? ** I could give you the Canadian site but I'm guessing you are south of the border. Use that Google fella to find the US Power Squadron nearest you.** As a general rule you should have a rode seven times longer than the deepest water you'll anchor in. As part of the rode...chain equal to your boat length. Rode is a word I've never seen or heard. (the nautical term version) I thought it was a typo until I went to the links provided by John. You've probably seen the different types of anchors around...so if you know what type you have it would help. example I have a little mushroom anchor with my open aluminum boat but you'd have maybe a plow type or Danforth. It is a Danforth. Thanks Don. Eddie see: http://boatingsailing.suite101.com/a...f_boat_anchors and: http://images.google.ca/images?clien...ed=0CB0QsAQwAw |
#8
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 15:04:10 -0800, Eddie
wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie I've used an anchor many times. It works by holding your boat in one place, if it's working. Has to be heavy enough to dig into the mud or sand. Or maybe it will get stuck in some debris. That's bad though. Have to have at least 3 times the depth of the water of rope. They call that scope. If the anchor is straight down it won't work well. To disengage you get right over it and pull it straight up. If it's stuck you cut the rope or chain. That's why you use rope. Cuts easier. A windlass is similar to a pulley on a tow truck, but for a boat. Electric powered, or cranked by hand. Probably safer. You don't want to take a wrap of anchor rope around your hand, especially when somebody else is near the throttle. My stepmother lost 3 fingers doing that. That's why she's now called Elayne 2-fingers. Think that math is right. --Vic enough rope to reach the bottom |
#9
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 17:18:25 -0600, Vic Smith
wrote: On Wed, 18 Nov 2009 15:04:10 -0800, Eddie wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie I've used an anchor many times. It works by holding your boat in one place, if it's working. Has to be heavy enough to dig into the mud or sand. Or maybe it will get stuck in some debris. That's bad though. Have to have at least 3 times the depth of the water of rope. They call that scope. If the anchor is straight down it won't work well. To disengage you get right over it and pull it straight up. If it's stuck you cut the rope or chain. That's why you use rope. Cuts easier. A windlass is similar to a pulley on a tow truck, but for a boat. Electric powered, or cranked by hand. Probably safer. You don't want to take a wrap of anchor rope around your hand, especially when somebody else is near the throttle. My stepmother lost 3 fingers doing that. That's why she's now called Elayne 2-fingers. Think that math is right. --Vic You just made my eyes water from laughter. |
#10
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Wed, 18 Nov 2009 15:04:10 -0800, Eddie
wrote: Hello all. I'm sorry, but I think this may sound stupid but I don't know anything about anchors. I have a 31' Regal and have never used the anchor. The few times I've used the boat is just for cruising, have never needed to stop in the middle of the water like some people I see especially fishermen. So how does it work? What if the water is too deep? If I lower it how does it hook up below the water? How do I disengage it? What if it's stuck and unable to disengage? Do I cut it? What if it's a metal chain? And finally, what is a windlass? How does it work? Thanks for any help Eddie Eddie, You need one of these... http://www.amazon.com/Chapman-Piloti.../dp/1588160890 All sorts of good basic information on equipment, lines, knots, anchors, handling, weather, maintenance, etc. Good investment for your peace of mind and safety of you and yours. It's not a car, there's real danger out there and having basic knowledge can really save your ass, nevermind your life. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Metal Keel, fin, finish, repair, questions, questions | Boat Building | |||
Basic Questions: Anchor Buddy, Unlaunching | General | |||
A better anchor | ASA | |||
More anchor questions | ASA | |||
land anchor vs fluke anchor for anchors set directly on beach | Cruising |