Eisboch wrote:

"HK" wrote in message
m...

The senator was absolutely correct. That general would not have
addressed a male senator as mister. If he wanted to use that form of
speech, he could have properly and respectfully addressed her as Madam
Senator, madam being the full form of ma'am. "Senator," would have
been sufficient, as would have "Senator Boxer."

There is a protocol for addressing officials, and the fact that you
and the other uneducated ****s don't know it doesn't excuse those who
should know from not knowing.



You can tell by listening to the General that he addressed her as
"ma'am" purposely to indicate disrespect for her or her official
title. Sure he did.

He screwed up, that's all. A simple, innocent and human mistake.
I am sure this is hard to understand by those who never make mistakes.

Eisboch

During the exact same committee meeting General Walsh referred to the
male Senators at the hearing as "sir" without receiving even a dirty
look for any faux pas in protocol. Sure the correct protocol would have
been Senator, but the male senators focused on the purpose of the
meeting, instead of worrying about someone inadvertently using the wrong
title.


--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in
no way are to be considered flaws or defects

On Jun 18, 1:56*pm, "Reginald P Smithers III, Esq."
wrote:
Eisboch wrote:

"HK" wrote in message
om...

The senator was absolutely correct. That general would not have
addressed a male senator as mister. If he wanted to use that form of
speech, he could have properly and respectfully addressed her as Madam
Senator, madam being the full form of ma'am. "Senator," would have
been sufficient, as would have "Senator Boxer."

There is a protocol for addressing officials, and the fact that you
and the other uneducated ****s don't know it doesn't excuse those who
should know from not knowing.

You can tell by listening to the General that he addressed her as
"ma'am" purposely to indicate disrespect for her or her official
title. * *Sure he did.

He screwed up, that's all. *A simple, innocent and human mistake.
I am sure this is hard to understand by those who never make mistakes.

Eisboch

During the exact same committee meeting General Walsh referred to the
male Senators at the hearing as "sir" without receiving even a dirty
look for any faux pas in protocol. *Sure the correct protocol would have
been Senator, but the male senators focused on the purpose of the
meeting, instead of worrying about someone inadvertently using the wrong
title.

--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in
no way are to be considered flaws or defects

No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.

Frogwatch wrote:


No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.


Just curious, what have you "invented" for which you have been issued a
patent or patents that might be something that interests me as a boater.
or even just an ordinary consumer and buyer of
computer/electronic/photographic technology?

I mean, you talk a lot about inventions, and you surely have put forth a
number of less than half baked ideas for products that might be of
interest here. Which have you developed to fruition? Who is selling
them? What is their brand name? How many units have been sold?

On Jun 18, 2:34*pm, HK wrote:
Frogwatch wrote:

No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.

Just curious, what have you "invented" for which you have been issued a
patent or patents that might be something that interests me as a boater.
or even just an ordinary consumer and buyer of
computer/electronic/photographic technology?

I mean, you talk a lot about inventions, and you surely have put forth a
number of less than half baked ideas for products that might be of
interest here. Which have you developed to fruition? Who is selling
them? What is their brand name? How many units have been sold?

Maybe he'll answer those questions when you answer questions like:

Do you have any evidence of attending Yale?
Where would someone find out about your father's marina?
Where would someone find out about his hand built boats?
Where would someone find out about his alleged fireboat welcome in
NYC?
Where would someone go to see your infamous lobster boat?
Where would someone go to find any evidence of your competitive
sailing?

On Jun 18, 2:40*pm, Loogypicker wrote:
On Jun 18, 2:34*pm, HK wrote:

Frogwatch wrote:

No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.

Just curious, what have you "invented" for which you have been issued a
patent or patents that might be something that interests me as a boater..
or even just an ordinary consumer and buyer of
computer/electronic/photographic technology?

I mean, you talk a lot about inventions, and you surely have put forth a
number of less than half baked ideas for products that might be of
interest here. Which have you developed to fruition? Who is selling
them? What is their brand name? How many units have been sold?

Maybe he'll answer those questions when you answer questions like:

Do you have any evidence of attending Yale?
Where would someone find out about your father's marina?
Where would someone find out about his hand built boats?
Where would someone find out about his alleged fireboat welcome in
NYC?
Where would someone go to see your infamous lobster boat?
Where would someone go to find any evidence of your competitive
sailing?

For Harry: Go to the USPTO website, click on search. go to the
keyword input spot and put in:"David OHara, X-ray" and you will see.
Otherwise, you can go to my company website by googling "Parallax
Research, Inc., X-ray".
As far as who is selling our products, that is always proprietary (We
have NDA in place so I cannot tell you) but they are the largest names
in analytical instrumentation and in the semiconductor business.
I do not try to develop consumer products because I admit to being
"aesthetically challenged" meaning I have poor taste.
Nothing of interest to boaters unless you are a materials science
person. My first attempt to patent was for an anti-fouling compund to
be applied while the boat was in the water. I personally did the
search and found it had already been developed by a British company.
Since then I have stuck to x-ray stuff that pays my bills. I think 6
patents and 3 in the works.

Frogwatch wrote:
..

Froggy,
I would be VERY VERY careful providing Harry with ANY personal info.

--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in
no way are to be considered flaws or defects

On Jun 18, 3:02*pm, "Reginald P Smithers III, Esq."
wrote:
Frogwatch wrote:

.

Froggy,
I would be VERY VERY careful providing Harry with ANY personal info.

--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in
no way are to be considered flaws or defects

I have posted my real name and web site before and nothing happed.
That is as far as I will go.

On Thu, 18 Jun 2009 15:02:35 -0400, "Reginald P Smithers III, Esq."
wrote:

Frogwatch wrote:
.

Froggy,
I would be VERY VERY careful providing Harry with ANY personal info.

I most fervently agree with that post.
--

John H

Frogwatch wrote:
On Jun 18, 2:40 pm, Loogypicker wrote:
On Jun 18, 2:34 pm, HK wrote:

Frogwatch wrote:
No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.
Just curious, what have you "invented" for which you have been issued a
patent or patents that might be something that interests me as a boater.
or even just an ordinary consumer and buyer of
computer/electronic/photographic technology?
I mean, you talk a lot about inventions, and you surely have put forth a
number of less than half baked ideas for products that might be of
interest here. Which have you developed to fruition? Who is selling
them? What is their brand name? How many units have been sold?
Maybe he'll answer those questions when you answer questions like:

For Harry: Go to the USPTO website, click on search. go to the
keyword input spot and put in:"David OHara, X-ray" and you will see.
Otherwise, you can go to my company website by googling "Parallax
Research, Inc., X-ray".
As far as who is selling our products, that is always proprietary (We
have NDA in place so I cannot tell you) but they are the largest names
in analytical instrumentation and in the semiconductor business.
I do not try to develop consumer products because I admit to being
"aesthetically challenged" meaning I have poor taste.
Nothing of interest to boaters unless you are a materials science
person. My first attempt to patent was for an anti-fouling compund to
be applied while the boat was in the water. I personally did the
search and found it had already been developed by a British company.
Since then I have stuck to x-ray stuff that pays my bills. I think 6
patents and 3 in the works.


Yeah, I know of your x-ray stuff, since I visited your site a long time ago.

So, you've got nothing that would interest boaters or just ordinary
consumers who buy computers/electronics/photo technology for hobbies?







--
"John H" wrote in message
...

Please note that Interstate 90 will be closed this weekend across
South Dakota. This closure will allow the Federal Government free
access to haul a 200 ton piece of coal to Mt. Rushmore so that
President Obama can be added to the Presidents on the monument.
--
John H

--

John Herring, rec.boat's resident racist.

HK wrote:
Frogwatch wrote:
On Jun 18, 2:40 pm, Loogypicker wrote:
On Jun 18, 2:34 pm, HK wrote:

Frogwatch wrote:
No need to insult bitches everywhere, just refer to her as "Democratic
Senator" which is as derogatory as possible.
Just curious, what have you "invented" for which you have been issued a
patent or patents that might be something that interests me as a
boater.
or even just an ordinary consumer and buyer of
computer/electronic/photographic technology?
I mean, you talk a lot about inventions, and you surely have put
forth a
number of less than half baked ideas for products that might be of
interest here. Which have you developed to fruition? Who is selling
them? What is their brand name? How many units have been sold?
Maybe he'll answer those questions when you answer questions like:

For Harry: Go to the USPTO website, click on search. go to the
keyword input spot and put in:"David OHara, X-ray" and you will see.
Otherwise, you can go to my company website by googling "Parallax
Research, Inc., X-ray".
As far as who is selling our products, that is always proprietary (We
have NDA in place so I cannot tell you) but they are the largest names
in analytical instrumentation and in the semiconductor business.
I do not try to develop consumer products because I admit to being
"aesthetically challenged" meaning I have poor taste.
Nothing of interest to boaters unless you are a materials science
person. My first attempt to patent was for an anti-fouling compund to
be applied while the boat was in the water. I personally did the
search and found it had already been developed by a British company.
Since then I have stuck to x-ray stuff that pays my bills. I think 6
patents and 3 in the works.


Yeah, I know of your x-ray stuff, since I visited your site a long time
ago.

So, you've got nothing that would interest boaters or just ordinary
consumers who buy computers/electronics/photo technology for hobbies?


Can you be any more narcissistic, WAFA? This is over the top!