Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2008
Posts: 8,637
Default Icemaker Tip

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.
--

John H
  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 8,995
Default Icemaker Tip


"John H" wrote in message
news
If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.
--

John H


mmmm...better stick to making brownies & muffuns.
BTW you did check the owners manual that came with the
fridge............didn't you?


  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2008
Posts: 8,637
Default Icemaker Tip

On Fri, 29 May 2009 12:14:00 -0300, "Don White"
wrote:


"John H" wrote in message
news
If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.
--

John H


mmmm...better stick to making brownies & muffuns.
BTW you did check the owners manual that came with the
fridge............didn't you?


Nope. The fridge owner's manual probably went with the folks who
bought the fridge.

Besides, the icemaker is an add-on.

Do you find it absolutely necessary to be a little smart ass? Harry
would probably still love you if you just acted normally. You proved
you could do it with your post about your rat problem.
--

John H
  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 2,587
Default Icemaker Tip

On Fri, 29 May 2009 10:59:08 -0400, John H
wrote:

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.


I have a Sub-Zero fridge and the freezer stays at -2, about the
coldest at which ice cream is soft enough to dish up. The nicest
feature of the box is that it is made of high grade stainless, and
magnets won't stick to it.

Casady
  #5   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2007
Posts: 7,892
Default Icemaker Tip

On May 29, 11:50*am, John H wrote:
On Fri, 29 May 2009 12:14:00 -0300, "Don White"





wrote:

"John H" wrote in message
news
If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.
--


John H


mmmm...better stick to making brownies & muffuns.
BTW *you did check the owners manual that came with the
fridge............didn't you?


Nope. The fridge owner's manual probably went with the folks who
bought the fridge.

Besides, the icemaker is an add-on.

Do you find it absolutely necessary to be a little smart ass? Harry
would probably still love you if you just acted normally. You proved
you could do it with your post about your rat problem.
--

John H- Hide quoted text -

- Show quoted text -


Once a horse's ass, always a horse's ass.


  #6   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2008
Posts: 8,637
Default Icemaker Tip

On Fri, 29 May 2009 11:13:51 -0500, Richard Casady
wrote:

On Fri, 29 May 2009 10:59:08 -0400, John H
wrote:

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.


I have a Sub-Zero fridge and the freezer stays at -2, about the
coldest at which ice cream is soft enough to dish up. The nicest
feature of the box is that it is made of high grade stainless, and
magnets won't stick to it.

Casady


--
John H

"The problem with Socialism is that you eventually run out of other people’s money." --Margaret Thatcher
  #7   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Aug 2008
Posts: 8,637
Default Icemaker Tip

On Fri, 29 May 2009 11:13:51 -0500, Richard Casady
wrote:

On Fri, 29 May 2009 10:59:08 -0400, John H
wrote:

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.


I have a Sub-Zero fridge and the freezer stays at -2, about the
coldest at which ice cream is soft enough to dish up. The nicest
feature of the box is that it is made of high grade stainless, and
magnets won't stick to it.

Casady


Is there a reason to keep it set so low? Seems like it would just be a
waste of electricity and,
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;...contribute to.....GLOBAL WARMING!!!!!!!!!!!!!!
--
John H

"The problem with Socialism is that you eventually run out of other people’s money." --Margaret Thatcher
  #8   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2008
Posts: 1,027
Default Icemaker Tip

On May 29, 12:13*pm, Richard Casady
wrote:
On Fri, 29 May 2009 10:59:08 -0400, John H
wrote:

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.


I have a Sub-Zero fridge and the freezer stays at -2, about the
coldest at which ice cream is soft enough to dish up. The nicest
feature of the box is that it is made of high grade stainless, and
magnets won't stick to it.

Casady


The problem with stainless is that it is hard to keep clean and shows
fingerprints easily. We bought a new fridge a while back and opted
for the "satina" finish, which looks like stainless but without all
the issues. And it is magnetic... another plus!
  #9   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 2,587
Default Icemaker Tip

On Fri, 29 May 2009 13:55:17 -0400, John H
wrote:

Is there a reason to keep it set so low? Seems like it would just be a
waste of electricity and,


Stuff will keep twice as long at 0 as at 10. Basic law of chemical
reactions and temperature. Ice cream lasts much better, the growth of
the ice crystals is slower. As for wasted juice, there are separate
refrigeration systems for the freezer and the fridge, which helps
some. Theoretically, zero will take a sixth more juice than ten,
assuming a 70 degree room. If you want your stuff to keep for a long
time -30 is worthwhile.

The name of the manufacturer is Sub-Zero and it is by far the best.
The name should tell you something.

Casady
  #10   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 2,587
Default Icemaker Tip

On Fri, 29 May 2009 11:13:46 -0700 (PDT), wrote:

On May 29, 12:13*pm, Richard Casady
wrote:
On Fri, 29 May 2009 10:59:08 -0400, John H
wrote:

If your icemaker in your fridge stops working, check the freezer
temperature. Mine stopped working, and after googling and researching
possible causes, I came across a tip that said the freezer temp had to
be less than 17F for the icemaker to work. I checked the temp. It was
21-22 degrees, so I turned the setting a notch colder. Soon the temp
was down to about 8F, and damn if the thing didn't start working. By
this morning it had filled half the container.


I have a Sub-Zero fridge and the freezer stays at -2, about the
coldest at which ice cream is soft enough to dish up. The nicest
feature of the box is that it is made of high grade stainless, and
magnets won't stick to it.

Casady


The problem with stainless is that it is hard to keep clean and shows
fingerprints easily. We bought a new fridge a while back and opted
for the "satina" finish, which looks like stainless but without all
the issues. And it is magnetic... another plus!


There is magnetic stainless. Diaper pins are made from it, it is good
enough for that. It isn't as corrosion resistant, something to
remember when you buy hose clamps for the boat. Take a magnet when you
shop. Magnetic is a plus only if you want the box to look like the
inside of a wastebasket

Casady
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 09:23 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017