Latest Krause Trick
 

Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:

Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner



You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
....its not even in your the cross post list. Most of your posts are not.
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.

**** off, ****mere. Its no wonder they call you Bloater.

Gunner
--
** Good Day! **

John H

Latest Krause Trick
 

On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking



On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not.
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.

**** off, ****mere. *Its no wonder they call you Bloater.

Gunner
--
** Good Day! **

* * John H

Is Harry in your head 24x7? I think so.

Latest Krause Trick
 

On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:

On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking



On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not.
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.

**** off, ****mere. *Its no wonder they call you Bloater.

Gunner
--
** Good Day! **

* * John H

Is Harry in your head 24x7? I think so.

Thought you were leaving. Another lie?

WAFD.
--
** Good Day! **

John H

Latest Krause Trick
 

On Dec 28, 6:29*pm, John H wrote:
On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:
On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not.

Latest Krause Trick
 

On Sun, 28 Dec 2008 15:31:21 -0800 (PST), JimH wrote:

On Dec 28, 6:29*pm, John H wrote:
On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:
On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not.
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.

**** off, ****mere. *Its no wonder they call you Bloater.

Gunner
--
** Good Day! **

* * John H

Is Harry in your head 24x7? *I think so.

Thought you were leaving. Another lie?

WAFD.

--
** Good Day! **

John H

Latest Krause Trick
 

On Dec 28, 6:31*pm, JimH wrote:
On Dec 28, 6:29*pm, John H wrote:



On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:
On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.

Latest Krause Trick
 

snipped

JimH, bet or no bet?
--
** Good Day! **

John H

Latest Krause Trick
 

JimH wrote:
On Dec 28, 7:25 pm, John H wrote:
On Sun, 28 Dec 2008 15:42:48 -0800 (PST), JimH wrote:
On Dec 28, 6:31 pm, JimH wrote:
On Dec 28, 6:29 pm, John H wrote:
On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:
On Dec 28, 6:10 pm, John H wrote:
Go to the other newsgroups to solicit folks to come he
This was posted to:alt.machines.cnc,rec.crafts.metalworking
On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:
Lets compare the ethics of two presidential pardons. Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?
WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.
No reasoning whatsoever, just bull****, on the Democrat side
Thanks Bloater for the admission
Gunner
You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.
Gunner's answer was very appropriate:
So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.
Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not.
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.
**** off, ****mere. Its no wonder they call you Bloater.
Gunner
--
** Good Day! **
John H
Is Harry in your head 24x7? I think so.
Thought you were leaving. Another lie?
WAFD.
--
** Good Day! **
John H
Start acting like the grown up old man you are, not a 9 year old girl.
Can you do it? Bet?
I guess not.
Let's go for $500 that I can go longer without name-calling than Harry can.
OK? Bet?
--
** Good Day! **

John H

Why do you need to resort to name calling at all? After all you are a
grown man, a grandparent......try acting the part.

I love this, a post where you tell JohnH to stop calling others names,
and in the thread you are calling JohnH a "9 yr old girl". Too cute,
but it does remind me a Harry.

Latest Krause Trick
 

On Dec 28, 6:22*pm, JimH wrote:
On Dec 28, 6:10*pm, John H wrote:





Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.
I notice you have largely worn out your welcome on the boat newsgroup,
...its not even in your the cross post list. Most of your posts are not..
One assumes you have come over to the metalworking groups, and left out
your boat group, because you really didnt want the other there, who
already hold you in deep contempt, from seeing you get your ass handed
to you in such a regular fashion.

**** off, ****mere. *Its no wonder they call you Bloater.

Gunner
--
** Good Day! **

* * John H

Is Harry in your head 24x7? *I think so.- Hide quoted text -

- Show quoted text -

I see you come here to do just what you whine about.....

Latest Krause Trick
 

On Dec 28, 6:31*pm, JimH wrote:
On Dec 28, 6:29*pm, John H wrote:





On Sun, 28 Dec 2008 15:22:54 -0800 (PST), JimH wrote:
On Dec 28, 6:10*pm, John H wrote:
Go to the other newsgroups to solicit folks to come he

This was posted to:alt.machines.cnc,rec.crafts.metalworking

On Fri, 26 Dec 2008 22:47:25 -0500, Boater wrote:
Gunner Asch wrote:
On Fri, 26 Dec 2008 17:14:11 -0500, Boater
wrote:

Lets compare the ethics of two presidential pardons. *Rich was
pardoned by Clinton after he cheated the USA out of 250 million in
taxes. *Later, Rich made campaign contributions to Hillary.
Bush pardons this guy and then finds he contributed $25,000 to the RNC
and rescinds the pardon.
Who is more ethical?
Are Dems even capable of reasoning?

WMDs, Katrina aftermath, destruction of the economy, denial of science,
Terry Schiavo.

No reasoning whatsoever, just bull****, on the Democrat side

Thanks Bloater for the admission

Gunner

You ought to consider posting directly on rec.boats, gummy. You'll find
a pestilence of posters who share your imbecilic politics and view of
the world. No need to have or even be interested in boats...there are
many there in that category.

Gunner's answer was very appropriate:

So why are you posting into the metalworking newsgroups? Id be terribly
surprised if you could operate a cordless drill motor without a
catastrophic accident, let alone machinery weighing many tons and
holding microns of accuracy when cutting metals.

Frankly, your constant crossposting into the two metalworking groups and
showing everyone your ass, appears to be a pathetic cry for attention.