|
Fugawi 4
Hi,
I am using Fugawi 4.1. I used to be able to set a series of route points and the auto-pilot would follow these without problem. I installed a Noland Multiplexer, so I could interface my depthsounder and have depths in the tracks instead of height. This all works well. However I now find Fugawi will no longer follow the route with the auto-pilot. I tried another Nav Program (OziExplorer) and although the function is rated 'experimental' it works just as it should. I have written to Fugawi, but there support is very poor and the contact staff do not know much about anything ( they even said Fugawi does not use the Autopilot APB sentence. It does of course and is listed in the manual and help files. ). I have had so much trouble with this buggy software they probably consider me a nuisance. I probably should buy something else but I like the interface of Fugawi and am used to it, I really do not want to learn another software. If anybody has a solution or has had this problem I sure would like to get a cure. Thanks Oliver Fleming |
Fugawi 4
Try lowering your baud rate. I had this happen and all I had to do was
adjust the baud. Silver |
Fugawi 4
Here are the log files from both programs. I have set a waypoint and told
the programs to navigate to it. Bear in mind OziExplorer works and Fugawi does not. I would like to know what to do to get it going. ------------------------------------------------------------------------ OziExplorer Log File --------- In - $GPRMB,A,,,,,,,,,,,,*27 In - $GPGLL,2755.439,S,15324.368,E,050944,A*3C In - $GPAPB,A,,,,N,,,,,,,,,*4B In - $SDDBT,,,0001.5,M,, In - $GPBWC,050946,,,,,,T,,M,,N,*18 In - $GPVTG,322,T,309,M,00.0,N,,*12 *In - $GPRMC,050946,A,2755.439,S,15324.368,E,00.0,322,08 0508,13,E*66 Out - $GPAPB,A,A,0.00,L,N,V,V,344.5,M,1,344.5,M,344.5,M* 0C ---------- -------------------------------------------------------------------------- Fugawi Log file. $GPAPB,A,,,,N,,,,,,,,,*4B $SDDBT,,,0001.6,M,, $GPBWC,045845,,,,,,T,,M,,N,*1E $GPVTG,320,T,307,M,00.0,N,,*1E $GPRMC,0458$GPGLL,2755.439,S,15324.368,E,045845,A* 38 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045847,,,,,,T,,M,,N,*1C $SDDBT,,,0001.6,M,, $GPVTG,026,T,013,M,00.0,N,,*1D $GPRMC,045847,A,2755.439,S,1$GPGGA,045849,2755.439 ,S,15324.368,E,2,6,01,+0004,M,,M,,*59 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045849,,,,,,T,,M,,N,*12 $SDDBT,,,0001.5,M,, $GPGLL,2755.439,S,15324.368,E,045849,A*34 $GPGGA,045851,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045851,,,,,,T,,M,,N,*1B $SDDBT,,,0001.5,M,, $GPGGA,045853,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*52 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045853,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, $GPGGA,045855,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045855,,,,,,T,,M,,N,*1F $SDDBT,,,0001.5,M,, $GPGGA,045857,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045857,,,,,,T,,M,,N,*1D $SDDBT,,,0001.5,M,, $GPGGA,045859,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*58 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045859,,,,,,T,,M,,N,*1$SDDBT,,,0001.6,M,, $GPGGA,045901,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045901,,,,,,T,,M,,N,*1F $SDDBT,,,0001.6,M,, $GPGGA,045903,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045903,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,, $GPGGA,045905,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045905,,,,,,T,,M,,N,*1B $SDDBT,,,0001.5,M,, $GPGGA,045906,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*53 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045906,,,,,,T,,M,,N,*18 $SDDBT,,,0001.6,M,, $GPGGA,045908,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*5D $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045908,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, $GPGGA,045910,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045910,,,,,,T,,M,,N,*1F $SDDBT,,,0001.5,M,, $GPGGA,045912,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045912,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,, $GPGGA,045914,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045914,,,,,,T,,M,,N,*1B $SDDBT,,,0001.6,M,, $GPGGA,045916,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*52 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045916,,,,,,T,,M,,N,*19 $SDDBT,,,0001.5,M,, $GPGGA,045918,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*5C $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045918,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, $GPGGA,045920,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*58 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045920,,,,,,T,,M,,N,*1C $SDDBT,,,0001.5,M,, $GPGGA,045922,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5A $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045922,,,,,,T,,M,,N,*1E$SDDBT,,,0001.6,M,, $GPGGA,045924,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5C $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045924,,,,,,T,,M,,N,*18 $SDDBT,,,0001.6,M,, $GPGGA,045926,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*51 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045926,,,,,,T,,M,,N,*1A $SDDBT,,,0001.6,M,, $GPGGA,045928,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*50 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045928,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, $GPGGA,045930,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*59 $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045930,,,,,,T,,M,,N,*1D $SDDBT,,,0001.5,M,, $GPGGA,045932,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5B $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045932,,,,,,T,,M,,N,*1F$SDDBT,,,0001.5,M,, $GPGGA,045934,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5D $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045934,,,,,,T,,M,,N,*19 $SDDBT,,,0001.5,M,, $GPGGA,045936,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5F $GPAPB,A,,,,N,,,,,,,,,*4B $GPBWC,045936,,,,,,T,,M,,N,*1B ---------------------------------------------------------------------- Any help appreciated. Thanks Oliver Fleming "Oliver Fleming" wrote in message news:Se-dnedGnpt_4ofVnZ2dnUVZ_hCdnZ2d@internode... Hi, I am using Fugawi 4.1. I used to be able to set a series of route points and the auto-pilot would follow these without problem. I installed a Noland Multiplexer, so I could interface my depthsounder and have depths in the tracks instead of height. This all works well. However I now find Fugawi will no longer follow the route with the auto-pilot. I tried another Nav Program (OziExplorer) and although the function is rated 'experimental' it works just as it should. I have written to Fugawi, but there support is very poor and the contact staff do not know much about anything ( they even said Fugawi does not use the Autopilot APB sentence. It does of course and is listed in the manual and help files. ). I have had so much trouble with this buggy software they probably consider me a nuisance. I probably should buy something else but I like the interface of Fugawi and am used to it, I really do not want to learn another software. If anybody has a solution or has had this problem I sure would like to get a cure. Thanks Oliver Fleming |
Fugawi 4
In the Fugawi log, all the significant parameters in the NMEA APB sentence
are missing. There is no auto pilot that can steer to a waypoint with this data. Wout "Oliver Fleming" wrote in message news:pZ6dnQWuYdA_A77VnZ2dnUVZ_hisnZ2d@internode... | Here are the log files from both programs. I have set a waypoint and told | the programs to navigate to it. | | Bear in mind OziExplorer works and Fugawi does not. I would like to know | what to do to get it going. | ------------------------------------------------------------------------ | OziExplorer Log File | --------- | In - $GPRMB,A,,,,,,,,,,,,*27 | In - $GPGLL,2755.439,S,15324.368,E,050944,A*3C | In - $GPAPB,A,,,,N,,,,,,,,,*4B | In - $SDDBT,,,0001.5,M,, | In - $GPBWC,050946,,,,,,T,,M,,N,*18 | In - $GPVTG,322,T,309,M,00.0,N,,*12 | *In - $GPRMC,050946,A,2755.439,S,15324.368,E,00.0,322,08 0508,13,E*66 | Out - $GPAPB,A,A,0.00,L,N,V,V,344.5,M,1,344.5,M,344.5,M* 0C | ---------- | -------------------------------------------------------------------------- | Fugawi Log file. | $GPAPB,A,,,,N,,,,,,,,,*4B | $SDDBT,,,0001.6,M,, | $GPBWC,045845,,,,,,T,,M,,N,*1E | $GPVTG,320,T,307,M,00.0,N,,*1E | $GPRMC,0458$GPGLL,2755.439,S,15324.368,E,045845,A* 38 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045847,,,,,,T,,M,,N,*1C | $SDDBT,,,0001.6,M,, | $GPVTG,026,T,013,M,00.0,N,,*1D | $GPRMC,045847,A,2755.439,S,1$GPGGA,045849,2755.439 ,S,15324.368,E,2,6,01,+000 4,M,,M,,*59 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045849,,,,,,T,,M,,N,*12 | $SDDBT,,,0001.5,M,, | $GPGLL,2755.439,S,15324.368,E,045849,A*34 | $GPGGA,045851,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045851,,,,,,T,,M,,N,*1B | $SDDBT,,,0001.5,M,, | $GPGGA,045853,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*52 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045853,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, | $GPGGA,045855,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045855,,,,,,T,,M,,N,*1F | $SDDBT,,,0001.5,M,, | $GPGGA,045857,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045857,,,,,,T,,M,,N,*1D | $SDDBT,,,0001.5,M,, | $GPGGA,045859,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*58 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045859,,,,,,T,,M,,N,*1$SDDBT,,,0001.6,M,, | $GPGGA,045901,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045901,,,,,,T,,M,,N,*1F | $SDDBT,,,0001.6,M,, | $GPGGA,045903,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045903,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,, | $GPGGA,045905,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045905,,,,,,T,,M,,N,*1B | $SDDBT,,,0001.5,M,, | $GPGGA,045906,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*53 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045906,,,,,,T,,M,,N,*18 | $SDDBT,,,0001.6,M,, | $GPGGA,045908,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*5D | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045908,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, | $GPGGA,045910,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*54 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045910,,,,,,T,,M,,N,*1F | $SDDBT,,,0001.5,M,, | $GPGGA,045912,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*56 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045912,,,,,,T,,M,,N,*1D$SDDBT,,,0001.5,M,, | $GPGGA,045914,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*50 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045914,,,,,,T,,M,,N,*1B | $SDDBT,,,0001.6,M,, | $GPGGA,045916,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*52 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045916,,,,,,T,,M,,N,*19 | $SDDBT,,,0001.5,M,, | $GPGGA,045918,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*5C | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045918,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, | $GPGGA,045920,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*58 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045920,,,,,,T,,M,,N,*1C | $SDDBT,,,0001.5,M,, | $GPGGA,045922,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5A | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045922,,,,,,T,,M,,N,*1E$SDDBT,,,0001.6,M,, | $GPGGA,045924,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5C | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045924,,,,,,T,,M,,N,*18 | $SDDBT,,,0001.6,M,, | $GPGGA,045926,2755.439,S,15324.368,E,2,6,01,+0004, M,,M,,*51 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045926,,,,,,T,,M,,N,*1A | $SDDBT,,,0001.6,M,, | $GPGGA,045928,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*50 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045928,,,,,,T,,M,,N,*1$SDDBT,,,0001.5,M,, | $GPGGA,045930,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*59 | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045930,,,,,,T,,M,,N,*1D | $SDDBT,,,0001.5,M,, | $GPGGA,045932,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5B | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045932,,,,,,T,,M,,N,*1F$SDDBT,,,0001.5,M,, | $GPGGA,045934,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5D | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045934,,,,,,T,,M,,N,*19 | $SDDBT,,,0001.5,M,, | $GPGGA,045936,2755.439,S,15324.367,E,2,6,01,+0004, M,,M,,*5F | $GPAPB,A,,,,N,,,,,,,,,*4B | $GPBWC,045936,,,,,,T,,M,,N,*1B | ---------------------------------------------------------------------- | | Any help appreciated. | Thanks | Oliver Fleming | | | | | | | "Oliver Fleming" wrote in message | news:Se-dnedGnpt_4ofVnZ2dnUVZ_hCdnZ2d@internode... | Hi, | I am using Fugawi 4.1. I used to be able to set a series of route | points and the auto-pilot would follow these without problem. | | I installed a Noland Multiplexer, so I could interface my depthsounder | and have depths in the tracks instead of height. | | This all works well. | | However I now find Fugawi will no longer follow the route with the | auto-pilot. | | I tried another Nav Program (OziExplorer) and although the function is | rated 'experimental' it works just as it should. | | I have written to Fugawi, but there support is very poor and the | contact staff do not know much about anything ( they even said Fugawi does | not use the Autopilot APB sentence. It does of course and is listed in the | manual and help files. ). I have had so much trouble with this buggy | software they probably consider me a nuisance. I probably should buy | something else but I like the interface of Fugawi and am used to it, I | really do not want to learn another software. | | If anybody has a solution or has had this problem I sure would like to | get a cure. | | Thanks | Oliver Fleming | | | | |
| All times are GMT +1. The time now is 02:49 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com