Faria tachometer sticking
My Faria tach is 3 years old and is sticking. A good hard slap gets it
going, but is hard on my hand. Is that a shot tach, or can it be lubed somehow? Thanks, Helmer |
Faria tachometer sticking
Helmer,
for the most part they are sealed units,if there is a calibration port on the back you may be able to use a precision lubricator on the movement but not likely... You can try moving the tach to a warm dry location to dry out any condensation or residual moisture, but you will probably be best served by sending it to a Speedo/instrument repair facility,and it may be cheaper to replace it before all is said and done Regards, markvictor http://groups.google.com/group/badboatbiz |
All times are GMT +1. The time now is 12:37 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com