NMEA between Navman 3100 wind and Raytheon ST6000 autopilot
Hi,
I wish to connect my Navman 3100 wind instrument to the Ratheon ST6000 autopilot so that the later can stear to wind. The Navman site gives details of which NMEA wire to where on the OEM. Is it this easy? My boat at the moment is half a world away so I cannot try it out. I have connected the Garmin GPS to the autopilot and radar as well as the laptop - piece of cake. Has anyone done this or can someone provide further input? Peter N.Z. yacht Herodotus |
"Peter Hendra" wrote in message
... Hi, I wish to connect my Navman 3100 wind instrument to the Ratheon ST6000 autopilot so that the later can stear to wind. The Navman site gives details of which NMEA wire to where on the OEM. Is it this easy? My boat at the moment is half a world away so I cannot try it out. I have connected the Garmin GPS to the autopilot and radar as well as the laptop - piece of cake. Has anyone done this or can someone provide further input? The connection will be the same as from the GPS to the autopilot. But there is one potential problem: if the autopilot has only one input, you can only connect either the GPS or the wind instrument, possibly with a changeover switch. If you want both connected, you'll need an NMEA multiplexer to combine the data from the GPS and the wind instrument into one stream on one physical connection. See www.shipmodul.com for multiplexers and visit the NMEA info page for an explanation of multiplexers and connecions. Meindert |
Peter,
I am working on this same issue with a client. Navman has informed me that their wind 3100 does not past other NMEA data through, and only output some of the wind related sentences. It should allow your autopilot hold point of sail. But to do this you will need a multiplexer as Meindert has said. Matt Colie Peter Hendra wrote: Hi, I wish to connect my Navman 3100 wind instrument to the Ratheon ST6000 autopilot so that the later can stear to wind. The Navman site gives details of which NMEA wire to where on the OEM. Is it this easy? My boat at the moment is half a world away so I cannot try it out. I have connected the Garmin GPS to the autopilot and radar as well as the laptop - piece of cake. Has anyone done this or can someone provide further input? Peter N.Z. yacht Herodotus |
"Meindert Sprang" wrote in
: See www.shipmodul.com for multiplexers and visit the NMEA info page for an explanation of multiplexers and connecions. Meindert Now I wonder just WHERE he could get one of those??.....(c; Don't forget to ask for your "Friend of Meindert" discount! -- Larry You know you've had a rough night when you wake up and you're outlined in chalk. |
"Larry W4CSC" wrote in message
... "Meindert Sprang" wrote in : See www.shipmodul.com for multiplexers and visit the NMEA info page for an explanation of multiplexers and connecions. Meindert Now I wonder just WHERE he could get one of those??.....(c; Mmmm, that wouldbe me, 40-50 dealers of mine, or 2000 dealers or so from Raymarine. Take youre pick ;-) Meindert |
What is the Model of your Garmin Gps?
|
I also have the Navman 3100 and a Raymarine ST4000+ autopilot and
Garmin 276C GPS which I have tried to connect to get the autopilot to follow the wind, but so far, I have not been able to get it to work. Otherwise, the system is fully operational, all the navigation data I need is visible on the 3100 Repeater (after Garmin fixed the BWC sentence error). I have taken the NMEA-out from the 3100 Wind instrument and led it directly to the NMEA-in on the autopilot, as when I connected the wind NMEA output onto the NMEA bus, the GPS data was affected, I assume from having 2 NMEA 'talkers' on the same bus. The direct connection from the 3100 wind to the autopilot has not worked, the autopilot complains that there is no wind information. The 3100 manual states that it outputs MVW and VPW, which should be decoded by the autopilot. I have purchased the Brookhouse NMEA multiplexer, but so far have only played with it, I just havent had time to fully connect it and get the laptop attached to see exactly what NMEA sentences are sent by the 3100 wind. Since 99% of the time, the 'steer to waypoint' function is sufficient, I have put off figuring out the 'steer to wind' on the back burner and have focused on sailing and racing the boat (J/35) rather than messing around with the electronics. As for the difficulty in hooking up the units, the Navman manuals are pretty clear on the hookup. The white wire out of the 3100 Wind is the NMEA out. The ST4000 manual is not as clear, as it has a Red and a Blue which are NMEA +ve (Red) and -ve (Blue). I've hooked the NMEA-out to both the red and blue and hooked up the NMEA (-) to each also, but so far have not had any luck in getting it to work. Maybe someone more gizmo savvy can explain +ve and -ve... Good luck, I plan on spending some serious time working on the boat soon, and maybe I will have time to get the Brookhouse multiplexer to work. |
wrote in message
... I have taken the NMEA-out from the 3100 Wind instrument and led it directly to the NMEA-in on the autopilot, as when I connected the wind NMEA output onto the NMEA bus, the GPS data was affected, I assume from having 2 NMEA 'talkers' on the same bus. Indeed, that is not possible, therefore you need a multiplexer. As for the difficulty in hooking up the units, the Navman manuals are pretty clear on the hookup. The white wire out of the 3100 Wind is the NMEA out. The ST4000 manual is not as clear, as it has a Red and a Blue which are NMEA +ve (Red) and -ve (Blue). I've hooked the NMEA-out to both the red and blue and hooked up the NMEA (-) to each also, but so far have not had any luck in getting it to work. Maybe someone more gizmo savvy can explain +ve and -ve... The input of the ST4000 is isolated from the system, therefore the terminals are called +ve and -ve instead of in and ground. To connect the 3100, hook up the NMEA out from the 3100 to the +ve of the ST4000 and connect the ground/com of teh 3100 to the -ve of teh ST4000. See www.shipmodul.com/en/connections.html. Your case resembles Fig.4: single-ended to differential. Substitute "multiplexer" with "ST4000". Meindert |
On 27 Jun 2005 05:07:44 -0700, "Pascal" wrote:
What is the Model of your Garmin Gps? The boat is half a world away at present but I am sure that it is a 128 - the one with the external aerial. |
Gentlemen,
Thank you very much for your advice. It is at times like this that I realise what I am missing whilst cruising. To be able to just ask a question when a problem arises and have it answered almost immediately by a host of people who are happy to share their expertise and experience is something I am not looking forward to losing again. There are only a couple of things we miss whilst crusing - the net and good libraries. I used to grow lilies as a hobby as well as fresh herbs but can compensate by visits to public gardens, but cheap and ready access to the web is difficult unless one has a sat phone and unlimited funds. Its a bit like the Archilles factor - do you stay home in a secure job with all the trimmings of our modern technical civilisation or go sailing in a small boat which can be uncomfotable and even frightening at times and experence the places one wishes. We call it "Hobson's choice" but I am unsure if that means anything to an American. Nah! Buggar it! I have just had a vision of a hurried trip to New York when I was at a IT conference in Boston. The short time I spent at the Met. museum, climbing over the Peking by the Brooklyn Bridge as well as the two day visit to Mystic Seaport are reminders that we have made the right decision. You can keep the hot dogs and Starbucks coffee though, but I do like the cheap coffee and doughnuts for breakfast as well as spareribs in all those delicious sauces. Thanks again |
All times are GMT +1. The time now is 04:44 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com